How to clean clogged or blocked Epson print head nozzles the easy way.

An easy to follow guide to unblock an Epson Printer.
**Buy Your Printer Refresh Kit Here**
bit.ly/2uCDzrU
**Buy the XL Size Printer Refresh Kit Here** bit.ly/2mpVCw4
**Buy the Super Size Printer Refresh Kit Here**
bit.ly/2LsqpD4
**Do you need a new printer? Please follow the link below.**
amzn.to/2Txpk1Q
**How Did we record this video ?**
To buy very affordable equipment find it here
amzn.to/31HTVwe
We sell cartridges for Epson printers that will not block your printer. Cheap yet very reliable!
Please visit - www.118ink.com...
PLEASE REMEMBER TO SUBSCRIBE 😀
Music Used Under License from Premiumbeat.com
Joining The Dots - Ben Beiny

[@paulina1044]

This did it! Thank You...

[@Theinkrefillexperts]

That’s great 😀

[@Sherry78]

where did you buy the fluid?

[@Theinkrefillexperts]

118ink.com

[@BeverlyHoward]

"Unplug the Power Cord While Printing to Unlock the Cartridge Cart" Brilliant! Great example of thinking outside the box... literally! Thanks for that and the additional info in the video!

[@Theinkrefillexperts]

Hello , did it work for you ? 😀

[@ValerianSantosa]

the safer method is to locate the cartridge lock (usually white in colour) and push it.

[@TheFakeyCakeMaker]

Think I'll do this on my printer, just want to say that not only was the video helpful but I appreciate seeing how you answer everyone who asks a question clearly and politely, small things like that build perception and let people know that they can trust your advice and products. Thank you and keep up the good work.

[@Theinkrefillexperts]

Thanks very much for the kind message. Would you please subscribe to my channel 😀

[@jodyann77]

@@Theinkrefillexperts still watching in 2021 😁 awesome video! Thank you hun

[@jcc6664]

I was so close to scrapping my Epson scanner/ printer as the head clean process wasn't working. I have only recently learned the heads can be cleaned like this. All makes sense now. Good tutorial. Thank you.

[@Theinkrefillexperts]

Hello John, you are very welcome.

[@74Voyeur]

Thank you VERY MUCH for the BRILLIANT tip of cutting the power when the print head is out of its resting position! I followed your advice, and was able to clean the ink pad underneath, and the adjacent areas.

[@Theinkrefillexperts]

That’s great 🤩

[@nevetsrellim]

After many months of not being able to print blue on my Epson printer even after many cleaning cycles, I watched this video and I was able to easily clean the print head and now I can print blue again! Thanks for the tips I learned here.

[@Theinkrefillexperts]

Steven Miller you are very welcome. !! Thanks for the feedback. Can I ask which printer you have ?

[@nevetsrellim]

I have the WF-3620 that I figured was ruined. I was using a backup printer but now I have two workable printers. I do refill my own inks in refillable cartridges which I've been doing for years without any problem. Thanks again!

[@Theinkrefillexperts]

Steven Miller no problem at all

[@seagreenman1]

Just done this to my WF-2750 and it worked a treat. Had to do three passes of the print-head cleaning routine before it came totally clear. Many thanks!

[@Theinkrefillexperts]

You are very welcome 😀

[@karenappleby8805]

So pleased, I thought I needed to buy a new printer but this has sorted it out completely. Highly recommended

[@Theinkrefillexperts]

Thanks very much 😀

[@itsbam2376]

I had a totally blocked black print head, not 1 speck of ink was getting thru. I had my doubts about this working but after 3 flushes its working like new again. I still have enough fluid left to do this another 10 times at least. Amazing stuff.

[@Theinkrefillexperts]

Thanks very much 😀

[@johnlong9494]

@@Theinkrefillexperts I was able to flush and am still able to get a little color to easily flush out (not muddy and thick like before though, whew!), however now that I want to print, the printer goes through all the motions, but does not print anything except yellow. The cartridges are new and a little could be printed from each prior to flush and head cleaning, but now the paper receives NO ink from any cartridge except yellow. Epson XP-420 Thoughts? Thank you!

[@Theinkrefillexperts]

I would try sucking upwards with the syringe on each ink line. There is air mostly likely are also blocking the lines. Then run at least two head cleans to help the ink back into the ink lines. I hope this helps. Thank you

[@johnlong9494]

@@Theinkrefillexperts will do, thanks! :)

[@Theinkrefillexperts]

Yes it does 😀

[@micahrunion4949]

I followed this tutorial and it really did fix my printer head. I used warmed up Mrs. Meyers instead of this solution and a syringe with the hole extended from a screw driver. Thank you so much I was almost in tears because I was so frustrated with my printer.

