How To Charge Gas/Refrigerant In A Refrigerator - R134A Freon

In this video, we have added refrigerant in a refrigerator to an r134a freon with a fast method. We have told you the complete standing and back pressures of the compressor while charging the refrigerant to your fridge. Also, we told you how to vacuum the refrigeration system before charging the gas to your freezer or fridge.
******************************************************************************
Products You Might Be Interested to Buy
Multimeters
NEOTECK Digital Multimeter ➡️ s.click.aliexpress.com/e/_Dml...
ANENG Q1 Digital Multimeter ➡️ s.click.aliexpress.com/e/_DeU...
Digital Pen Multimeter ➡️s.click.aliexpress.com/e/_DkM...
Rechargeable Smart Multimeter ➡️s.click.aliexpress.com/e/_DDm...
UNI-T UT181A True RMS Auto Range Multimeter ➡️ s.click.aliexpress.com/e/_DFL...
ANENG 616 Large Screen Digital Multimeter ➡️ s.click.aliexpress.com/e/_Dln...
TOOLTOP ET8135 True RMS Multimeter ➡️s.click.aliexpress.com/e/_DB8...
MASTECH MS8910 Digital Multimeter ➡️ s.click.aliexpress.com/e/_Ded...
ZOYI ZT-X Digital Multimeter ➡️ s.click.aliexpress.com/e/_Dd9...
ANENG Q1 Digital Multimeter 9999 Analog Tester ➡️ s.click.aliexpress.com/e/_DEz...
Thermal Camera
UNI-T UTI260B HD 256X192 Thermal Camera ➡️ s.click.aliexpress.com/e/_Deo...
TOOLTOP ET692Cl Thermal Imaging Camera ➡️ s.click.aliexpress.com/e/_Dm0...
Mileseey TR120E Infrared Thermal Imager ➡️ s.click.aliexpress.com/e/_Dej...
Fluke TiS55+ Thermal Camera 9HZ ➡️ s.click.aliexpress.com/e/_DCO...
Noyafa NF 522 523 Handheld Infrared Thermal ➡️ s.click.aliexpress.com/e/_DCe...
TOOLTOP T7 256*192 Android Thermal Imager ➡️ s.click.aliexpress.com/e/_DmB...
Soldering Wires
10Pcs 2mm XZZ-2015 Desoldering ➡️ s.click.aliexpress.com/e/_Dkg...
0.8mm/1.0mm 50g Lead Free Solder➡️ s.click.aliexpress.com/e/_DDn...
0.6/0.8mm 50g/100g Lead Free Solder➡️ s.click.aliexpress.com/e/_DDC...
200g 500g Tin Wire Soldering Wire ➡️ s.click.aliexpress.com/e/_DdQ...
8g 50g Per Roll High Purity Soldering Wire➡️ s.click.aliexpress.com/e/_DCm...
250m/roll 30AWG UL1423 Insulation Cable Copper➡️ s.click.aliexpress.com/e/_Deu...
Vacuum Pump
18V Lithium Battery Vacuum Pump ➡️ s.click.aliexpress.com/e/_DDK...
VEVOR 2.5CFM Refrigerant Vacuum Pump ➡️ s.click.aliexpress.com/e/_DkT...
Refrigerant Vacuum Pump ➡️ s.click.aliexpress.com/e/_DkH...
VEVOR 1.8-4.8CFM Refrigerant Vacuum Pump➡️ s.click.aliexpress.com/e/_DeA...
Mani Fold Gauge
Digital Manifolds Refrigerant Gauge ➡️ s.click.aliexpress.com/e/_DC3...
R410A R22 R134a R404A Manifold Gauge ➡️ s.click.aliexpress.com/e/_DeB...
Refrigerant pressure gauge ➡️ s.click.aliexpress.com/e/_Ddg...
500/800PSI Refrigerant Manometer ➡️ s.click.aliexpress.com/e/_Dne...
HONGSEN HS-330 Refrigeration Vacuum ➡️ s.click.aliexpress.com/e/_DBi...
Air Condition Gauge Manifold ➡️ s.click.aliexpress.com/e/_DFu...
MRCARTOOL L202 Air Conditioner ➡️ s.click.aliexpress.com/e/_Dkg...
Soldering stations
RF4-H2 Automatic Sleep SMD ➡️ s.click.aliexpress.com/e/_DBa...
JCD 2 in 1 Soldering Station LCD Digital Display➡️ s.click.aliexpress.com/e/_DFz...
GVDA New Soldering Station ➡️s.click.aliexpress.com/e/_DDc...
JCD 8586 Soldering Station 2 In 1 Digital➡️ s.click.aliexpress.com/e/_DBX...
SUGON T21 Soldering Station ➡️ s.click.aliexpress.com/e/_Dne...
AIFEN A5 Pro Soldering Station ➡️ s.click.aliexpress.com/e/_Dns...
JCD 750W 2 in 1 Soldering Station LCD Digital➡️ s.click.aliexpress.com/e/_Dl1...
UYUE T210 Soldering Station LED Digital➡️ s.click.aliexpress.com/e/_DeI...
Soldering Stations MECHANIC➡️ s.click.aliexpress.com/e/_DmW...
Desoldering pumps
LUXIANZI 30w/40w Powerful Electric Desoldering ➡️ s.click.aliexpress.com/e/_DkV...
Desoldering Pump Suction Tin Gun ➡️ s.click.aliexpress.com/e/_De1...
110V/220V Electric Tin Suction Sucker Pen ➡️ s.click.aliexpress.com/e/_Ddu...
Gaqqee 220v 36w Electric Solder ➡️ s.click.aliexpress.com/e/_Dkg...
******************************************************************************
Subscribe to The Channel 👉 bit.ly/3vNT7s3
Social Links
Facebook 👉 / forevertech3
Instagram 👉 / forever_tech1
Twitter 👉 / forevertech3
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for 'Fair Use'
for purposes such as criticism, comment, news reporting, teaching, scholarship, and research,
Fair use is a permitted by copyright statute that might otherwise be infringing,
Non-profit, educational or personal use tips the balance in favor of fair use
#refrigerator #gas #charging #fridge #134a #refrigerant #freon #refill

