How to change Shift Control Solenoid Valve - 1997 Honda Accord

[@eorta9134]

I have a 1998 Honda accord V6 automatic that have been driven twice in a year and have the fluids changed last May. I decided to take a drive yesterday and 10 miles into my trip the car went into neutral or something on it's own and now won't shift into any gears. we had to toll it back. This is my third transmission. But this time the results are different because when it previous went bad at least it gave me some warning or check engine light.

[@michael84003]

he already removed or moved some high pressure lines and a bracket covering the thing. And Removed the fan blade assembly. Did not show either. Also looks like he already disconnected and reconnected the electrical to make it easy. misleading all the way around. Too good to be true.

[@eagle1532]

Explain what the problem was prior to changing this shift solenoid......

[@vinnysaka]

in the beginning u took off the upper solenoid.. then at 2:06 when u compared the parts in the backroud u can see the one u showed in the beginning is still on and now u removing the bottom one... so my question is. which one is the shift control solenoid valve, the upper or lower one?.

[@MPoe-cp5ew]

The lower is the shift control solenoid. I noticed that too. This video is inaccurate. He takes the top one off then if you noticed, when he compared the parts the top one was back on and the bottom one was off and what he was showing...

[@Yvsny]

I have a 2000 honda accord ex 3.0l V6 is this solenoid in the same location as in the video or is it underneath the car?

[@TylorCollins2493]

Here’s a question for someone There are two solenoids almost identical to one another. The one he replaced and one right above it. What is the one right above it? What does it do? What’s it called? What’s it actuate? Thanks

[@korbin856]

is there a 3rd and 4th shifting solenoid location? i need to know asap.

[@davembeck]

CAN YOU PLEASE EXPLAIN TO US WHY YOUR CHANGING THIS PART AND WHAT THE ISSUE WAS? THANKS!

[@joshuaaguilar4905]

It was most likely leaking or the shift solenoids were bad and being replaced

[@davembeck]

@@joshuaaguilar4905 ok. i am having accerleration issues and my car doesnt shift properly. is this the only fix?

[@itsprobablydean]

Yo dave did you get your stuff figured out

[@itsprobablydean]

Im having roughly the same problem. Car will rev up to higher rpms but doesnt want to upshift, will only limp around in first

[@luckywhiskey]

@@itsprobablydean Did you ever figure it out?

[@gassandababneh5449]

hi can please explain about this parts the one you change if damage or not working in the car what's it's usually make to show on the car problem in the engine or only show transmission change in the wrong way please this sensor the one you change it's for what exactly what's the main reason to be changed ?

[@InnovaAuto]

+Gassan Dababneh Thank you for your inquiry. We do not have repair books for your vehicle to give you repair advice. We suggest you consult with a service book for issue you are having with your vehicle.

[@raulmejia2066]

Thank you Sir.

[@Force1Com]

Can a faulty solenoid cause a hard shift, or does it usually just cause a no shift condition? I have a friend who has a 98 Honda Accord with a V6, and there is a slight delay when it shifts into 2nd and into 3rd, even if it is shifted manually, and it causes it to shift hard. Also, as far as I know, he's never changed his fluid. I thought I would find a lot more information on youtube, since these are such popular cars, but I haven't had much luck and any advice you can give me would be appreciated.

[@InnovaAuto]

+Shi Nobi : Thank you for your inquiry. We suggest to consult with a service manual to find the proper steps to fix the issue you are having with your vehicle or give us a call at 800-544-4124 we are open 7 days a week 6am - 6pm (PST) Thank you!

[@zainabshaibu1239]

What could be The problem when Honda Accord gear change to drive the engine shut off and reverse

[@chizo5097]

Is it the same for the 2000 Honda accord ex??????

[@javyjav1977]

Will this fix the flashing D indicator on the cluster???

[@mobpad13]

Javier Guerrero speed sensor will

[@Ahmet-3467]

What is part number this Selenoid ?

[@jabbacoola1]

Don't forget the one on the bottom and you don't have to remove the fan blade shit

[@davidcarrera6178]

good friend greetings I have code 5 in D4 that will be that failure honda accord 2000

[@xturtle_17x53]

Would this be the same for a 2000 Honda Accord?

[@InnovaAuto]

+Curtis Ransom Thank you for your inquiry. We suggest to consult with a service manual to find the proper steps to fix the issue you are having with your vehicle.

[@leomulero5373]

my 1996 Honda Accord v6 transmission won't shift into drive4

[@mikeray1544]

Find a 90's car...lol.......thanks Innova, I have your 82-2010 forward/backward scanner...(obd !/2)...works well.

[@akashramcharan2807]

I hv a blinking d4 while driving wen i switch of it stops wen i start to drive it starts to blink again

[@savage2life2011]

what was the issue with this honda?

[@leomulero5373]

At 70 mph I'm tacking 32 3300 rpm's. How do i fix this

[@joemerlongcob9492]

Symptoms pls

[@Fernando-tq8wq]

I install mine and it leaks now do u need to add gakest sealer?

[@luiz6089]

I believe it needs a correct torque mate as per manual but he did with no torque ... weird

[@joshuaaguilar4905]

Dont add gasket sealer as it can get clogged in the filter. Clean all mating surfaces and torque to specs

[@luiz6089]

no torque?

[@hump210]

thought it was Nick Saban

[@jregamey]

This is easier to get at then on the odyssey. Ugh.

[@vityazsix]

mating surface.. freudian slip

[@TylorCollins2493]

Here’s a question for someone There are two solenoids almost identical to one another. The one he replaced and one right above it. What is the one right above it? What does it do? What’s it called? What’s it actuate? Thanks

[@lobstertantrum9511]

Part number: 28300-PX4-003 Lock up control solenoid