How to change front wheel bearing on NISSAN QASHQAI (J10, NJ10) [TUTORIAL AUTODOC]

[@vaughandally988]

Probably one of the best videos I've seen very clear video from start to finish, no stupid talk an shows products to use , info on torque settings little tip an tricks, thank you very much. I will use this on other job I'm working on. Thanks again.

[@autodocuk]

We are glad that this video was useful to you!

[@CinnamonCanine]

Excellent step by step with no faff. Top job cheers!

[@dancurd3857]

Just completed this job at home from only watching this video brilliant detail and easy to follow step by step awesome video many thanks 🙏🏻

[@autodocuk]

Thank you for your feedback! We are glad to hear that our video was useful for your.

[@rejectable2011]

Great video, but just one minor point. When the torque wrench clicks there's no need to keep tightening a quarter turn! :)

[@grantdufeu8015]

Excellent especially with torque settings for all nuts/bolts

[@gimigimi1299]

I would love to see more mechanics support break calipers and tie rods like here. Normally they are just hanging

[@reijoylitalo]

Kiitos hienosta videosta.

[@benmasters1980]

Great video thank you👍

[@jompy151]

Thanks , great help 👍

[@autodocuk]

[@owenhenry400]

keep it going good information thank you brother.

[@etbandit]

Thanks for the informative video. I tried changing the same wheel hub but the break calipers remained clamped onto the rotor. I tried releasing the hand break and starting the engine but the rotor was still clamped by the break pads. Is there anyway I can release the calipers? Thanks in advance.

[@michaelwalsh9145]

Stick a flat head screwdriver into the slot in front and wedge it between the disc and calliper housing to release the pressure.

[@LG-kl3co]

I think if you struggle at that point then you ought not attempt to do this operation.

[@najadjewad7106]

Very nice easy job thanks for information

[@autodocuk]

Thanks for your positive comment! Stay with us!

[@debramercer1138]

In my 2018 qashqui there is a safety feature part in the wheel that will add air into the tire if it becomes a bit low. What is this part called? Do I have to change them in all wheels when I change tires or can they be reused/put back? Thank you!

[@davidward8682]

What is the time allowed for this work

[@stuartbrooks5734]

is it true that copper grease can interfere with ABS sensors

[@autodocuk]

You're right, copper grease can interfere with abs sensors. We recommend that you clean all work surfaces before use. AUTODOC

[@crisfotiadis4340]

very nice video thanks

[@autodocuk]

Thanks for your positive comment! Stay with us! AUTODOC

[@alexey9900]

Good 👍👍👍

[@wisemannontshantsha7083]

Nissan qashqai back wheel making sound how to take off wheel bearing

[@autodocuk]

Hi! Thank you for your comment. You can watch the video at kzbin.info/www/bejne/bnfVZ419pdqGg6M&ab_channel=autodoc.co.uk

[@jubeljenz]

Does it not need grease?

[@autodocuk]

Thanks for your feedback! Please clarify your question. AUTODOC

[@GeneralG1810]

Great informative video HOWEVER..... No way on this planet would I ever reuse a nyloc nut 8:08 or split pin 9:49, they're a one and done item

[@barricadeish]

why wasn't he using impact sockets?

[@autodocuk]

In this case, ordinary heads can also be used.

[@edwardcook3489]

Torque settings are wrong 75NM on tie rod strips threads

[@autodocuk]

Yes, you are right, correct torque is 35 Nm. Thank you for your feedback!

[@jamesf9647]

Why the horrendous, unfenal mind numbing noise.. (not music!)

[@davidculmer1520]

Why bother? It’s a Nissan aka modern day Trabant. Just junk it!

[@michaelwalsh9145]

The older ones were better until Renault took over completely. The only Renault part in the older ones was the engine.