[@biggonnaturalbeauty8114]

Hi, so you didn’t have the hose you only used a syringe? What was the screw driver for.. I’m about to lose my mind.. I want to fix my printer so bad

[@Theinkrefillexperts]

That’s a terrible idea and won’t work

[@Theinkrefillexperts]

The fluid will go everywhere and if you have resistance it will squirt everywhere.

[@GiovanaSimmer]

@@Theinkrefillexperts Considering his sentence is in past tense, he already did this, and it already worked.

[@Theinkrefillexperts]

I don’t believe 😊 The fact he says he used a screwdriver to extend the hole is impossible. The line are designed to be that exact size.

[@bogachev11]

Amazing! Spent few month to clean red head with no success, and after minutes of that method - it finally works!

[@Theinkrefillexperts]

Thank you 😀

[@ellietolley1960]

After having my Epson Stylus SX610FW for over 4 years the printer just suddenly decided to not print properly and just thought this was because the printer was old. I was sceptical that this product would work but decided to try it before I bought a new printer. I can't believe how well this has worked! I cleaned every head with the product and I've never seen better results. It's like the printer is brand new! Fast delivery and easy to follow instructions! Thank you!

[@Theinkrefillexperts]

That’s very kind ! Thank you.

[@Theinkrefillexperts]

Would you please leave me a good review on google ? g.co/kgs/SWY3zN

[@robertgoode6]

I ordered cleaner from Epson that is specifically for my WF-7510. I don't know if this is any better than Printer Refresh. The instructions that came with the cleaner called for disassembling the printer head which is very difficult particularly since the directions did not match what I found in my printer. So I followed these You-Tube instructions which require no disassembly other than removing the cartridges. And they worked. Tip: Be sure to use different blotting strips for each nozzle cleaned. 4 nozzles four strips. Be careful removing the strips as they get messy. Excellent video.

[@Theinkrefillexperts]

Thank you very much 😀

[@Magirl57]

So glad I saved this very helpful video, I have used it once a year on my Epson printer and it works every time! Thank you.

[@Theinkrefillexperts]

That’s brilliant, great to hear of another success story.

[@tedwina25]

Such a helpful video. Got the kit, followed the instructions to the letter (flushed out one cartridge several times and the others once,) and hey presto! my printer prints like new. The replacement printer that is sitting in the hall after hubby went ahead and bought a new one without giving me the chance to try clearing the old one, is now going back, saving us over £70. thankyou so much.

[@Theinkrefillexperts]

Thanks for the very kind comment 😀

[@abiherron-newell2321]

Saw this video and bought your printer head cleaning set. It's brilliant - thank you. I thought I was going to have to get a new printer as head cleaning alone just not working. Cleaned it just once and now works perfectly. Thank you very much.

[@Theinkrefillexperts]

Thank you very much 😀

[@avauinc]

Thank you! I followed you direction how to clean nozzles on my epson printer today. I was very careful, didn't want to mass up anything; even though I spilled a little bit of liquid when I pulled up the cleaning tube from the first nozzle head, but I dried it up as much as I could. I ran clean heads 4 times, and wallah my printer sang:) I first tried on printing out my husband's driving trip direction to Yuma Arizona next week, and it printed out perfectly. I was so happy and on cloud nine, took the print out to my husband and said "honey I did it" and gave him his trip printout! Thanks to you and your video. Much love and light from a happy Retired Marine's wife in Vegas,lol!

[@Theinkrefillexperts]

You are so welcome ! I hope your husbands trip is a success 😀

[@avauinc]

@@Theinkrefillexperts I'll tell him, thank you again.

[@Theinkrefillexperts]

You are very welcome 😀

[@stephenclayton666]

Received the kit today, was a bit dubious as blue ink has not worked on my Epson SX515W printer for 2 months no matter what I tried. One flush with this stuff and 2x head cleans and the printout looks as good as it ever did. I'm impressed.😀

[@Theinkrefillexperts]

That’s great 😀

[@JamesMiller-vi7ib]

⁠ what are you using to flush the printheads?

[@JamesMiller-vi7ib]

I didn’t see any place to order or any brand names or anything. Can I use alcohol or tone or turpentine a proper reply will be appreciated. Thank you.

