How to clean and service your FELCO 2 pruning shears

What you'll need:
- FELCO 905 multifunctional sharpener
- A dry rag
- Scotch-Brite
- FELCO 990 grease
- Adjustement key 2/30
- Lubricating oil (sewing machine oil)
- FELCO 980 protective spray
Instructions:
1- Disassemble your tool
2- Clean all parts with a dry rag
3- Scrub each part carefully with scotch brite
4- Add some FELCO 990 grease on the blade and counter blade
5- Reassemble your tool
6- Adjust your tool
7- Add some lubricating oil on the spring
8- Sharpen your tool:
The FELCO 905 will allow you to maintain the sharpening angle of the blade on both sides.
9-Spray FELCO 980 on to your tool

[@chemteacher70]

Loved the video and love your pruners but could you identify the oil used on the spring? Thanks!

[@luticpagan3549]

а зачем второе карбидное полотно в 905? и зачем пырскали дезодорантом?

[@nancimoll9901]

This was the best video ever! Feel very confident now. Music isn’t that bad and if you are like the other commenter, then mute it.

[@pamelah6431]

Thanks for the visual. The "music" is terrible, though. 😂

[@martinfernandes4941]

Hi, Please help me on how can I order your Falco Tools in India.

[@carolyncoppola974]

I have been trying to sharpen my Fiskars and nothing is small enough to get in the narrow part of the blade and I cannot find any instructions on how to disassemble it. You just sold me on Felco 2 pruners! Thank you so much!

[@pamelah6431]

Fiskars & Felcos are a mile apart. You're much better off with the #2 Felco. I've had the same pair on my hip for 5 years and it's never let me down. :)

[@luticpagan3549]

ну и нахера смазка под лезвие с той стороный где нет соприкосновения? дороговаты тряпочки для протирки то

[@pamelah6431]

Use a shop towel, then... Also, the oil helps keep rust off, not just lubricate.