B7 Audi A4 How to Replace The Rear Shocks 2005-2008

Step by step guide on How to Replace The Rear Shocks on a B7 Audi A4. I replaced the blown rear shocks and also installed some new bump stops. This should be applicable on the Audi A4 quattro's from these years 2002-2008.
//SUPPORT THE CHANNEL
Get CWB Merch and Custom Parts Here: craftyworkshop...
Support on Patreon: / craftyworkshopbuilds
//RELATED VIDEOS
B7 Audi A4 Top10 Common Problems - • 2005-2008 B7 Audi A4 2...
How to Replace Valve Cover Gasket - • 2005-2008 B7 Audi A4 2...
How to Replace the Front Shocks - • B7 Audi A4 Front Shock...
//TOOLS & PARTS USED
Slim Flashlight - amzn.to/3nBvnDe
Wheel Hanger/Holder Tool - amzn.to/3Guvsi6
T-25 Torx Bit Socket - amzn.to/3iZpPh2
13mm 6-Point Socket - amzn.to/3hjBaIT
16mm 6-Point Socket - amzn.to/3bachNS
21mm 6-Point Socket - amzn.to/3F1Y7vf
16mm Wrench - amzn.to/3zcHbQg
21 mm Wrench - amzn.to/3INyBvx
Rear Shocks - bit.ly/3JVn4MP
Rear Bump Stop - bit.ly/3UCTvo6
Rear Shock Mount - bit.ly/3UP1hMZ
Rear Shock Boot - bit.ly/4a9EgZv
//CAMERA GEAR
○Primary Camera: Sony a6400 - amzn.to/2FYnAwb
○Lens: Sony E 18-55mm f/3.5-5.6 - amzn.to/3cpeN1Y
○Secondary Camera: GoPro HERO8 Black - amzn.to/301z2xV
○Primary Mic: Rode NT-USB-Mini - amzn.to/3x8ydkO
○Secondary Mic: BOYA by-MM1 - amzn.to/3kGS44w
○Light: VILTROX L116T - amzn.to/2RSqkh5
○Tripod: MACTREM - amzn.to/445zlWS
//STAY CONNECTED:
Instagram - / crafty.workshop.builds
Twitter - / craftyworkshopb
Facebook - / craftyworkshopbuilds
DISCLAIMER: Some links included in this description might be affiliate links. If you purchase a product I may receive a tiny commission. There is no additional charge to you! It costs you nothing but helps me big time in keeping these videos coming. Thank you for supporting my channel so I can continue to provide content.

[@SibRevs]

I know this is unrelated, but can you describe the process of a transmission fluid change on a B7 A4 Quattro? You are obviously very knowledgeable and there are no good videos on this topic. Thanks.

[@guyfrancis6883]

Thanks for the video. Well demonstrated and explained. Can I recommend the use of a protectant before reassembly. The shock mounting bracket was starting to corrode (covered in white powder). I swear by a product we have in Australia "Inox" - essentially a marine WD-40 that leaves a light oily residue. Another heavier product is "Lanox" which leaves a heavier oily residue (though it smells like mutton fat because of the lanolin). Rather than do nothing, just spray the general area in either - especially the underside. After living in Colorado for a year, I was horrified by the rust on American vehicles (some of which wouldn't get registered for the road in Queensland Australia!) - obviously a result of salting the roads because of snow and ice. This could also be used on bolts, EXCEPT where locktite is needed. I do use a lot of copper-eze (grease) if I anticipate having the remove the nut or bolt regularly. I have the opportunity to get an A4 B7 wagon for free ... but apparently the shocks are gone... hence the online "research". GF Wollongong Australia

[@patrixhush9626]

Thanks man, great explanation and I have the same flashlight, i love working with that flashlight... 👍

[@CraftyWorkshopBuilds]

Much respect! Yea, this flash light is the best, it fits into tiny spaces and I like the magnetic base.

[@Vigilant28]

I’m boutta have a Audi 2006 etc etc N you have made me confident enough to own it

[@CraftyWorkshopBuilds]

Yea, definitely. Once you address the common issues, you'll be good to go.

[@BDLCalton]

Love your work and concise instructions. Audi S-line Avant Quattro owner.

[@CraftyWorkshopBuilds]

Much respect 🙏🏾 I always like the avant, rare cars. Taken care of it.

[@SupraSav]

Proper video. Appreciate it

[@CraftyWorkshopBuilds]

Much respect, thanks for acknowledging my work.

[@SupraSav]

@@CraftyWorkshopBuilds Of course, anyone that works on Euros knows what a task they can be. Thanks again, and any e92/N54 videos are always appreciated 😉

[@marcon735]

good music, good explained but why you didn't mounted the upper side of the bumper to the shock cusion?

[@user-dm2zw1if5x]

hi i realy like your videos ,can you tel me what type of electric wrench you are use and type of yours impact , thanks ,Bart

[@JoseLopez-th9pg]

Thank you for sharing .

[@CraftyWorkshopBuilds]

Thanks for watching.

[@kaliekmiller5056]

Nice and easy to follow. I have questions on other Audi b7 concerns. Email me or give me away to get in touch with you regarding b7 wagon concerns and best ways and products to assure strong car life

[@mmatloukgwadi8777]

Thanks bro

[@timothyverneuil4294]

Hi u teach me what I didn't know thank u

[@CraftyWorkshopBuilds]

I'm happy I was able to teach you, thanks for watching!

[@djkrasi]

its GAS or OIL thanks for the video

[@ahmadm3084]

Thanks bro you saved me money 💰💪🏼💪🏼

[@CraftyWorkshopBuilds]

Much respect, I'm happy I was able to make you save money.

[@richardjones3112]

Great video,well explained.Thanks.

[@CraftyWorkshopBuilds]

Much respect and thanks for watching!

[@maksym71240]

Good job! Thank you 😊

[@edwardmusonda99]

thanks for the video I really enjoyed . can you kindly make a video on replacing ABS cables or fixing speed metre on the same Audi A4 B7. thanks in advance

[@CraftyWorkshopBuilds]

Much respect! I'll add that to the project list, I'll definitely make a video if I get the chance.

[@edwardmusonda99]

@@CraftyWorkshopBuilds alright thanks I will be very grateful

[@CraigMansfield]

Excellent. Thank you.

[@CraftyWorkshopBuilds]

Much respect 🙏

[@thelastmojican4480]

Thank you ...good video.

[@CraftyWorkshopBuilds]

Much respect!

[@oloveorlando6939]

I thought theres also a spring in the rear too ?

[@CraftyWorkshopBuilds]

Yes, there is.

[@kenseagle4169]

This guy could give lessons on how to do car repair videos.

[@CraftyWorkshopBuilds]

Much respect 👍🏽

[@dsolid0]

there's a washer on the floor that didn't get replaced

[@CraftyWorkshopBuilds]

I replaced it, I just didn't show it.

[@vontapleasant9068]

What’s the rod called you use to put back on the tire

[@CraftyWorkshopBuilds]

It's called a wheel hanger, I just added the link in the description.

[@rvbzero7]

Excellent work my brother

[@CraftyWorkshopBuilds]

Much respect 🙏