[@Theinkrefillexperts]

@JamesMiller-vi7ib it’s called printer refresh.

[@michaelf1935]

Please tell us where you ordered your kit from. Thank you!

[@craigdavo]

Brilliant! Worked first time. I was given a printer worth £180 for FREE as it no longer printed colour. I used Printer Refresh and now it's perfect. FREE printer - WINNER - Thanks.

[@Theinkrefillexperts]

That’s such a kind review ! Thank you

[@craigdavo]

@@Theinkrefillexperts credit where credit is due ⭐⭐⭐⭐⭐

[@Theinkrefillexperts]

Again, thank you 😊

[@jilliej7]

Does all the cleaning fluid go on the blotter paper or does some go thru to bottom of printer?

[@craigdavo]

@@jilliej7 all goes one the blotting paper.

[@colinalexander2734]

Most impressed! Blocked head cleaned first time. Very clear instruction gives one confidence to have a go. Will be looking at cartridge purchase from you as well.

[@Theinkrefillexperts]

Thanks very much for the kind comments.

[@stevenhenry4994]

Had no black on my Epson WF-2750 ordered a Printer Refresh Kit very fast delivery easy to follow instruction video fixed my printer blacks are like new again very happy customer thank you very much saved me from buying a new printer.

[@Theinkrefillexperts]

That’s great to hear , thank you for the great review.

[@monoread5368]

@@Theinkrefillexperts I'm a uni student (same printer wf-2750) and my Epson black original cartridge suddenly blocked. I thought it was empty (had around 25% left) so I ordered some after-market inks and they all worked but the black. There is nothing coming out of the black ink I've run the printers self-cleaning program a few times are various stages, tried printing a few pages of text to force the block out but nothing. The printer is under warranty from student finance for 3 years and once I mentioned 'aftermarket inks' they refused to provide any response. The inks work fine (blue, yellow, magenta) are cheaper and provide the same print quality without paying a premium and always recycled for eco-friendliness. I feel quite positively that it's just the black print head that is blocked but I'm worried about using the liquid near the printer near sensitive parts

[@stevenhenry4994]

@@monoread5368 If you read above I had the same problem just follow the instructions in the video mine cleared first time and is still working great

[@Theinkrefillexperts]

Would you please leave me a good review on google ? g.co/kgs/SWY3zN

[@theboganoutlaw3198]

This video just helped me heaps!! My Epson printer has a self cleaning option but it just wasn't working properly, after doing this and doing a nozzle check came out perfect

[@Theinkrefillexperts]

That’s great, thanks very much for the very positive comment.

[@trimerdon1]

Did it on all 4 inks.Cleaned the head three times. still nothing. left it over night. Came back cleaned the heads again had a couple lines missing on the black. did the process again just for black, cleaned the heads three times and its working now!! Thanks you.

[@Theinkrefillexperts]

That’s great 😀

[@chalkychoochoo2304]

I am glad the cartridges will be happy in the cling film while they wait!

[@Theinkrefillexperts]

A happy Cartridge is a happy Printer 😀

[@chalkychoochoo2304]

😹😹😹👍

[@Theinkrefillexperts]

😂😂😂

[@garyten13]

Work perfectly, I thought i needed a new printer, but this stuff fixed it, Its 100% from me. Thank you

[@Theinkrefillexperts]

Thank you very much 😀

[@montybrewster7]

Fantastic tutorial, very clear & concise. Just ordered the kit, hopefully it will rejuvinate a trusty old Epsom. Many thanks.

[@Theinkrefillexperts]

Thank you very much

[@pennyfinch7516]

Hi there, We had a problem with the magenta colour. Bought the kit, flushed all of them through. Magenta is now working but now Black is completely not coming out at all when printing. We've tried sucking it with the syringe to disband air, we've flushed it through a couple of times but nothing is helping. Before we started cleaning there was never any problem with the black. Have you got any suggestions as to what it might be?

[@Theinkrefillexperts]

I would try cleaning again again use the syringe empty to suck upwards also. One thing to bare in mind is that it may not have been blocked and might just be faulty

[@pennyfinch7516]

@@Theinkrefillexperts But the black was working perfectly fine before the cleaning? 🤔

[@Theinkrefillexperts]

Yes but it might simply be faulty , I mean the printer , not printing correctly. It’s not uncommon.

[@adjuster23]

Excellent product. Followed isnstructions and cleaned blocked print head on Epson WF-2530 first time.

