How To Change The Heating Element On A Hotpoint Or Indesit Tumble Dryer

Рет қаралды 32,001

Lords Electrical

Күн бұрын

Пікірлер: 54

@footballrobin123 12 күн бұрын

Great. Enabled me to breach my technophobia. Dryer now working fine.

@Robbie2318 Ай бұрын

Thank you, followed step by step, and I now have a hot tumble dryer again. 👍

@lords-electrical Ай бұрын

That's great to hear the video was helpful for you. Thanks for the feedback

@brjersey Жыл бұрын

More repair videos like this would be great.

@mabdub Жыл бұрын

All of these videos are very helpful. Fixing appliances and machines of every sort used to be commonplace but when people began getting too much money they started discarding broken appliances and buying new ones and a culture of waste replaced a culture of repairing broken things. Maybe soaring interest rates will shock people back to their senses. Knowing how to fix things never goes out of date. Hats off to this well informed technician.

@hotpointbrownlover3365 Жыл бұрын

love to see a tumble dryer bearing replacement video

@leonjupe7152 11 ай бұрын

Great video .. im about to do this .. i think mine is a slightly different model but your video was clear and easy to follow , thanks

@lords-electrical 11 ай бұрын

This will work for several of the models from Indesit / Hotpoint. Good luck with this!!

@stevethemudlarker 4 ай бұрын

ha brill thanks buddy. very good tutorial , ive just had to order a new heating element, everything wors on the dryer but the heat. the cost was less than 2o pounds hoping it saves me 100s . thanks great vid.

@iliachisacov7336 Жыл бұрын

Greatly appreciated video

@naypats 4 ай бұрын

Thanks! managed to change my hotpoint heating element thanks to your video.

@lords-electrical 4 ай бұрын

That's great to hear, i'm glad it has helped you out. Thank for the feedback 👍

@mrt8694 3 ай бұрын

Thought I was going to have buy new, followed your video works like a good one again thanks very much 👍

@lords-electrical 3 ай бұрын

That's great to hear that the video was useful for you, thanks for the great feedback 😁

@ksaleem785 5 ай бұрын

Weldone, I saved £200 . Thanks

@lords-electrical 5 ай бұрын

Great to hear this 👍

@GeoffreyHope 4 ай бұрын

Is that a large capacitor near the heater element cable connector? If so, will it be holding a charge that could harm you if touched?

@gillianmoon9025 9 ай бұрын

Thanks for the vid. My dryer is a hotpoint aquarius tvm570 it's getting warm just not hot. Could it be the thermostat or something different. Thanks

@lords-electrical 9 ай бұрын

If the heating element has gone then it wouldn't normally get warm at all

@lindseystevenson6876 Ай бұрын

Just changed the heating element it is the same make and model as the one shown but still not heating up. What could still be the problem?

@haneesabegum1300 9 ай бұрын

My new heating element didn’t come with the little plastic clip that goes into hold the wire in place and now I’m worried about it catching fire

@Dooomkiddo 11 ай бұрын

Can you hoover inside the tumble dryer to remove the lint or should you just brush/wipe it?

@lords-electrical 11 ай бұрын

You can vacuum it out that's no problem, and sometimes its easier to reach with a vacuum rather than trying to wipe it out.

@PhyllisGlassup2TheBrim 8 ай бұрын

If I want to remove the heating element completely, would removing it like shown, still allow the tumbling to work? I don't need my washing dried, I need it tumbled and the air sucked out to get the dog hairs off my clothes.

@lords-electrical 8 ай бұрын

Yes, in theory if you remove the heating element then it should still rotate and tumble but without trying it i wouldn't be 100% sure.

@stuartdean2518 2 ай бұрын

❤ very useful thanks

@lords-electrical 2 ай бұрын

No problem, glad the video was helpful for you, thanks for the feedback

@smudger304 7 ай бұрын

Just followed everything to a tee, very simple and easy to follow. However I now can see a small amount of smoke coming from the drum on the first attempt. Is this normal for a new heating element? Could it just be dust from where I’ve cleaned it out and loosened thing? Don’t know whether it is now safe to use??

