This is the quick way to change the keypad code on your chamberlain Liftmaster, Sears garage door operator. This should work from present to back in the 90's as long as there is a * and # at the bottom.
Пікірлер: 89
@user-nh4tm6hh4j3 жыл бұрын
No twenty minute intro with your life story. Straight to the point. Thanks man,
@ThinkDifferentish3 жыл бұрын
Bro thanks for not wasting any time with blah blah blah. Within 20 seconds of hitting Play on your video I had my code changed. Thanks!
@danbo23734 жыл бұрын
Finally a how to video that isn’t 15 minutes long, thanks
@cjhelh11 ай бұрын
Couldn't have been any easier thanks to your simple and to the point explanation... THANKS!!
@Itsthevinylfrontier Жыл бұрын
THANK YOU!!! Someone who gets straight to the point!
@klow528 Жыл бұрын
Best video on KZbin. This is how it’s done without all the other instructions that confuse the heck out of you.. Thank you!
@Chasarbo4 жыл бұрын
Thanks so much for this, this is the easiest thing to do. I paid quite a bit for this garage door opener but it’s worth every penny!!
@caprispillingtheteaLST Жыл бұрын
Thank you sir. Fast and straight to the point.
@FunkMasterF12 күн бұрын
Amazing. I've always climbed up the ladder like an idiot to press the Learn button. I guess that's just for the car remotes.
@davidblake788812 күн бұрын
@@FunkMasterF the older units you have to do that. The newer garage door motors you can do it from the wall console
@TheParsaver Жыл бұрын
so helpful thank you ! Straight to the point !
@djtons78802 жыл бұрын
The Best video and the only video you’ll ever need! 💯
@firstdegreesports51202 жыл бұрын
Great video straight to the point
@vickies.37017 ай бұрын
So grateful for this video. Thank you for making it!
@CENA8963 жыл бұрын
Thank you got straight to the point
@cgarrrr22742 жыл бұрын
Short and sweet. Worked for me!
@nicnatmat123Ай бұрын
Thank you for that excellent video!
@4EverEvolving15 жыл бұрын
Thank You! Was able to change it. This video made it easy.
@piebag11 ай бұрын
Well I’ll be dipped it actually works thanks boss you da man!
@johnb73465 жыл бұрын
Excellent. Thank you!
@lindajacobs1487 Жыл бұрын
THANK YOU!!! I just changed the code on mine!
@ricksanchezsflask87942 жыл бұрын
Where's the annoying music? Where's the fumbling with the camera and aiming at the ground instead of the object? Could this be an effective how to video? Well done. 😄
@davidblake78882 жыл бұрын
Yes it is!! Let me know if you need any other how to videos quick and easy!
@bo43405 жыл бұрын
Thank you. This just saved me a call to the service center!
@davidblake78885 жыл бұрын
your welcome im always ready to help. Have 30 years in the door industry. I dont know everything but know a little.
@AM-mu5oo2 жыл бұрын
This was soooo easy. Follow these instructions.
@louislee77175 жыл бұрын
When the door is open, you don't need to put in a code to close it, just hit enter. A change for this video would be to close the door and then show that the new code opens it.
@davidblake78883 жыл бұрын
You have to be able to see the light on the motor to get the flash code. If door is down you will not know that it changed
@davidblake78882 жыл бұрын
Older keypads need a code to close. The newer ones do not need the code your correct!!
@areliablesource19305 жыл бұрын
This really helped. Thank you.
@davidblake78885 жыл бұрын
Your very welcome!
@kristalewis32575 ай бұрын
Thank you😊
@kevisnixon9773 жыл бұрын
Great video buddy 👏👏👏👏👏
@Vilage122 жыл бұрын
Thanks helped me
@raynerochoa7922 жыл бұрын
Muy buen vídeo muchas Grasias me ayudó mucho con el password de mi garage de verdad muchas Grasias !!
@davidblake78882 жыл бұрын
Don’t speak Spanish but your welcome!!
@vegasjj77632 жыл бұрын
We bought our house 2 years ago. We have never used the key pad because we don't know the code. How can we program a code we want without knowing previous code?
@davidblake78882 жыл бұрын
Post a picture of your motor from the back where the learn button is and I can walk you thru it send to 3022703960
@vegasjj77632 жыл бұрын
@@davidblake7888 I sent you a text.
@weyhenmele5040 Жыл бұрын
Wow thanks bro it is helpful
@josepenate73675 жыл бұрын
your the man,,thanks sir.
@davidblake78885 жыл бұрын
very welcome.
@aydnyapc43103 жыл бұрын
Good job
@khao14122 жыл бұрын
You are the man.
@reylagos1733 Жыл бұрын
Thank you.