[@Theinkrefillexperts]

That’s very kind !!! Thank you 😀

[@EweChewBrrr01]

Thank you for this info. This is the first time I have encountered a blockage that the printer couldn't clean itself. I thought I may have had to buy a new one but you have given me hope. Have an awesome day!!

[@Theinkrefillexperts]

You are very welcome.

[@EmpressPanthera]

Extremely helpful! Thank you for saving my sanity today 😭 Printer is up and working again finally!

[@Theinkrefillexperts]

Thanks for the kind comment 😀

[@DizzyLizzyyyy123]

Thanks for this. What is the long sponge called underneath, where you are putting the blotting paper? Mine has come out and I'm trying to put it back in. Printer no longer works without it. Perhaps it needs replacing? Or maybe I can just wash it and put it back. Any thoughts appreciated! Thank you

[@Theinkrefillexperts]

That’s a sponge to catch excess ink, you would have to contact Epson.

[@amtra1778]

For anyone struggling to get a paper towel underneath the print heads/carriage, stick some tape to the end you're going to be sliding your print head over and stick it down next to the print head and you should be able to pass the print head over

[@Theinkrefillexperts]

Fantastic idea 😀

[@chookey999]

Mine arrived this morning. Ran it through twice on each head till the paper was relatively clean. Still took 3 print head cleaning cycles to get a good nozzle check but I'm chuffed to bits. Thanks Printer Refresh. Arrived really quickly too. Printer is Epson XP-3105.

[@Theinkrefillexperts]

You are very welcome 🙏🏼

[@CholoKiD92]

this worked thanks for the step by step guide , i had been contemplating on a new printer but this saved me $$

[@Theinkrefillexperts]

That’s great , happy it helped you.

[@LilMzFeisty1]

Where did you get the solution from

[@Theinkrefillexperts]

www.118ink.com/shop/epson-printer-head-cleaning-kits/epson-printer-head-cleaning-kit/

[@kristen8363]

Can you use something else I brought a printer second hand and saw somewhere on google you can use water or windex would it be okay to use either of those? As if I can’t fix it I need to return it to seller

[@Theinkrefillexperts]

I would only recommend printer refresh which is available on 118ink.com

[@kristen8363]

I need to do it by tomorrow morning unfortunately can’t wait

[@Theinkrefillexperts]

Sorry 😀

[@HamishAndBabyMonkey]

Thank you so so much. I DID IT!!! I didn't have to ask the teenagers!!! I did it myself and I am useless xxxx

[@Theinkrefillexperts]

That’s great !! What problem did you have ?

[@heavenlycakecompany9214]

Brilliant. It would have been nice to get a whole sheet of blotting paper, but aside from that this is excellent value for money and I only wish I had found you before. Thank you.

[@Theinkrefillexperts]

Kitchen roll works far better than anything 😀

[@Akula114]

Excellent video. Informative and clear steps for improved printing. I had always thought EPSON was another name for "SPAWN OF SATAN" but you've given me hope. Many thanks!

[@Theinkrefillexperts]

Thanks very much 😀

[@GEORGECAPONE]

I have a epson SX415 which when printing or photocopying would just spit out completely blank pages. I ordered your kit and after following the instructions....... my printer is now fully working again ,Great product and easy to use .

[@Theinkrefillexperts]

Thanks for the review , the kit is proving to be a great success.

[@Theinkrefillexperts]

+Printer Refresh Ltd Please call us on 01394 277734 to order direct

[@lukec2226]

2:25 Now my printer wears a tank top. It's become aggressive and gets into fights with other printers.

[@lillegrindalen6714]

Great video👍🏼 I already have a cleaning kit but no blotting paper, what is it exactly, where can I find it in sweden, can I use something else instead? Thanks

[@Theinkrefillexperts]

You can use kitchen roll, it actually works very very well.

[@graemebooth6357]

An excellent product, I used the ammonia-free solution and it completely cleared a blocked print head first time. Highly recommended.

[@Theinkrefillexperts]

Thanks very much.

[@jilliej7]

How long did you let it dry out before you inserted the cartridges?

[@Theinkrefillexperts]

You don’t dry anything. You just clean it with the fluid and reinsert the cartridges.

[@VintageTech1]

Thank you for this very helpful information. I used whatever I had on hand and followed your instructions. A small adjustment and three test print and its good as new. Thank you again.

[@jessicay8207]

What did you use for solution?

[@Theinkrefillexperts]

Hello, it’s called printer refresh, it’s available on 118ink.com

[@MartinHangie]

One of my colours had completely vanished so I wasn't convinced this would work but it has. Strange thing is that after treating it and leaving it over night to do its thing there was not much improvement but when I tried the printer again in the evening it was working perfectly.

