I was wondering why the oil pan wasn't in the way 😂
@runningon-dinosaurs15694 ай бұрын
Stop if your doing this at home the large aluminium block is slotted and is used to set up camber. You can buy very inexpensive alignment pins. Undo one of the small bolts first whilst the other two bolts are still tight. Fit the first alignment pin, it just screws in to the vacant hole. Now repeat with the second small bolt, then remove the big bolt. The pins are tapered and are designed to hold alignment of the lower arm. MK5 golf is the same.
@autodocuk4 ай бұрын
We are sure that your comment will be useful to many of our viewers.
@myjourneywithgod29242 жыл бұрын
Could you do one for the left side. Not as easy and simple as the right right 😭
@widget2k411 ай бұрын
no alignment tool was fitted for keeping the tracking right and im sure the torque settings are way too low on the bolts
@autodocuk11 ай бұрын
Our videos are for reference only. All routine replacements and values can be found directly in the technical documentation for your vehicle or with the help of a car service.
@user-fu8fi7wm2n7 ай бұрын
I really appreciate your guidance. Very useful.Thanks.
@vindieu Жыл бұрын
Very nice but the left side is way harder, it would have been nice to show how to avoid the blockage caused by the DSG gearbox. Also you don't mention that the bolts are one time use, and if you use power tools they can break.
@silencegarage63793 жыл бұрын
I think for us beginners you need to show us what is worn out on the parts that you remove compared to the new part ..🙏🏽
@dabay2007 ай бұрын
missing a wheel bolt at the end
@autodocuk7 ай бұрын
You are absolutely right, some points were missed, but we will definitely add this in our new videos.
@leonardosanchez4450 Жыл бұрын
Great job !
@autodocuk Жыл бұрын
We are glad that you enjoy our work!
@boriskibirin47202 жыл бұрын
Awesome
@JD-rl8kr Жыл бұрын
Great videos guys, very imformative. Would be better if that annoying music wasn’t there. As ye have to listen to it incase you miss out on what the man speaking says.
@autodocuk Жыл бұрын
Thank you for your comment, your opinion is important to us. We will fix this in our future videos.
@Shokar29063 жыл бұрын
Can I use old bolts? Or shall I use new ones?
@autodocuk3 жыл бұрын
Thank you for your feedback It is recommended that when replacing the lever, also replace the connection bots. Best Regards, Autodoc team
@alexey99004 жыл бұрын
Good 👍👍👍
@parco2324 жыл бұрын
Bravoooo
@BABZ78610 ай бұрын
Is this same for a Audi A1 1.4 Sportback???
@autodocuk10 ай бұрын
Replacement will be similar, the only thing may be slightly different in the design features of your car. More accurate information can be obtained from the technical documentation for the car or by contacting the service
@bignikoli11 ай бұрын
Anyone notice the missing wheel bolt
@neilmullin35322 жыл бұрын
wow no rust (i wish)
@Venezia1110 Жыл бұрын
This seems dangerously disengenuous to not show what it takes on the other side. Customers who are unprepared may drop wrong parts too far, damage pan, etc.