How to change out a Honda GCV 190 Pressure Washer crank oil seal.

  Рет қаралды 20,019

Cindy Bentz

Cindy Bentz

Күн бұрын

Пікірлер: 37
@tellwinn1
@tellwinn1 Жыл бұрын
Thank you Cindy! I can't believe how easy this fix was. A known handyman in the neighborhood told us that this was a main bearing and wouldn't be worth fixing. When I took the pump off and looked at the oil seal, it appeared to be completely in tack. As soon as I touched it, it literally dropped out. It's like it shrank with use. I had more difficulty putting the pump back up, but finally moved the project to a pub height table and was able to comfortably get things aligned and it fired right up. Lesson learned for me, change the oil often.
@trhaverstock
@trhaverstock 7 ай бұрын
This video was great. Key to getting the new seal in place is not damaging it on the way in. I had a one inch pvc schedule 40 coupling in my garage that was the perfect size to drive this in uniformly. If you don't have one of these you can pick up in the plumbing section of orange box for under 75 cents. Use that and a rubber mallet and don't use excessive force. Mine was a Ryobi pressure washer with Honda GCV200 engine, part # was 91202-ZM0-V31.
@ohdeerme
@ohdeerme 3 жыл бұрын
Cindy - You did a Great job improvising as you went and got the job done. This video will help a lot of people to tackle this job themselves...........Thank you !
@easynickname09
@easynickname09 2 жыл бұрын
Same here : Thanks so much. I have the exact same model and it started leaking oil today. I look forward to making the repair. Thank you so much.
@brucerodgershimself
@brucerodgershimself Жыл бұрын
Cindy Bentz, you are a ROCKSTAR! I have the exact same model Honda power washer, and I ordered the correct Honda seal after I found your video. I'm pretty handy and have replaced seals in other things - and probably would have figured it out but... BUT! you saved me much time in lining out the process AND taking the time and effort to create a video. I had the very same problem and following your video, I had the new seal in within an hour. One additional thing I did was use a large deep socket that I had (1 1/8") to actually press the seal in, and it worked perfectly. Thank you thank you again!! Gave you a "like" AND a subscribe! 👌
@rickferko406
@rickferko406 Жыл бұрын
Good Job ! Thank you Cindy. The user manual said to take it in to a dealer. I'm a DYI'er like you. Thanks a million for the video. Going to try to get the part at a local dealer, if not, order it online. Thanks for including the Part Nbr 😊
@maxy.5166
@maxy.5166 Жыл бұрын
Excellent video, they wanted to charge me 200 for the seal replacement. Thank You
@murk5
@murk5 2 жыл бұрын
Wow, you really saved me today. I was just about to take my pressure washer to the curb. 😁😁😁 Thank you so much!
@cliffhicks17
@cliffhicks17 4 ай бұрын
Thanks for the video. My pressure washer has the Honda GX390 and it is leaking oil. I’m hoping that it’s the shaft seal.
@igoski1582
@igoski1582 4 ай бұрын
Thanks. I believe this is my oil leak. Now I have to find out where I can get a new one before I take the pump off.
@cindybentz45
@cindybentz45 4 ай бұрын
@@igoski1582 I got mine from amazon. Good luck
@igoski1582
@igoski1582 4 ай бұрын
@@cindybentz45 Thanks. That's where I will look.
@jamesfagan5694
@jamesfagan5694 3 жыл бұрын
It helps to put a little oil on the seal before inserting it
@hdtvcamera1
@hdtvcamera1 4 жыл бұрын