[@Theinkrefillexperts]

Thanks ! So glad you found it useful. Sometimes if a printer is totally blocked in one colour it can take a little extra cleaning.

[@ninagrandy4715]

Did you try the whole process again or you tried printing again?

[@Theinkrefillexperts]

Try both. 😃

[@MartinHangie]

@@ninagrandy4715 I tried printing again without re-treating.

[@alexandermocnangan8300]

Thnaks for the video, can we use alternative chemicals as clening solution?

[@Theinkrefillexperts]

Sorry but it’s very important to use printer refresh fluid.

[@cr1811]

This sounds promising. Does this kit work with epson wf-3640? How long does it take to ship to the US? Currently when I print I am not getting any ink on paper. I had left my printer unused for about an year. It used to work well before that.

[@Theinkrefillexperts]

Hello, it takes about one week. If that printed works like the one in the video then it will work.

[@stefanfriedemann3873]

Do you have instructions for an Epson WP-4530? The layout of the hardware is quite different than the model in the video. TY

[@Theinkrefillexperts]

Hello, can you explain how that is different please ?

[@liseflores7]

Thank you SO much! It prints perfectly now. I just cleaned it with some alcohol prep pads that I had and that did the trick.

[@easylifestylegb6758]

Great! can you tell the step's you followed. Cause i couldn't get the solutions online 🤕

[@jayjaymerging2659]

The tube goes to every head ?? Like every color or just one.?? Thanks

[@Theinkrefillexperts]

Hello, as the video says you can do each one. It’s best to watch the video in full before attempting to clean. It’s very easy to follow.

[@SLAVCH3V]

Great Video ! well done. just wonder what size is the silicone tube, I wanna make sure it will fit properly without being loose or anything ? Thanks

[@Theinkrefillexperts]

The tube is very stretchy and will fit all Epson printers that work in the video.

[@kimberlinalopez4811]

This actually worked!!! 😅 & I am a beginner... great video, thank you so much

[@Theinkrefillexperts]

Thanks very much 😀

[@mariomillan01]

Hi!! We have to clean every color?

[@Theinkrefillexperts]

That’s 100% up to you 😀

[@daytonwoodford4386]

great video =you showed putting the cleaner into one nozzle-should all 4 nozzles have the same process...tkx..stay clean and safe

[@Theinkrefillexperts]

Hello , that depends on the printing quality of the colours.

[@daytonwoodford4386]

tkx-gotta clean all four -they used the unit maybe 6 times a year...stay clean and safe

[@Theinkrefillexperts]

Thank you.

[@Haligonian]

In this video, you seem to just have cleaned the cyan print head. Should we remove the blotting paper and do the whole flushing process with new warm solution for the other 3 print heads as well?

[@Theinkrefillexperts]

That’s optional but I would advise just a quick rinse through on all because as the video says all print heads may need a clean.

[@keekeewilliams8322]

Awesome video but I'm lost I have a Epson 16600 and i don't see anything to attach those nozzles to on my printhead. I don't have ink cartridges. More like refillable tanks that's separate from the printhead. Any suggestions PLEASE

[@Theinkrefillexperts]

Hello, have a look at my other videos we do one for an Ecotank printer like yours.

[@dave-javu]

yes yes yes, just got the kit, did the clean and now i can print again! thank you very much, pleasantly surprised :)

[@Theinkrefillexperts]

You are very welcome 😀👏🏼👏🏼👏🏼

[@StanScott]

Thank you thank you thank you you are double awesome for making this video. My printer is back working after 1 cleaning

[@Theinkrefillexperts]

You are so welcome, many thanks.

[@jotaro7411]

from where we should buy this printer refresher lequid?

[@Theinkrefillexperts]

It’s available on 118ink.com

[@tjkuhny]

The video shows only injecting one of the print heads and not all four of the color and black openings. Do you just inject one or do you need to inject each color separately and wait the extended time on each color?

[@Theinkrefillexperts]

You can clean all if needed.

[@shyfisher1170]

any substitutes for cleaning solution ? shipping takes too long right now

[@AnotherKentPaul]

2 questions: Do you have replacement ink cartridges for the Epson WP-4025? And the 2nd: Can you show how to clean the WP-4025 if it only prints stripes in blue and red colours? Thank you so much!

