Excellent! Very clear. The graphics showing the Torque settings is a superb idea!
@christoskylar2601 Жыл бұрын
I suggest removing the Hall sensor at the bearing instead of dismantling panels to disconnect the lead from the wiring harness. It's just one small bolt to loosen with a 10mm spanner or socket and then carefully extract the fairly long sensor.
@autodocuk Жыл бұрын
When dismantling the sensor, it can be damaged.
@christoskylar2601 Жыл бұрын
@@autodocuk I tend to disagree. I've done it on both front wheels and didn't damage the sensors. The other popular Autodoc video shows to do it that way: kzbin.info/www/bejne/n6elZGWEqL2th9k#t=4m58s I'd much rather remove one M10 bolt than dismantling panels and upsetting wiring that could be left alone. I just don't see the point of doing all that extra work.
@mattbettany11748 ай бұрын
@@christoskylar2601my sensor was completely stuck and I ended up breaking it
@christoskylar2601 Жыл бұрын
A 36mm socket is needed for the wheel nut, not 38mm.
@autodocuk Жыл бұрын
We are sure that your comment will be useful for many of our viewers.