Best video on this task. Would just add a note that the oil level will initially drop as the oil filter fills up after restarting the engine, so check the dipstick thereafter to ensure the oil level is perfect. Thanks.
@CJCrossley3 жыл бұрын
Great walk through. I got a 2017 Jetta and have not done any work on it myself. This gives me the confidence to do so!
@SonsofSpeed3 жыл бұрын
Thanks, and we’re very glad you found the video useful!
@GPBlue-zl3sx9 ай бұрын
I own a 2016 model. Changing the battery is really easy. I want to do an oil change next.
@_lotion544 жыл бұрын
thanks for the video! my first oil change after getting my 2017 jetta is coming up soon and im gonna attempt to do it myself, perfect timing :)
@CJCrossley3 жыл бұрын
How’d it go?
@lazylearner9673 жыл бұрын
Just picked up a 2017 and will do the oil this weekend. Thanks you! Great Vid.
@SonsofSpeed3 жыл бұрын
Thank you!
@mattcheatwood60857 ай бұрын
This is overall a great video for someone who isn't familiar with oil changes. However, I did see one thing that was very concerning. You mentioned going finger tight and then one full turn beyond that. That is the best way to bend the threads that hold the oil filter on. I have seen it a dozen times over the years. Finger tight and then one quarter turn is all you need after you lubricate the seals. I have never had an oil filter leak doing it that way. I have done all my vehicles that way and have never had a problem and have done multiple other oil changes the same way for friends and family. Even going a half turn beyond finger tight can bend the threads and cause an oil leak. Just some personal experience.
@jarekgrenier68633 жыл бұрын
Personally I cut out a small part of the big plastic cover underneath the car so I can do oil changes without removing it. 95% of the cover is still there so, no big deal for dust and water.
@yiranjack3 жыл бұрын
Dude, you were taking off irrelevant screws off for this job, only 8 T25 screws off on the sides then you can take off the engine splash shield.
@tjlqk32 жыл бұрын
Right!
@tenfriskydingos11 ай бұрын
Yup just did this and can confirm only 8 needed to be removed
@charleshines57004 ай бұрын
Is that a manual transmission? I don't see the Volkswagen emblem on the automatics
@EsteBandido_YT3 жыл бұрын
Question! The manual for 2016 1.4L TSI mentions that either 5w-30 and 5w-40 are good for the engine. Which would would be more preferable in regards of durability and reliability for the engine? Also maybe for better fuel economy
@SonsofSpeed3 жыл бұрын
Generally speaking, the heavier the weight (the second number), the better it will do in hotter situations with a trade off of fuel economy. So if you're in a climate that doesn't get scorching hot, or you're not tracking the car and you'd like to maximize your fuel economy, go with the 5w-30.
@sandorfilep69043 жыл бұрын
In the case of CZCA, it is more 0w20 ?
@joejackson51742 жыл бұрын
I seen you push the 0.0set on the dash, but what did you push after that to reply on wether or not you wanted to reset...
@SonsofSpeed2 жыл бұрын
Just use the “OK” button on the steering wheel for that.
@EsteBandido_YT3 жыл бұрын
Wait. No link for some jacks? :( Aside from that, nice explanation!
@SonsofSpeed3 жыл бұрын
Thanks for pointing that out, we’ll have some up soon!
@johnk8153 жыл бұрын
Great video. Thanks
@SonsofSpeed3 жыл бұрын
Our pleasure, thank you!
@imsneeky4 жыл бұрын
i have the extremely rare 2017 golf tsi 1.8 engine of which no replacement oil filters were ever made,at least going by available ones near any store within 50 miles of me,it has a single use oil pan nut,which no one knows anything about at any store near me and a filter housing also made of plastic,which requires 1.000000045 nm of torque to retighten or it cracks
@AirAttack64 жыл бұрын
That suxx
@suepetrof79194 жыл бұрын
Are you the famous Art Vandelay of Vandelay Inds.?? LOL!
@EsteBandido_YT3 жыл бұрын
Try to get the part number from VW website, then go to ecstuning or give RockAuto a try
@abbasab_ov9060 Жыл бұрын
Only oil type vw 502 00 ?
@aleksandarilievski59984 жыл бұрын
Amazing job 👏 👌 👍
@SonsofSpeed4 жыл бұрын
Thank you!
@jbr88794 жыл бұрын
Please help ....i change oil from Peteol station...they don't change drain plug....what is your opinion
@SonsofSpeed4 жыл бұрын
Just so we understand, they reused the drain plug? If so, you should check for leaks often and check your oil level with each fillup. If you notice any leaks or low oil, have the oil changed again while changing the plug or at least the washer. Obviously, you’ll want to select a better mechanic for the next oil change.