[@mikelewis871]

GOD bless you for this wonderfully informative to the point and easy instructions. You are helping me and many others, as i can see from how many views your channel has had, you can only be proud for the many people you are helping,including myself,WELL DONE!!!!!!!!!!!!!!!!!!!!!!!!! :):):)

[@Theinkrefillexperts]

You are very very welcome 😀

[@25leesha]

Do you think this would work with my old Epson XP-315 that sat there not being in use for over 5 years? I have already tried to clean and make it work again back then but because it wouldn't work I gave up. Just now that I stumbled across my printer again while tidying up the basement I was wondering if it's time for me to throw it away or if there is a chance to save the environment and get this thing to work again? What are your thoughts?

[@Theinkrefillexperts]

Yes it would be very very likely to work. Absolutely worth trying it.

[@25leesha]

@@Theinkrefillexperts Thank you so much for your quick response! I very much appreciate it! I shall try it very soon and will let you know if it worked 🙂

[@deepakhial1403]

Thanks guys, worked beautifully. Went from blank sheet of paper to 10/10 nozzle check. Wish I wore gloves though! lol

[@Theinkrefillexperts]

Fantastic 😀

[@Theinkrefillexperts]

I don’t understand? 😂

[@trevorchargois4590]

Great video. Can you help with locating the blotting paper as mentioned in the video. Additionally, I see a small well to the far left at the end of print head track. What is this for and can it be cleaned. Mine appears to be full of old ink (maybe?)

[@Theinkrefillexperts]

All available in the kit which is on 118ink.com

[@dmthandmade5674]

Just searrched and found your video. I'm going to buy your kit, hopefull it will save my WF7610

[@Theinkrefillexperts]

Many thanks. Here is the link www.118ink.com/shop/epson-printer-head-cleaning-kits/epson-printer-head-cleaning-kit/

[@juliedolan8014]

Thank you so much 2 flushes and fixed

[@frostyzaza]

Hello sir. I would love to buy the kit but im unable due to poor national importation policies so, do you know if using something like isopropyl alcohol will do the trick? Or, do you know a alternative I could try? Thank you and nice video, it is very well done

[@Theinkrefillexperts]

I am sorry but that won’t work.

[@yarmouthiow]

My mate Tony Brown always does it like this. Now I know how.

[@Theinkrefillexperts]

He sounds like a clever guy !

[@TwistedSoul2002]

Sounds like you already knew how... you just confirmed it.

[@nickosnow]

@@TwistedSoul2002 mm

[@AllaraAcret]

Hey just wondering if I need a new printer. I did these steps, the solution flowed through without issues. when I printed the my inks stopped working all together . I was only having issues really with Yellow prior to the clean and now nothing works. Did i completely stuff my printer ?

[@Theinkrefillexperts]

Have you tried running a few head cleans with your printer after cleaning ? This should get the ink flowing again.

[@DefsidemixtapesOnline]

I wonder if this will finally get my CISS kit working with my Epson XP-440?

[@Theinkrefillexperts]

I am pretty sure it would work.

[@frenchi1]

i have an Epson Et15000 ecotank I use sublimation ink with. The colours seem to be faint with no red at all. Can i use the same method? or is there another kit i have to use? Thank you

[@Theinkrefillexperts]

You can definitely try it! ✔️👌

[@crazyfish8747]

Can I use this with my Epson WorkForce 7710DWF. I'm using a removable CIS System with it. I cannot get the black ink to work anymore!

[@Theinkrefillexperts]

Hello yes this will work 😀

[@Theinkrefillexperts]

www.118ink.com/shop/epson-printer-head-cleaning-kits/epson-printer-head-cleaning-kit/

[@mauderenedove5411]

Do you need to do this for each color or just one?

[@Theinkrefillexperts]

Hello, when we clean we do all 4 but you can just clean the blocked on. If you look at the video again it explains why we do 4. Thanks for the message

[@monstroPR1969]

Thank you! I just cleaned my Epson XP-424 using your steps!!! It's working!!!!!!!!!!!!!!

[@Theinkrefillexperts]

That’s great news. It’s amazing how quickly Printer refresh clears blockages , which colour did you have the issue with ?

[@monstroPR1969]

I had an issue with the black color, and now is working perfect! Again Thank you!

[@Theinkrefillexperts]

That’s great news. Would you please subscribe? X

[@milikan29]

I have a BX310FN epson printer. Is this kit ok for that specific model? Thanks

[@Theinkrefillexperts]

Hello , yes it should work well.

[@okishop3477]

2:56.... GOTTEM!!!