[@forevertechenglish]

Subscribe For more Content......🔥 Press That Red Button, KZbin has made it black now 😂😁

[@dannythebeerman]

What I like about this video is in 10 minutes so much practical instruction detail: 20 seconds to braze a pipe (to avoid carbon residue) , observing water steam vapor upon vacuuming ( before this I thought it was vaporing oil, but he pointed as time goes on the steam goes away), waiting a half hour to run if charged as a liquid, using touch and feel of piping for temperature difference and a practical explanation of over/under charge by feel, Amperage and freezer temperature check (ice cream keeps best at 0F). standing pressure and back pressure and not getting hung up on replacing Danfoss with a Panasonic. Great video, highly recommend, works for orifice air conditioning HVAC too. Repairers can use propane torch, staybrite 8 silver solder and matching flux instead of brazing.

[@Lex-ue1op]

Truely said...is sad in the dark...is light work that talks about the truth

[@fillo1971]

Buongiorno, sei veramente un frigorista un tecnico veramente capace e professionale. Complimenti. 💯👍🏻💪🏻

[@SamsungA-dz2oi]

Excellent demonstration , very clear to follow and understand,thanks a lot...

[@forevertechenglish]

Glad it was helpful!

[@lukamarovic5860]

I watched hundred videos and this is the first one to answer all of my questions. Thank you very much and keep up the good work !

[@forevertechenglish]

Glad it helped!

[@kareemhameed4042]

Nice video man Can you make similar one explaining condenser sizes, compressor sizes, and evaporator and fridge sizes in English like this? The one here on KZbin is Hindi and not everyone speaks it.

[@ddpd68275]

Thank you for sharing this kind of changing compressor and charging process..

[@forevertechenglish]

It's my pleasure

[@marekracko2364]

Very good explanation of detail proces :) Thumbs up !!

[@forevertechenglish]

Thanks a lot!

