How to Clean and Maintain - SHARK DuoClean Floor Nozzles - Soft Roller Brush

[@germainewalsh2192]

I reiterate what everyone else above says. Couldn't vacume the house for weeks as my Shark Duo Clean had stopped working. Bogging! Followed your video and a huge amount of compressed gunk came out and voila, it rolls. Youre amazing thanks!

[@MarkWorthen]

Very helpful! You show something important that Shark neglects to tell customers. The Shark Performance Lift-Away Upright Vacuum ZU700 Series Owner's Guide (2020) neither shows (in the illustration) nor tells customers (under "Cleaning the Soft Roller") that you must open the "brushroll garage" before trying to reinsert the soft roller. This is important to know if the softroll pops out and you try to put it back in.

[@floratollis6591]

Great vacuum cleaners!!! I had mine for 4 years and it's still going good I didn't know how to clean or where the buttons were to pull the rollers out my husband passed away not even a year ago and I am so lost without him he was the one that took care of all this stuf... I was going to go get me a new vacuum thank goodness listening watching your video really helped me out thank you so much!

[@dailaanshaffer7090]

Thank you! My front roller fell out and watching this made me realize the bed it lies in is supposed to be free and clear of any fibre. I cleaned that out and was able to snap the roller back in easily. I'm so glad I found this video.

[@VacuumWars]

Glad it helped!

[@manonfire4jc]

Hi. My shark duo clean power lift does not have the push tabs to remove the clear plastic cover to get to the fins brush. Can you help me with how to get to this? Cheers and thank you.

[@Pink1065]

Thank you soooooo much for this video. I just spent 20 very frustrating minutes trying to figure out how to put the brush roller back on my new Shark Duo. It had popped off while vacuuming. I LOVE this vacuum and was hoping I hadn't broken it already. I watched your video and popped it back on in 3 seconds!!! Thank you thank you thank you!

[@tmf9556]

Watching on a Friday night. Man. what happened to me lol

[@nick4k539]

Lol me too

[@PuppupsMomma]

This is my Sunday!🤦🏼‍♀️

[@frankiesoliz3260]

12/4/20 I definitely agree with you 🤣

[@timhenley3602]

Dude, I'm here on a Saturday night not sayi g much about me, either.

[@traviss6564]

Lol! So me. 🤣

[@mommyfowler2527]

How do you take the hard brush roller off to clean ? I can’t figure it out nor can I find a website to help me.

[@peggynunez391]

I was hoping to find the same info.

[@mikeholland4471]

How ?? Please help

[@meghanjohnson1175]

You need a set of security driver bits! They have torque shaped screws with a pin in the middle because they don't want you to be able to clean them yourself

[@someguy9519]

I've got the ninja and NEVER AGAIN

[@A_Bunch_of_Savages]

Shark = disposable vacuum.

[@stevenmiller939]

Excellent video, saved me from throwing the vacuum away. It is great to have informative instructional videos at our fingertips!

[@brendawilkerson3343]

Thank you. I was struggling trying to get it apart. All clean now Thanks to you.

[@VacuumWars]

Excellent!

[@shaunmcclearn6409]

I never knew you could pop the front off lol saved me a lot of hassle thank you

[@VacuumWars]

That is great to hear! Thanks!

[@L_M_C]

Thank you for this simple, instructional video. Within 10 seconds I was able to fix my vacuum, all thanks to you!

[@VacuumWars]

Glad it helped!

[@Viewer765]

@@VacuumWars which vacuum manufacturer is best for repairs and getting parts.

[@PixieDark99]

Can you do a video for the shark duo with power fins I can’t figure it out and my kids ran over some cat pee. Now every time we vacuum it stinks 🤢

[@oldcrankman6164]

Can you take the bristle brush out by taking off the cover, or do you need a new power nozzle?

[@lockdown123456789]

Is there an updated video on how to clean under the hard rollers?

[@rychei5393]

Not sure why you didn't show how to remove the large rollers too.

[@donnabradley6156]

Rated Are 1

[@clissolds]

the large roller does not come out.... ever. this vacuum is just a piece of crap

[@PureNrGG]

Hey! Great guide! Im gonna take a shot in the dark here lol... I'm hoping you might know about these vacuums. I've got a hand me down and the part that swivels is broken. Do you know if you can find replacement parts for it? I can send pictures if that makes it more understandable. I'm a handy dude so I have it all taken apart, it's just difficult finding parts haha. Thank you in advance!

[@jeanineanselmo9612]

Quick. To the point. Very informative 😀. And here I was all ready to break out the tools! Thanks sooo much!

[@feet9486]

So clear and easy to follow. Thank you! Big help.

[@maxieestrada3179]

I have the one with no release . How do you clean that roller

[@taigaforest..]