[@dinaroseoraiz-tolibas1668]

Thank you so much for sharing this tip sir. Could this be done to all epson printers? Mine is EPSON L3156. Thanks much

[@Theinkrefillexperts]

Hello, it works for the vast majority of printers. If you printer works like the one in the video then it will.

[@jandavis4436]

how often do you recommend a cleaning? My printer is not printing though on the computer it says it is...I haven't had it but for a few months

[@Theinkrefillexperts]

I would start with once and see if that works. If not try twice and do on.

[@JohnnyBeGood790]

Great tutorial, didn't have time to order the kit etc so just used a pipe cleaner and soaked it in Vodka, It worked an absolute treat, printer as good as new

[@Theinkrefillexperts]

Was it a little unsteady after?

[@terisamcconnell7894]

@@Theinkrefillexperts 🤣🤣

[@Theinkrefillexperts]

Glad you approve 😂

[@mongoarts]

Help please, I’m so confused, I just followed the directions after having issues with no cyan printing out, all other ink colors printed fine. Then after a few head cleanings, still no cyan and now barely any ink at all is printing out. I have tried pulling air up with syringe, letting it soak, more head cleans.. Is it possible I used too much cleaning solution? This is a Epson 7210 with CIS, had it a month and this is the first time I’ve ever had an issue with it. I’ve been working on printers for a decade and still don’t know what I’m doing wrong Thanks guys 🙏

[@Theinkrefillexperts]

Hi mate, you could let it with fluid in the lines overnight but your issue could be something other than an ink blockage.

[@alicepuyong]

Did you ever manage to figure out what it was? I’m having the same issue with my magenta :/

[@Theinkrefillexperts]

The ink line could be worn/collapsed

[@Theinkrefillexperts]

I would try running a few head cleans but please remember your printer could be faulty and not blocked.

[@soiczekchrzanu399]

Hello,i have a question I did this and i think that will be better if I wait a few hours after this because physics laws and air in these catridges and etc... Should I?

[@Theinkrefillexperts]

After you do this , run at least 2 head cleans with your printer please.

[@soiczekchrzanu399]

thank you!

[@soiczekchrzanu399]

with catridges or not?

[@jjsmallpiece9234]

Great stuff - worked for me.

[@Theinkrefillexperts]

Thanks 😊

[@carolynj6144]

Hi! I went through the process with your cleaning kit, and when I was trying to push the syringe through with the solution, I was not able to. You mentioned in the video that it would need a more thorough cleaning. Do you have instructions for that? Or should I just follow the tip about leaving the solution in overnight?

[@Theinkrefillexperts]

Yes allow the fluid in overnight but also you can try sucking upwards with an empty syringe and tube there might be air blocking the line. But also your ink line might not be blocked, it could be damaged which could explain no ink going true and the resistance.

[@carolynj6144]

@@Theinkrefillexperts ok thank you!

[@Theinkrefillexperts]

You are very welcome

[@kreese4989]

Worked a treat. Thank you

[@Theinkrefillexperts]

You are very welcome. James

[@Theinkrefillexperts]

Hello ,would you please leave me a good review on google ? g.co/kgs/SWY3zN

[@suminiky]

Hi! Tried it yesterday, left overnight on the heads through which the liquid could not pass, and now the situation is the same...are those print heads forever blocked? :(

[@YamiKisara_]

I found bringing the syringe up to suck up air causes the blocked up printer ink to begin break up.

[@kaizoku47]

try to force the solution ink to go in it slowly,every5 minutes force it slowly until all the ink in the head dropps down

[@Theinkrefillexperts]

Hello , never force it. If I oi are getting resistance then suck upwards.

[@kaizoku47]

@@Theinkrefillexperts mine has same problem ,but i only pushed a little and it was fine !

[@alansutton2980]

Is there enough fluid in the kit and enough blotting paper to clear the two nozzles?

[@Theinkrefillexperts]

Yes but if you think it’s blocked bad you can get our XL size kit.

[@rhondavt3877]

I just bought an Epson ET3760 printer today. Should I always leave it on or should I shut off the power over night. Let me know, thanks! Also, this video was very helpful - I did a lot of printing today & it's starting to show lines throughout the printouts now.

[@Theinkrefillexperts]

Personally I always turn my printer off overnight.

[@rhondavt3877]

@@Theinkrefillexperts Thanks for your quick response! Does this help with keeping the printer heads clean, or just not burning out the machine in general?