[@terrytinagero777]

Great job. Thank you

[@inochannel99]

thank you for the explanation it is very useful ...... like and share

[@riverbottomband]

Thanks for this. I am trying to learn how to vacuum and charge an Outdoor Ice Freezer.

[@forevertechenglish]

Any time!

[@peaceray3500]

i thought when the tank is upright vaper will come out from the valve ,not liquid while the vaper is always lighter and stay on the top of the tank, and when you are charging from the highside or liquid line you must use tank upside down to charge liquid

[@peniasnyirenda8095]

I like the touch u're using boss

[@abderazakbensmail7164]

very informative video. hope seeing more. greetings from Algeria.

[@kuyar.s]

Thank you for sharing this video, I am small KZbinr from Philippines keep it up the good work👍

[@forevertechenglish]

Dear No one Is Small, Its just the subscribers count that's it, Keep Growing

[@roypjohno8118]

Hai Good Afternoon Super Gas Charging Thanks 👌👌👌👌👌👍👍👍

[@raultorteleti2287]

Excellent video, but I would like to see who works with all that equipment.Ask how it would be to charge in gaseous form, the pressure with the refrigerator on would be 60 psi and when it is turned off the pressure would be 1 psi or depends on the size of the refrigerator.I have a Daewoo fr 400. THANK YOU FOR ALL THE INFORMATION

[@marioalbertojimenezsanjurj3183]

I am subscribing now. Really good video, but I am affraid that I need to check it again...I am into this. Thank you for sharing. Greetings from México.🇲🇽

[@forevertechenglish]

You should!

[@forevertechenglish]

And Thanks

[@vasiledolhescu2851]

Fantastic Explanation.You should teach to the new techs.

[@rickynaidoo2921]

I like to see more see more videos about filling gas in refrigerators.

[@forevertechenglish]

Ok great

[@fandf1449]

can you tell me what temperatures are looked at when checking the amount of gas at rest

[@navedsyed9354]

Missing one part in this video is Flushing lines by Nitrogen Gas and another chemical

[@rickynaidoo2921]

I need to learn this.

[@SamsulBahri-xf2tp]

Thanks

[@kerajinan.tangan]

Sukses selalu channel yang sangat bagus dan bermanfaat

[@forevertechenglish]

Terima kasih, sayang

[@ShahieryarBhatti]

ASalaam alaikum ustad ji

[@Intygra]

please i need clarifications: the manifold gauge used in this videos shows that at 100psi the saturated temperature is about 16degreeC. Which is contrary to the what's in the p-t chart for R134A. Also with this illustration what's the superheat. Fantastic video i must admit !

[@dannythebeerman]

I think you are reading the second line from center for r22, 100 psi approx 16C instead of the 3rd for r134 100psi about 19C.

[@jamesw4445]

Great video! So if the suction line frosts, I need to release some r134a out? Thank you.

[@doctorfeinstone6524]

I was always told it meant you needed to add some

[@mobidick6064]

Show how u bypass condensation pipes and bypass coil as well

[@rogerioreinaldonhatsave2134]

Good explication

[@SilvioTomazdeAquinoTomaz-sc2mi]

First one! Congratulacions.

[@forevertechenglish]

Thanks!

[@khalidmohammed1488]

Excellent explanation keep it so good.

[@jollyscaria1922]

Coppwr using norml pipe blow torch conneted ti the oxy -acetylene gas qelding equipment is used to heat the joint while brazing steel or coppwr pipe joint the same eqyipment can be used for used foe doingthe patch workof refrigerater ac deoep freezwr etc..hwat is priducwd by the burning of mixture of oxygen and acetylene using ..

[@jollyscaria1922]

Oxy acetyene gas welding copperpipe eakel jiunt selver brezing

[@jollyscaria1922]

Welding time metal sheet shaide holding and welding vrey nicelt wy reson s comprssar winding in susting hot runging time cottinng removeing and winding shorting come resons .. ac systion home applen systomes comrssars and poperly welding jone sotabls testing jonted all leckges mus be find outing fixed vacmes snd gas chargeing 134a .. jolly ..

