How to Change REAR Brake Rotors (Discs) and Pads (Complete Guide) - DODGE GRAND CARAVAN 2008-2021

[@YouWrench]

Need parts?: Front and Rear Rotars and Pads Savers Set USA: amzn.to/3pc8hjY Canada: amzn.to/3oyIuEq Need a brake rewind kit? USA: amzn.to/3tKbnz4 Canada: amzn.to/3kKsDkZ

[@AlanElias350]

This guy is awesome. I watch these videos at least twice before i start the job. Then i watch again as i do the work

[@YouWrench]

Thank you so much! Always nice to know when your videos are appreciated. Thank you for your support! :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@rz634]

Lol same I do

[@svega1100]

Love your Videos. You have gotten me out of a couple jams and saved me so much money. Next Video Should be catalytic converter if it comes your way with the caravan. Cant really find any videos on it for the caravan your attention to detail would be appreciated. Thanks and keep up the great work.

[@rtosguy]

Thanks for the very clear video! You actually make it look like fun. I can't wait to do my brakes.

[@YouWrench]

Thank you, much appreciated! We're here to help our viewers save themselves a lot of money by helping them do the work themselves, so get stuck in and save $$$'s!!! Hopefully it will be fun too :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@Ochtane101]

Great informative video. You don’t miss anything. Nice Job!👍

[@YouWrench]

Glad you enjoyed the video :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@andyp9747]

Great video! I love these. More please!

[@garsocks]

Saved me! Great job, doing step by step.

[@YouWrench]

Thank you, glad we could help you out!! :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@Lukas-wl4oj]

Thank you, very helpful video, greetings from Europe

[@petersimms995]

Another thorough and Well Done video

[@YouWrench]

Thank you, much appreciated :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@Pringston_Channel]

thanks for your videos, please show me HOW to replace the headlight !!

[@YouWrench]

Maybe for the future! If we get enough support from our viewers we would ideally like to get a Grand Caravan in and completely strip it down and show videos for the removal of just about every part on the car. However, that costs a considerable amount, and we're not at the stage support-wise yet on KZbin (unfortunately!!) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@elvertracoma]

I changed my brake pads and rotors and had a terrible time trying to take off the caliper... I thought it was frozen or seized and considered taking it to the car dealership to repair. After scratching my head thinking what the hell do I do to get it off.. then I realized the fkn emergency brake was on... saved me hundreds of dollars lol

[@YouWrench]

Lol, yes - that would do it!!! Glad you managed to figure it out ;-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@highlandbob2470]

Why did you not a-line the piston notch to the pad pin. It should fit in.

[@YouWrench]

Hey there! Thank you for your question. This video is on a MK5 (2008-2021) Grand Caravan which have the rotating rear piston. Maybe you are thinking of the older model? But thank you for asking, we have now updated the video details to specify that it's for the MK5. Thank you again! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@robertyankus2319]

@@YouWrench The 2019 rear piston has cutout on its face that is used with a special tool to turn it back into its bore. This cutout also matches up to a small pin on the brake pad. Very few videos are aware of this. Take a close look. Thanks for responding.

[@AlanElias350]

@@YouWrench spreading the word! Im tired of getting robbed at the car dealer shop.

[@mystic24100]

My 2008 Town & Country has the pin on the brake pads and I had to line up the piston notches before it could be assembled. The driver’s side worked good. The passenger side didn’t. The piston was to far away from the pad to work. I turned it 180 degrees out and the caliper would not go on, because it was too tight on the pads ( about 1/16 of an inch). Tomorrow I will file / grind one of the pads down about 1/16 of an inch. Only thing I can think of.

[@FixItYerself]

danka

[@YouWrench]

Thank you :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@jankowalski1537]

Prawie dobrze, bo tłoczek to chyba trochę źle ustawiony, jakieś 90*

[@wst8340]

Obviously a Canadian car,Rust.

[@YouWrench]

Yes, and yes :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@Rtiomas]

Bob Ross with that grease 😂

[@guymussori6457]

My 2013 brake peddle is mushy after i replaced the rear brake pads. I pump the brake peddle and the emergency brake peddle many many times but it doesn't seem to re adjust back to normal ! What is the truck ?

[@YouWrench]

It sounds like you may have got some air bubbles in the system. I would try bleeding the brakes first of all and see if you get air bubbles coming through the line/s during the bleed. Best of luck! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!