[@Theinkrefillexperts]

That I don’t think is true 😀

[@PeterFreitag]

This works! Thank you so much. I have a Epson XP 412

[@Theinkrefillexperts]

Thanks very much !

[@odeifuoahama1277]

Insightful tutorials. Pls how do i get the kits. I'm about trashing my Epson bcos of blocked cyan. I hope this process helps

[@Theinkrefillexperts]

118ink.com 😀

[@telphone7684]

Thank you .... printer fixed!

[@Theinkrefillexperts]

You are very welcome x

[@USMC_Ministries]

Yeah, I’ve replaced black print cartridges twice thinking they were bad but I think it’s the nozzle. Guess I need to buy this kit and give it a try!

[@Theinkrefillexperts]

Yes please, it’s very easy to do 😀

[@patriciaalves1384]

This works! Thank you so much.

[@Theinkrefillexperts]

You are very welcome. Happy to help you.

[@binx4981]

of O maybask, sorry can isopropyl/ethyl alchohol be used for cleaning it as well?

[@Theinkrefillexperts]

No, that won’t work. The product is called printer refresh and is available on 118ink.com

[@df56gh4d5h]

Strips of paper aren't nearly enough to absorb all the fluid and ink. A 1/2 piece of paper towel folded to the same size works best.

[@Theinkrefillexperts]

Hello the paper is enough for must blockages. But as the video says kitchen paper works very well. Thanks

[@stevefahnestalk8500]

He said "blotting paper," which is not regular paper. It's absorbent paper, which will absorb moisture like paper towels.

[@Theinkrefillexperts]

You can use any paper but kitchen paper works best 😀

[@stevefahnestalk8500]

That must be a British thing; I've never heard of "kitchen paper."

[@Theinkrefillexperts]

Kitchen Roll ? Kitchen Towels ?

[@shamfeen]

Hi i have an epsom L355. It has ink bottles instead of cartridges.any tips on cleaning this type of printer.cheers

[@Theinkrefillexperts]

Have a look at my other videos, we have one on how to clean Ecotank printers.

[@utkf16]

Worked great for me but you do need to run the head cleaning program, it took three run through's for my printer.

[@Theinkrefillexperts]

+utkf16 that’s great. If the printer is very blocked it can take a couple of goes. Which printer do you have ? James

[@utkf16]

Epson XP422. Its been blocked for months and I was just going to replace but thought Id give the cleaning a chance, glad I did now!

[@Theinkrefillexperts]

+utkf16 thanks for the feedback. Just out of interest did you have more than one colour blocked ? And if so which was hardest to clear ? James.

[@utkf16]

Originally just the yellow but I flushed all the jets and they all cleared without any problems, much easier than I expected. After the nozzle tests the black was not printing properly so ran the cleaning program x 2 still no improvement so changed the cartridge did another clean and all working.

[@Theinkrefillexperts]

+utkf16 that’s great. The kit Work really well. The yellow is something other kits struggle with but our kit works great on all colours. Thanks for the info. James

[@chriswhitehouse8982]

A couple of questions: If the print head is blocked, will it simple not print anything (blank page)? Or, as mine is, will it print partial lines, some faint and some darker, and generally poor print quality? Also, I have an Epson WF-3540. will this work with that model? Thanks!

[@Theinkrefillexperts]

Partial lines is the most common symptom , but also may print nothing if blocked.

[@LilithTheAquarian369]

Does this work for WF-2630?😱

[@Theinkrefillexperts]

Hello yes it does. www.118ink.com

[@LilithTheAquarian369]

Printer Refresh Ltd everything is working now! I found out the problem. But all of my ink is gone after 2 days of buying. But all of my papers were blank so how did my ink run out so fast?

[@Theinkrefillexperts]

Maybe you are using poor quality Ink. Try our Ink www.118ink.com

[@LilithTheAquarian369]

Printer Refresh Ltd What is a low quality ink in your definition?

[@Theinkrefillexperts]

Well it’s ok to use compatible ink cartridges but just not the very cheap ones.

[@BirdzofaFeather]

We have a WF 3540. I'm a little confused: did you have to do this cleaning 4 times for each colour? Would you replace the blotting paper each time or wait until the end?

[@Theinkrefillexperts]

You can do what ever you like, if the paper is very wet swap sooner. The best thing to use is kitchen paper that you fold into size.

[@rkgsd]

With my old Canon, I could remove the whole print head and soak it in a part ammonia solution. It seems the Epson head not removable.

[@Theinkrefillexperts]

Much easier to use the printer refresh kit. Thanks for the message