[@aysegul2604]

Hello, I have a question: If I take a fully loaded 30 lb (13.6 kg) R134a cylinder, open the cylinder valve 3-4 times and leave it open without turning the cylinder upside down, how long will it take to release gas on average?

[@reneluboya8491]

thanks

[@user-xp7jw9bb8m]

how many capilary pressure normal sir ? how many High presure ? and how many low preesure ?

[@user-ph7dn6gi5g]

عمل رائع ❤❤

[@sawakibru4686]

Best tutorial,sir let me ask you aquestion? can some one repair fridge only through online learning.

[@forevertechenglish]

Well it depends on the person, how sharp he is in picking things. If you already have some technical knowledge, well then you are a person who can learn it. A person with no techincal knowledge might require physical learning of the concept. But if he is sharp enough to pick things. He will also learn it.Well it varies person to person

[@moommmoom]

I love your plug in table with amp meter and more, very creative. Does the similar exist to buy?

[@forevertechenglish]

I made it my self

[@moommmoom]

@@forevertechenglish I'm gonna build one , Any suggestions?

[@wawerukamau1260]

Big mistake. Danfoss refrigeration compressor uses internal thermo overload protection switch,while a Panasonic uses an external thermo overload protection switch. If you must use the danfoss PTC relay on a Panasonic compressor you must improvise a way of introducing an thermo overload switch between the power supply going to the common to the common terminal of the compressor.

[@forevertechenglish]

Yup you are right, I also realized it while editing the video.

[@samanthony4967]

Hello very good video but when R134a tank is up then it should be vapor not liquid? Just want to confirm. Thanks a lot

[@forevertechenglish]

It is mentioned on the tank that which side is vapor or liquid, and every manufacturers could make the cylinder differently and it is not important that the vapor or liquid comes out by keeping the cylinder up or upside down. You have to check it on the tank, which is vapor and which is liquid side

[@anselmjames1]

This is an excellent video, I was wondering, the board that you plugged the refrigerator into (with the amp meter), what's the name of it, and where can I get one?

[@forevertechenglish]

Dear The board i Plugged the refrigerator in I made it my self

[@anselmjames1]

@@forevertechenglish Thanks for you speedy reply

[@navedsyed9354]

@@anselmjames1 you can make also by buying amp meter ,Lot of shops in Pakistan are using this handed made board

[@DanielAbayateye-ly4mo]

Thanks you very much more videos

[@andresdelacruz604]

Good video thank you SC USA

[@forevertechenglish]

Very welcome

[@rodomachacavaleriano4636]

Excelent teacher

[@ethioadistube4704]

thanks very much this video is appreciate it

[@forevertechenglish]

Thanks

[@keehn20]

Lol that oil vapor

[@etcwarldbest3512]

Very good

[@OliveServis]

good work sir..! regards one profession..👍

[@forevertechenglish]

Thanks a lot

[@akhtarkh]

You cannot really tell from the standing pressure if the refrigerant is over or under charged because the gas is in saturated state, meaning both vapor and liquid exist in the system. You can have less vapor and more liquid and vice-versa but the pressure would be the same as per 134a temperature pressure chart.

[@yxcvmk]

Can you say how you actually could tell if it's over or undercharged?

[@Billy97ify]

@@yxcvmk The pressure while running is some indication and may be marked on the unit label. I am not an expert. Probably a poor indication. Feeling the pipe temperatures is is also some indication, as shown on the video.

[@roseanncloskey]

Excellent .1/21/2023

[@gudipallikarthik59]

Super bro

[@tturgutt27]

bu küçük buzdolabına 210 gr gaz çok fazla daha az olması gerekmezmi?????

[@wasimedoo7994]

Excellent video bro keep it up God bless

[@wasimedoo7994]

What size of compressor did you used you have any code you could give to me so I could know the difference I don't know about size of compressor thanks

[@inusahmohammed7075]

Sir please if Samsung frost free condenser is spoilt and replace it. When you fix a new one when you feel the fridge with gas and without the in side fan the evaporator will freeze to ice but when you fix the fan the evaporator will freeze half evaporator what should I do

[@raymondallenjhangiani7670]

👌 Excellent 👍

[@forevertechenglish]

Thank you! Cheers!