@lords-electrical 7 ай бұрын

Really difficult to comment on this. They will have a small amount of dust on but it shouldn't really be smoking. Be very careful and don't leave unattended if you are not sure.

@smudger304 7 ай бұрын

@@lords-electrical thanks for the quick reply, have left to run for a bit and the smell and smoke have gone. It was more of a haze than full on smoke so could have been dust. All seems good now

@dianepotter4927 Ай бұрын

Help. Took all the screws out, but the element cover won't come off

@lauralee8988 Күн бұрын

Hey mate , Just followed this video yesterday and yay my heater now works but today it’s making a vibrating noise . Should so be worried? Just to add that some of the black seal from the back panel was broken and came off which I didn’t replace just in case that is the issue possibly . Can it blow up when replacing or would it cut out if there becomes an issue ?? There’s no smell and it’s working like a dream apart from noise and it’s never been cleaner lol

@lords-electrical Күн бұрын

That does sound odd that its making a vibrating noise. The black seal shouldn't really make that much of a difference but it could be if enough has been removed then it is causing a vibrating sound. It shouldn't blow up, but as long as the new element has been installed correctly then it should work and be fine

@nickblundell9990 5 ай бұрын

Just moved home and inherited a Hotpoint Aquarius. Works but doesn't get warm.Did the reset on the back but didn't work,saw a video saying change the pump,which i did,worked fir a day and now back to square 1. I guess this is the next step?

@lords-electrical 5 ай бұрын

Did you say you have changed the heating element? If not then this could be worth doing as in this video.

@nickblundell9990 5 ай бұрын

Did it yesterday,all good now thank you😊

@Rebla01 6 ай бұрын

spot on !

@hillppari Жыл бұрын

Heating element? what kind of ancient machine are you using. everything has been heatpumps for like 10years already

@razzlebazzle420 7 ай бұрын

Is this more efficient or more reliable? Or just cheaper?

@footballrobin123 12 күн бұрын

Thanks

@rosieblovsdogs 10 ай бұрын

Thank you!

@CodingBasically Ай бұрын

Changed mine but the back heats up soo much kinda scared it might burn the wall or somthing is this safe ?

@lords-electrical Ай бұрын

Its really difficult to comment about this, i would keep a really close eye on it and don't leave it unattended if you are worried about it.

@24327355 Жыл бұрын

Next, how to mend the Hadron Collider, with its subatomic composite particles, composed of Quarks held together by Force , the same way Atoms and Molecules are held by a Electromagnetic force, You May need a couple of days revision and a cheeky wee bunch of screwdrivers.......

@lords-electrical Жыл бұрын

I would need a large bunch of screwdrivers as its 27km long!! At least once its repaired i could get some Higgs Boson or Top Quark from it. 😃

@hotpointbrownlover3365 Жыл бұрын

this video will work for ariston dryers

@jakecornwell6916 11 ай бұрын

If its not heating 9 times out of ten its the cut out stat a lot cheaper than changing the heater

@marneyharris8090 7 ай бұрын

How can you tell if it is the cut out thermostat? Can you reset it or do you have to replace it?

@stuartcareless9550 6 ай бұрын

I have heat but my towel ls are wet any ideas ????

@lords-electrical 5 ай бұрын

If the washing is wet, then i would try spinning it in the washing machine for a bit longer to try and extract more water out of the clothes first. Its strange that its getting warm, but its not drying though?

@stuartcareless9550 5 ай бұрын

@lords-electrical Yes it is strange, It's like it could be lacking air flow. But I cannot find any information on it. I had a towel that was dryed on a washing line I stuck that in to see if the drying function would make the towel soft. It came out soaked ? This has what has made me look into it more. I removed the towel a whole load of heat comes out of the machine bit the towel is soaked ?