The roller is removable but what about the larger roll brush in the back can I remove it to clean it??????

[@kakapo1009]

Thank you for this video, it helped me to remove a blockage 😊

[@lindareiter526]

how do you remove the motorized head. i want to order another one but if i cant detach it from the vacuum i cant

[@annettea.penney3161]

Excellent demonstration! I have the Shark ZU700C DuoClean - I took it apart to clean it and there's a part I don't know where it goes. Looks something like a black pony tail holder. It's not a rubber washer. Do you have any idea what this is and where it goes? :)

[@johnruthven3619]

I have one with no brush plate remival catches on the top - only three plastic slotted bold heads under - so not sure how to take out brush (Model IZ300UKT - duoclean powerfins

[@toothpastemonkey]

Question: Can I use a mild dish soap to clean all of the parts? For example, the brush roll, dust bin, filters, etc.? I saw that Shark recommends you to just use water, but I don’t understand why. Thanks in advance!

[@jupiter.6268]

Fyi. Soap attracts dirt..

[@LibertyMom88]

I can't find any information on how to remove the floor attachment from the vacuum to even start this process.

[@2fluffy_puppies]

can you show me how to clean the shark liftaway ,nozzles & all thnkU

[@scottdavis7743]

Any videos on how to replace the belt in the cleaner head?

[@docampo914]

Ok same. Mine stopped working at rhe bottom won't spin

[@JV-xs2li]

THANK YOU SO MUCH!!!

[@VacuumWars]

You're welcome!

[@sherrieaugusta3160]

I love my vacuum but the rotator bar has no bristles left on it. I ordered one from Amazon but it was the wrong one where can I get one?

[@jake30966]

The brush on mine doesn't turn how do I get inside it for a look

[@terrivejvoda7442]

Great video ! love the duo clean. thank you!

[@VacuumWars]

You are so welcome!

[@charlesholliday1013]

Thank you. Just what I needed!

[@VacuumWars]

Glad it helped!

[@pjoyce4706]

Thanks for your help ☺️

[@VacuumWars]

Happy to help!

[@hurkamur1]

Got the ionflex duoclean and it's an absolute nightmare to clean the roller brush and side wheels. The unit doesn't come apart. It's almost not worth it.

[@jenniferforrest7041]

This helped me so much!!!!! Thank you!!!!

[@VacuumWars]

I'm so glad!

[@johnswanson9654]

I have the shark duo clean powerfins and can’t find an eject button for the brush roller. Only for the soft one

[@luv2luv720]

Thank you very much!!!

[@VacuumWars]

You're welcome!

[@MrGoodyear1970]

I use a dryer sheet on the soft brush, comes up super clean, gets dirty less often

[@VacuumWars]

Good to know! thanks!

[@ermaspencer2258]

Why didn't you do the 3rd example? It is like mime. I cannot get the orange roller in place. It has a small 'trip' handle on the metal end and however I position it, I cannot get the roller cover back on.

[@mdllight6223]

Thanks! Helped alot

[@VacuumWars]

Glad to hear!

[@loveyouworld1]

hi i have NV702UK model. no push buttons to remove the top cover. I did remove the black n orange strip roller and washed it. but how can I remove that main brush roller.. want to replace that main brush. please guide me. thank you

[@tomalba7]

I have the duo. The one you are doing towards the end. My red roller is not spinning only the big brush. This thing is almost new it's probably something simple what should I do

[@EatHorses]

I have a similar model with the same problem. Did you find a solution?

[@vickiobannnion8768]

Thank you

[@VacuumWars]

Welcome!

[@robertgibson2193]

Love how you didnt show how to sort the end one the one u acutally cant take apart

[@ericastanton458]

My duo clean doesn’t have a button release for the main roller - how do I get it open

[@tiranies8477]

I can’t find how to take off the clear part of my vacuum. I don’t think my model type was covered.

[@andreah6175]

Supurb examples covering all the bases : )

[@VacuumWars]

Thanks so much!

[@Ravenfellblade]

I need to know how to remove the main beater. My mother in law's dog peed on my floor, and now the entire head unit reeks of dog urine. I got the smell out of the soft roller, but I can't get at the back while that is covered in dog urine grime. Any help?

[@exwhyz33]

Thanks. Can the brush be removed?

[@Carleo15876]

I have the shark if250uk and the little cross bit thats attached to the drive spindle that locks into the soft roller has broken off, i cannot find this small part anywhere online to buy, i really don’t wanna pay £69.99 for the whole floor nozzle part, anyone know where if i can get this part anywhere?