[@tbone6354]

A very helpful tip to extend the life of the compressor is to add 50ml of sulphuric acid to the compressor before regassing.

[@isewatr5610]

Bro fix your torch, but excellent instructions

[@forevertechenglish]

Thanks for the tip

[@forevertechenglish]

Whats wrong with the torch?

[@lamontg.9756]

If you could make more videos in English I'll like and subscribe every video. You're a great teacher and I love watching your videos. I'm a African American who respect and appreciate your knowledge that you share. Thank You!

[@jeanjacksongomis7168]

It vert importante good !!!!!!!!

[@umairshaikh3859]

Nice booss

[@darkopodbevsekster]

No good charging with liquid on suction side -valve ?😮

[@tesfaye9703]

tankyou my hearo but my quation is may washer over filling presure swich is ok also inlet wator valve is ok but the wator not stop and the washer not starting canyou help me???

[@forevertechenglish]

Check whether the air trap is blocked. IF yes then it could be the reason.

[@CarlosNavarro-ym6qz]

What is the model number of that gauge

[@nazrulkhan-ic6yt]

NICE VIDEO

[@forevertechenglish]

Thanks

[@PavelMarchev]

Please explain to me what means "the system is chalked"? Мy translator translated it as a writing item on a board.

[@forevertechenglish]

Its Chocked, not chalked.

[@prenerjean9434]

Is true 👍!

[@forevertechenglish]

Thanks dear

[@jollyscaria1922]

Very good

[@ffggxfhhvgffhgdtygxyggeyhgfhfg]

How did you make that valve on the end

[@forevertechenglish]

Which Valve

[@TheKiltedHam]

To make sure the evac was done properly you need a vacuum gauge. You also need to do a pressure test with nitrogen. This compressor replacment was not done correctly

[@forevertechenglish]

Yeah You are Right I needed a Vacuum gauge to make sure ( But After 30 years of experience I know the vacuum I did is good or not ) and I already did the nitrogen test before filming this video.

[@TheKiltedHam]

@@forevertechenglishI said the same thing and I use to do it the same way. I learned my lesson

[@Freonleon]

@@TheKiltedHam coming from the guy that says you can’t freeze the valves on the compressor. And idc how long you done this you will never tell with out the gauge that a vacuum is complete. Bunch of hacks

[@TheKiltedHam]

@@Freonleon I said you need a gauge to tell if an evac is complete. You can charge a unit through the suction side without freezing the valves if you do it correctly

[@rhemamachaira8763]

Lol. What does -30 on the suction gauge indicate. Only way we had in the military.

[@irham9856]

👍👍👍

[@aw7612]

Lmao burning water that's a new one

[@vincentsale551]

Hi, I dont understand how you can say the vapour from the vacuum pump is water,

[@forevertechenglish]

because the water went inside the pipes of the refrigerat lines.

[@vincentsale551]

Ok, I never experianced that. Must have been a lot of water in the system. When I vacuum I get oil vapour breathing out of the vacuum pump.

[@forevertechenglish]

This was the same with water. I have A video on its compressor as well. And I tried to filter its water, If you are interested, do watch that as well.Vdo Link: kzbin.info/www/bejne/aHLGaaRuh66lY9U

[@robertperladatv4202]

wow

[@cooltechsolutions9980]

Gud job

[@nduggaabdunasief1753]

❤

[@alphaomega7498]

That's brazing not welding but good video overall

[@Lupgaroo666]

As welding is defined...it brazing is a form of welding technically. But yes...in layman's terms it is considered brazing. Also the water and air rae not burning,...but it is considered burned off. I agree...It is a good video.

[@alphaomega7498]

@@Lupgaroo666 sorry but brazing is not welding sir. Welding is when you join two or more metals by melting the base metals and brazing is actually consider a form of soldering as its not melting the base material. It's joining the metals by filling the space in between the metals with a filler and does not melt the the base materials.

[@fortuneone6632]

It's a welding torch.