@jackroads24392 жыл бұрын
So to change it you must first put in your current number ? that's what I missed I think The volum is very low so I missed it
@davidblake78882 жыл бұрын
Yes. If you don’t know it you can always access the learn button on the circuit board( look for the antenna hanging down) press the learn button then program a new number. Then press the enter button and look for a single flash on the motor light bulb
@robertcoups39182 жыл бұрын
If you do this, do the openers in your cars need to be set up again ?
@davidblake78882 жыл бұрын
No should not affect other remotes
@Kateski30 Жыл бұрын
I tried to change mine with the initial setup directions and now the original code is erased and I can't program a new one. Do you have the answer to that by chance?
@ikesteroma Жыл бұрын
Brilliant! Thanks!
@Tendertroll111 ай бұрын
Thanks, do you have to reprogram the other remotes after?
@Kittyhammertoe1003 жыл бұрын
THK U
@dpdp38052 жыл бұрын
Perfect 👍 Thanks.
@madhankumar24182 жыл бұрын
Had it for over a year
@JM-ke1xm3 жыл бұрын
Thanks!
@cihannam3 жыл бұрын
Thank you ❤️
@fretMe Жыл бұрын
Legend
@Tinam71..10 ай бұрын
Thank u!!
@HailAnts10 ай бұрын
People need to understand how this works. This has *nothing* whatsoever to do with the door opening mechanism or its receiver, it is just reprogramming the keypad acceptance code. Entering the correct code tells the keypad transmitter to send the open/close signal. As long as you punch the right code into the keypad it transmits that signal to the opener. All you're doing here is just reprogramming that code on the keypad. It is not communicating with the opener while doing this in any way. It's not transmitting that four digit code to it, it _never_ does this at any time during programming or regular use! So it has absolutely no effect on any other remote transmitters you have. There are other videos which tell you to push the LEARN button on the opener unit to do this. These are incorrect. The keypad transmitter has already been 'learned' by the opener's receiver and changing the four digit code does not change what it transmits to the opener.
@topsykreets95933 жыл бұрын
Omg ty so much
@jackroads24392 жыл бұрын
If you find it so easy anyone can just come up to your door opener and program your opener . Don't have to see the light you might say lots of doors have windows where you can see the light/ Did you say the door had to be opened for it to work, just saying /
@davidblake78882 жыл бұрын
You actually need the old code to do that.
@AM-mu5oo2 жыл бұрын
Thank you!!!
@oneknock57962 жыл бұрын
Thanks
@rohitsproduction85562 жыл бұрын
My garage light doesn’t flash at all why???
@dianelove24473 жыл бұрын
Mine has a * and a # sign. But does not have an enter button. How do I change the code without an enter button?
@davidblake78883 жыл бұрын
Old code # motor light will flash twice which will put in change mode then put in your new code then press enter button center bottom. Motor light will blink ones to indicate code changed. Wait 10 seconds and try new code then hit enter and it should work. Good luck. If you can’t get it text me and I will respond 3022703960. I may be driving so when I stop I will reply since it’s illegal to text and drive👍
@davidblake78883 жыл бұрын
Unless it says “Clicker” then its a different setup
@davidblake78882 жыл бұрын
It must be the clicker brand with a 0 between the # and *
@antiloser705 жыл бұрын
My keypad is black with silver buttons and says liftmaster on the top. How do I change the code on that?
@number-ow1fo4 жыл бұрын
its the same thing
@davidblake78882 жыл бұрын
Send me a picture of it.
@davidblake78882 жыл бұрын
Sounds like a old 1985 keypad
@htoobway20793 жыл бұрын
Work with liftmaster?
@davidblake78883 жыл бұрын
Yes
@ikrarahman36722 жыл бұрын
I tried to change mine but now it’s not opening to the new or old pin
@davidblake78882 жыл бұрын
If you can take a picture of the keypad and take a picture of your motor on the ceiling backside where the antenna is hanging down. There should be a learn button. It should be Red green purple gray or yellow and send to my cell 3022703960 and I can help you reprogram
@sd89332 жыл бұрын
wow have the same problem... taugh was the batterie but style not working... nothing happened with the purple learn botton... will see tomorow morning ... Thx for the video
@janinegoldstein39392 жыл бұрын
Should backlight on keypad be red or green?
@davidblake78882 жыл бұрын
Depends on keypad. Most are a yellowish color.
@disnalee2 жыл бұрын
What if your ex dont tell you the code then are you able to reset it to a whole new code number to keep out intruder? Can you do a vid or tell steps how to reprogram it? I do not have the old code to reprogram my garage.
@ernestotomassetti87482 жыл бұрын
I have the same problem
@davidblake78882 жыл бұрын
Post a picture of the motor and keypad and I will do a video
@Howdy099x3 жыл бұрын
Can you use the same number (same code)?
@davidblake78882 жыл бұрын
Yes if you want. The reason people change the code is incase someone has it who does not need to have it.