I think it's cool you took the project on. You technique for removing the seal is exactly what the pros do. To put the new seal in push down on both sides at the same time. It will go in easier. The gap that you called a key is referred to as a spline. The only reason I mention it is because I'm sure you will encounter it again as you appear fearless taking on repair projects. Most people would take it to a service center and pay $100. You can get the seal on Amazon for $8.
@cindybentz45
@cindybentz45 4 жыл бұрын
That’s where I got the seal. I love working on things. Thank you for letting me know it’s a spline I had no idea 🤷🏼‍♀️.
@MadelineStkitts
@MadelineStkitts 3 жыл бұрын
I appreciate your video our Ryobi machine need the same treatment. Thanks from Puerto Rico
@Sammy-ju7cv
@Sammy-ju7cv 4 ай бұрын
Great video. Is the spring piece part of the seal? Or do you have to put it back on?
@DB-xe7tc
@DB-xe7tc 8 ай бұрын
Great video. How is it changed on the honda mowers?
@bongju328
@bongju328 3 жыл бұрын
Thanks so much. I have the exact same model and it started leaking oil today. I look forward to making the repair.
@jamesfagan5694
@jamesfagan5694 3 жыл бұрын
Just got one today. Are they pretty good pressure washers?
@jeffhaught5082
@jeffhaught5082 2 жыл бұрын
Take a piece of small pipe that will jut fit over the shaft and just peck the seal into place.
@16sondra
@16sondra 2 жыл бұрын
Good job! I hope no got that dang key in right
@josegomezgonzalez8968
@josegomezgonzalez8968 8 ай бұрын
whish hardware store are you get the seals???.
@cindybentz45
@cindybentz45 8 ай бұрын
Amazon
@josegomezgonzalez8968
@josegomezgonzalez8968 8 ай бұрын
thank you .@@cindybentz45
@alexmassy1
@alexmassy1 6 ай бұрын
Any model number please 🙏
@cindybentz45
@cindybentz45 6 ай бұрын
@@alexmassy1 I just put in my motor in amazon and it came up. I don’t remember. Sorry I might have it on the video.
@waltercardenas7354
@waltercardenas7354 3 жыл бұрын
Outstanding video. What is the part number? Thanks
@agaan1897
@agaan1897 3 жыл бұрын
91202-zL8-003
@miketaylor6282
@miketaylor6282 9 ай бұрын
Seems to be a common problem when this engine is used in this application.
@geejaysf
@geejaysf Жыл бұрын
I own you beer...
@gerardomartinez8898
@gerardomartinez8898 3 жыл бұрын
What was the seal part #
@glenningram569
@glenningram569 3 жыл бұрын
Part number is 91202 ZL8 -003. A deep well socket or steel tube using a mallet will press one in more securely, use a few drops of oil.
@agaan1897
@agaan1897 3 жыл бұрын
y bought the same seal for the same machine the seal won’t go all the way through 🤔
@cindybentz45
@cindybentz45 3 жыл бұрын
Make sure the old one is all the way out
@agaan1897
@agaan1897 3 жыл бұрын
@@cindybentz45 you’re right! the other part of the seal was inside! 🙏 thanks
@cindybentz45
@cindybentz45 3 жыл бұрын
@@agaan1897 same thing happened to me. Glad you got it out
Honda GC GCV-160 190 Oil Leak and Valve Adjustment
19:49
Locker's Garage
Рет қаралды 15 М.
ТЫ В ДЕТСТВЕ КОГДА ВЫПАЛ ЗУБ😂#shorts
00:59
BATEK_OFFICIAL
Рет қаралды 3,8 МЛН
ЛУЧШИЙ ФОКУС + секрет! #shorts
00:12
Роман Magic
Рет қаралды 36 МЛН
Hoodie gets wicked makeover! 😲
00:47
Justin Flom
Рет қаралды 124 МЛН
FOREVER BUNNY
00:14
Natan por Aí
Рет қаралды 8 МЛН
Two Bad Pumps - Pressure Washer Pump Replacement
41:25
James Condon
Рет қаралды 236 М.
Pull start snatches back on Honda pressure washer
34:47
Average Joe's
Рет қаралды 48 М.
Honda GC190 - Carburetor Service and Tune-up Craftsman Pressure Washer
33:40
How to Install a Governor Shaft Seal on a Honda GCV160 Engine
12:41
Eliminator Performance
Рет қаралды 21 М.
How To: Pressure Cleaner Pump Seal Replacement
15:36
Spraywell
Рет қаралды 478 М.
Honda GCV 190 oil leak fix!
8:08
Wrenches and Rods
Рет қаралды 5 М.
Honda GCV 160 No start, No compression Fix
11:00
T Bachek
Рет қаралды 7 М.
ТЫ В ДЕТСТВЕ КОГДА ВЫПАЛ ЗУБ😂#shorts
00:59
BATEK_OFFICIAL
Рет қаралды 3,8 МЛН