This video made this job look far simpler than I found it. I used this procedure on a 6 year old seat exeo which has the same suspension and despite using plenty of WD40, an impact wrench and eventually a plumbers blowtorch the head came off the pichbolt (when half out but still stuck). I would advise anyone considering this job to pre lube the pinch bolts long before attempting this procedure, look up the various techniques to aid in pinch bolt removal (such as washers between the slits to stop pinching and potentially using an air hammer on the other end). There are plenty of horror stories for good reason with pinch bolts on this car. I wish I knew this first as I would likely have got the pinch bolt out first time rather than having to get it drilled out.
@autodocuk7 жыл бұрын
Thank you for the feedback! Your opinion and remarks are very important for us. We will take them into consideration for our next tutorial. Best regards, Autodoc.
@johngraham80527 жыл бұрын
autodoc.co.uk Despite my comment, thank you for posting these very informative tutorials. I will definitely considering purchasing from yourselves when I need parts in the future.
@autodocuk7 жыл бұрын
Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.
@alexnagle5753 жыл бұрын
This video was informative, I used it to remove and replace the suspension assembly. My pinchbolts were immovable, but I was able to drop the strut and access the top by manipulating the whole assembly out, leaving the top control arms in place. Not ideal I suppose, but I didn't have to worry about the pinchbolts.
@autodocuk3 жыл бұрын
Thank you for charing with your experience. Stay tuned with us. AUTODOC
@GarthGoldberg8 жыл бұрын
That pinch bolt on the upper A-arm came out easily. I thought that usually it's seized on these B-6's and Passats and you need a $300 Klann tool to get that bolt out.
@srxxx13268 жыл бұрын
they make it look simple but in reality its not. I've had problems with that bolt in the past
@autodocuk8 жыл бұрын
This video is considered to be an informative one. We are trying to show the sequence of repair work, rather than the twisting processes of rusty bolt connections. Best regards, Autodoc.
@autodocuk8 жыл бұрын
During the disassembly of many units, use a penetrating lubricant, for instance WD40. This will help you to save some time for demounting. Best regards, Autodoc.
@scottboswell87847 жыл бұрын
Would this be the same for a B8 A4??
@autodocuk6 жыл бұрын
Thank you for the feedback! To give you an answer, we need to know more information about your car and its configuration. Stay tuned and follow our latest updates. Best regards, Autodoc.
@OTTEHOK_Ceporo7 жыл бұрын
I am wont wiev rear replece!
@autodocuk7 жыл бұрын
Thank you for the feedback!Stay tuned and follow our latest updates.Best regards, Autodoc.