[@Emily-cv9mf]

??? My duo clean doesn’t have any clickers to take the top off it to access its inside brush roll bit 😩

[@CSmithyPx]

Same you found out anyway to clean it

[@Emily-cv9mf]

@@CSmithyPx nope still broken

[@FosterStrongman]

So my belt went out on my zu561/zu562 just the standard shark zero M without duo clean. It's looking like I'll need to purchase a whole new motorized cleaner head as they dont sell replacement belts, can you confirm? Appreciate the help!

[@streetspirit956]

ive cleaned it, there is no hair or debris and its still getting stuck. Any suggestions?

[@ynlowry2704]

Very helpful. Thorough explanation and I was able to follow along and clean out and reassemble. Thank you!

[@cali7150]

My shark duo clean machine sounds different. Louder and it seems that the motor is working hard. I clean it after every use, I love my machine and don't know what to do can you help me??

[@shadowpapito]

Thank you ...

[@rdance3]

What if it's clean as can be, but there is a grinding sound, like stripped gears?

[@JB-nx9tp]

You the man!!

[@janevanskike2101]

I have 2 shark vacuums. They are wonderful.

[@jafallica]

I have an upright Shark Duoclean and the brush roll fell off. Now I can’t get the darn thing on!

[@Svendrys]

How to remove and clean second roller?

[@dalewinchester7236]

How about replacing the main brush roll how-do-you-do that you do that do they even sell a main brush roll for that would be nice

[@jmedi5589]

Everybody talks about that front roller. No one talks about the roller in the back. Does anyone know how to remove it?

[@sarahh2072]

How did you get that head part off???

[@INSATIABLE718]

My mom Duo Clea NV200Q rollers are cleaned out. Now it’s spitting out whatever is be sucked up. Help!!!

[@2laydbackg708]

How about if I don’t have buttons in the from to access the back roller! Smh

[@andyprodive24]

O change bristle roller onduo clean module

[@rond3295]

Not even 2 weeks old of owning the vacuum. I have the ion flex duo clean cordless, the roller stopped spinning and it looks like the “pin” as you called it or nut broke into pieces. I called shark for a replacement pin but they wanted to sell me a brand new floor nozzle set as it only comes with the set for 80.00. Now I searched online and went to hardware stores and found no luck. Do you have any idea what that pin/nut is called?

[@tomeckhardt8700]

This just happened to me today. I'm going to call Shark first and if they don't want to fix it, im going to pay someone with a 3D printer to make me a new one

[@leiatamasaniai4863]

What's the name of the little piece that keeps the soft brushroll in? Mine broke & can't seem to find it due to not knowing the name of the piece.

[@lee-dg6io]

Did you ever find out the name of this part? Same thing has happened to mine!

[@pringle584]

Same here!

[@gloriahawryluk6759]

@@pringle584 same here, obviously bad part as it's plastic!

[@vinchenzo626]

Is there a way to replace the hose to the floor nozzle?? I have a shark rocket duo clean model hv380w and that hose broke open and I need to replace it. Any ideas on how?

[@tungstenwhizard4361]

This is a little late. Try the Sharkclean.com website. They sell hoses for nearly (idk about every) Shark. Is this the one you need? Hose or wand? Hose: www.sharkclean.com/parts/0/all/1724/flexible-hose/ Wand: www.sharkclean.com/parts/0/all/1718/extension-wand/

[@ironwood9]

My vacuum has something stuck in it, I can't get it out....

[@nickyboehlen6836]

I vacuumed some fish line up by mistake the rollers don't roll anymore

[@remb9614]

Would you ever need to replace the soft brush?

[@LillyLavine]

I've had my shark duo cleaning P50 for almost 2 years and just had the replace the soft roller

[@remb9614]

@@LillyLavine Do they wear out or wear down?

[@LillyLavine]

@@remb9614 well neither I guess. I washed mine too frequently and it got so fluffy it wouldn't spin because it was getting caught.

[@remb9614]

LillyLavine oh ok. Thanks

[@bigmike1719]

Well mine has no top access to get the roller out :/

[@travismoreland7268]

Check the sides

[@jeffrme]

Your video shows three heads but you only talk about two. And of course it was the one I have, so not very helpful!

[@amethyst_moonchild]

You didn't show the other vacuum, the one without the quick release roller!!

[@jeremiahbower2502]

This doesn’t include my model😢

[@snoopysrc]

I am very happy with my two shark rocket one zero m apex and self cleaning as well as my rocket today I got one free for a gift am I happy

[@jimmy2minutes]

Not one video of how to remove the main roller. That's all anyone cares about.

[@christinamartinez8132]

These ads are ridiculous.

[@DougHanson2769]

It literally takes more time to clean the vacuum then to vacuum the whole house. Jesus Christ

[@JoseRodriguez-ki5pj]

How to remove the rollers not how to clean Click bait

[@travismoreland7268]

just use hot water and soap let air dry :)

[@Keweesam]

Hopeless video u showed two outta three 🤦‍♀️