@minnesnowtan99703 жыл бұрын
I find it difficult to read the dipstick, and have heard that a third party dipstick would be easier to read. If true, who makes a good dipstick for the 1.4?
@dallasdickinson83243 жыл бұрын
Is that a diesel model? Just asking because of the way it sounded when you were under the car while running
@SonsofSpeed3 жыл бұрын
No, it’s a gas model. A lot of these modern 4-cylinders sound a bit like diesels at idle.
@Cubanogar2 жыл бұрын
What would cause the oil filter to leak around the gasket?
@SonsofSpeed2 жыл бұрын
The biggest culprit is usually having an old oil gasket separate from the old filter and stay attached to the car, so make sure there’s not one stuck to the car when you change. Next would be failure to properly tighten the filter.
@MAchannel20244 жыл бұрын
Thanks for the video. the links for the oil plug and oil filter are not the correct ones for a 2017 Jetta SE. Amazon right away shows it is not the right part. Just an FYI..
@dalilamoh16013 жыл бұрын
How much torque for the oil filter please
@matthall2071 Жыл бұрын
I usually use the German phrase for that. “Gudentite” 😂
@husseymangtv4 жыл бұрын
Nice video! Is there any possibility i can do this with basic professional floor jacks? Or is it not worth the risk? Because these types of cars are pretty low
@SonsofSpeed4 жыл бұрын
Hussey we always recommend supporting the car on jack stands once you raise it with the jack. Jacks have been known to fail, and you don’t want to be under the car without anything else supporting it if that happens.
@husseymangtv4 жыл бұрын
@@SonsofSpeed okay cool thank you! So having a few good rated jack stands would give me enough room to do this job? First time car owner here so i have some basic questions lol
@SonsofSpeed4 жыл бұрын
Yes, that should give you enough room along with a creeper. Good luck!
@husseymangtv4 жыл бұрын
@@SonsofSpeed sweet then im excited for the future haha keep up the vids!
@dallasdickinson83243 жыл бұрын
There are car ramps called Rhino ramps, I don't go under a car using a jack anymore. Had a very close call, literally seconds after I got out from under the car the jack collapsed😬
@LA_Native3 жыл бұрын
Is the process very similar to a 2016-2018 VW Passat?
@SonsofSpeed3 жыл бұрын
We can’t say for sure as we’ve never worked on a Passat and that car wasn’t available with this engine.
@LA_Native3 жыл бұрын
@@SonsofSpeed thank you for the response and insightful video!
@EsteBandido_YT3 жыл бұрын
I believe starting 2017 is different from the 2016. At least the reset function from the dashboard
@manuelsalvatierra29404 жыл бұрын
So factory drain plug is longer than the replacement drain plug? That's the only difference and reason to replace the plug?
@SonsofSpeed4 жыл бұрын
Manuel Salvatierra yes, the original plug is longer, but VW’s replacement plug is shorter. If you can cut the washer from the original plug without damaging it, you could reuse that plug with the crush washers. VW does not recommend reusing the plug with the same washer.
@johnk8154 жыл бұрын
Why wouldn’t you just reuse the original plug? Because you want to change the crush washer and you can’t?
@dyepaintball4033 ай бұрын
thank you
@serowtravellog18412 ай бұрын
i just put a bit teflon on the bolt
@carterconfidential71104 жыл бұрын
Awesome video!
@SonsofSpeed4 жыл бұрын
Glad you liked it, thanks!
@edelsovaldes7282 жыл бұрын
Thank
@WillyD12 жыл бұрын
O ok I see now what motors that 1.4 I got the 1.8 and the filters on top cartridge filter don’t need to take the plastic piece off on mine
@AirAttack64 жыл бұрын
I only had to drop 4 screws per side, it then slides out
@patrickdejesus27984 жыл бұрын
Yeah, I have 8 in total.
@dougerd6842 жыл бұрын
It's great but only remove the eight screws 4 on each side no need for the front 6
@anthonypenna5961 Жыл бұрын
yes you are correct
@alexdiehl274 жыл бұрын
Where is ok for reset computer????????
@SonsofSpeed4 жыл бұрын
It's on the steering wheel.
@TheDuttonExperience2 жыл бұрын
I don't know why but it's bothering me that you're not using an impact or at least something with a lithium ion battery.
@SonsofSpeed2 жыл бұрын
We don’t know why either 😂 If you’d like to send us a new drill, we’d be happy to use it!
@user-rv3pc9hc8e Жыл бұрын
Remove used filter before make bolt
@user-vn6vx6rf7d2 жыл бұрын
5W40? Car calls for 0W20 - for 2019 anyway.
@SonsofSpeed2 жыл бұрын
This video is only for 2016-18 Jettas with the 1.4L engine. The 2019 Jetta was completely redesigned.