How to change your TOYOTA fuel filter (EASY WAY)

[@Oscar-pm9bx]

Pedal to the floor after having switched ingnition on and off multiple times to ensure you don't stall.

[@dan91sgarage]

Looks like you got lucky with the lower flare nut. Most of the time the threads jam and gall when trying to unscrew and reinstall. It took a lot of effort to undo mine and even using a brake pipe spanner the hex on the nut was not healthy afterwards! Also, the Starlet fuel pump doesnt prime with ignition on, it only runs when cranking. If you want to test for leaks by running the pump only you need to bridge 2 connectors in the diagnostic port then key on. 👍

[@starletnights1]

Thanks for the tips mate. Yes i think mine wasn't too bad because it was already changed once!

[@BrettSauve]

I want to add a pressure gauge to visually check it anytime

[@starletnights1]

I was planning to make a video on gauges install but things got sideways. Basically you need an oil filter relocator to be able to add a sandwich plate for the gauges' sensor as there won't be enough clearance otherwise.

[@BrettSauve]

Where did you get your air filter? I am in USA so it is hard to get Toyota Dealership to assist ordering OEM parts after providing part numbers. Thanks 😅

[@starletnights1]

I have got it from Repco here in Aus, I am sure your retail shops should be able to get you one, even if on special order.