[@SUHRING_Fire-free-connection]

来自中国的制冷无火连接技术为您点赞👍👍

[@NordenEngineering]

How do you seal the charge line

[@dannythebeerman]

he is charging through a schrader valve ( which seals) where the hose connects

[@jutonudolea6768]

How can I get the mechance

[@forevertechenglish]

The Vaccum Machine?

[@user-ty4nw9rw4c]

😊

[@HDXFH]

Gotta love those watermelon compressors

[@omar_rayed]

و أنا أيضاً 😂

[@taso2988]

Excellent video Thanks

[@forevertechenglish]

Glad you enjoyed it

[@othmansalum8123]

Good I'm student of refrigeration . You can help me?

[@forevertechenglish]

How can I help you?

[@othmansalum8123]

How to know size of compressor

[@makadodongtunnel9002]

Please do ctto

[@user-fl4km9ne8e]

我一直担心压缩机会爆炸~~~所以没去尝试玩儿这个~

[@forevertechenglish]

是的，你做对了，除非你有这方面的专业知识或了解它，否则不要做任何事情。

[@pierremathurintoyayisamand351]

J,ai bcq aimer

[@forevertechenglish]

merci cher ennemi votre retour précieux

[@edwardphaladi8497]

U say ur charging in liquid form but gas's bottle is upright? Supposed to be upside down

[@forevertechenglish]

This cylinder has been manufactured this way that the liquid will be charged in upside, and the vapor will be charged upside down

[@joeyjennings9548]

made in italy.. 🍕 pizza flavored line driers lol

[@forevertechenglish]

Hahah That's Funny

[@emptech]

after the first 10 seconds, I had enough. "I'm going to be welding..." If the tech doesn't know the difference between welding, brazing, and soldering, has no business doing this work. Or was it the computer voice's fault?

[@forevertechenglish]

Dear it was a mistake while editing the video, my editior got it wrong. Anyhow I know the differences between brazing, soldering & welding.

[@qwzxhskexn9467]

hhhhhhh

[@suiseidel1]

I bet this guy clogs a lot of lines with solder with those huge gaps and ill fitting lines! He should take a pair of dykes and pinch the line to fit tight before welding. Also what is going on with the 3 foot long process stub?

[@forevertechenglish]

Dear Brother Never Happened I never Clog Pipes while Welding them

[@Ruata_Hmar]

You refill the gas about 210g. Its a lot of gas!

[@forevertechenglish]

it was the companies recommendation

[@IqbalKhan-hc1hv]

Repeated invitation to subscribe is annoying

[@reussisavienestduhasard2571]

#frigoristesteve

[@95Dap8]

It is illegal for anyone who is NOT license holder for this work.

[@forevertechenglish]

I have been in the field for almost 26 years... But Yes Illegal for the one who has no expertise in the field.

[@dannythebeerman]

illegal for unlicensed to accept money for services, legal to use recovered refrigerants from your own stuff. legal to buy regulated refrigerants to be installed by a epa licensed technician. I think it still legal to install r134a, but illegal to excessively vent other regulated refrigerants (legal to vent propane and isobutane) (but no one is complaining about greenhouse gases from r410 released from russia and israel bombing of civilian targets). Get yourself a refrigerant recovery machine and tank your not going to jail or likely fined excessively for trying to do it right.

[@user-tr3sw3mi4y]

Me i have double door hisense

[@forevertechenglish]

ok

[@vinces.2862]

Very good video. Video only, the ridiculous computer voice annoyed the hell out of me. Turned off the audio and used closed caption. Next time VOICE it YOURSELF it makes it more personal to the viewer.

[@patrickp588]

Bro is using massive heat

[@JS50108]

You have copied this video from somewhere 😮😮Hiding the logos of the original video 😅😅

[@forevertechenglish]

Dear This video is our own, we have two channels names forever tech and forever tech english, We just translated our forever tech video to english and uploading on this channel. For the purpose to entertain english Audience

[@forevertechenglish]

And thanks For raising this question I hope All your Doubts are clear now.

[@tturgutt27]

Shouldn't 210 g of gas be much less for this small refrigerator?

[@compliancenoahpnoah6358]

0