How to clean GY6 50/150cc carb

This video is to show you how to clean a carb

[@ZeginMakesMusic]

The dogs aren't as bad as the "Sorry about the dogs" in giant green letters.

[@Tryagain563]

ha ha ha!

[@baldkojak]

Great tutorial! I have a Scooter with a GY6 carb and it seems to be running pretty poor at the minute. Your video makes cleaning the carb out look fairly easy. Thanks for helping out a fellow biker in Manchester, UK!

[@Jonofthejungle26]

Thanks, watching that has given me the confidence to attempt mine this weekend.

[@majorminor5005]

Thanks, man! Ijust cleaned my carb on my Piaggio 180 amalfa. We'll see if it starts now. But in any case, thanks for the great vid!

[@AllRepair]

@19ford96 not a problem glad i could help someone! :) another problem with them is dirt in the gas going into the carb because they have a cheap cheap filter in the gas tank. i would but an inline filter going from the tank to the carb. cheer!

[@dustinplatter]

Can you take the sorry about the dogs subtitle off so you can see the whole picture.

[@AllRepair]

@jesse1779 awesome man! sometimes the pumper leaks because they don't have seals so just sand it flat or just use a small amount of rtv

[@Bladewolf3000]

thanks alot i been having a lot of problums with my 50cc scooter

[@bass22ist]

Very well explained awesome video learned a lot"

[@AllRepair]

Adjust the needle jet turn it all the way in and then out 1 turn and 1/8. If that doesn't work maybe the idle screw needs to be turned in.

[@TheWatchmanChronicles]

Hi, I just bought a scooter and I want to clean my carb, but most of the screws are stripped. Do I have to drill them out or is there an easier way to change them?

[@wildcatbc67]

Great video! I accidentally tore the green wire out of the back of the electronic choke, do i need to buy a new plastic piece or could i just electrical tape the wire in? Thanks

[@applerox28gaming]

Electric tape

[@AllRepair]

dogs=animal rescue. blurriness= some flip cam lol thanks for the feedback

[@Fastghia66]

Well done! It helps a lot

[@craigburke6228]

when you put your float on and off theres that little screw in there to loosen it, mine does not have that little screw, how do I get my float out? at video point 7:20...

[@jesseg010]

after attaching new carb. 50cc still won't start. fuel does get to the carb. and there is spark. but yet nothing. when I poor had directly into the intake it does start. any thoughts?

[@alive1day]

at 4:11 you pulled the fuel vacuum diaphragm apart their was a small O ring that was in there that you did not put back in at 10:05 also on the linkage side of the carb there is another cover you missed that's held by 2 screws and has another diaphragm that's under the throttle cover plate held on by 2 bigger phillips screws, just saying. Over all good video

[@MegaAwesomedude234]

WOOF WOOF MAKE SURE WOOF WOOF YOUR WOOF WOOF

[@tripyramidfilms7187]

Your next video should be on how to feed insane and and UNGODLY crazy dogs carb cleaner.

[@suzannejackson4335]

Good video. Would like if you also had your first steps, specifically getting the carb off the scooter.

[@derrickconnerproductions6007]

very helpful! thank bud 👍

[@Tomahawk837]

Thanks, brother!

[@darrindillman1570]

now do the video for putting the fuel lines back on this I forgot

[@lofturhjalmarsson295]

l did not use carb cleaner , just a rag and my fingars and scraped with scewdriver , some jets were too tight hard to unscrew ,put a drop of wd on them first might help, must use right size head of screwdriver, smallr jet or was it bigger, seemed ,, saw no light through it, hole toos m small maybe. small jet leadingt ot a to a rod sticking out in airway seemed , well the jet was clear but tunnel under it not clear for air blowing , used the run off drain rubber tube put it hard pushed on openings of tunnels and blow with mouth and hear if comes out somewhere. carb was full of water and dirt. and sicns since l did not remove choke or diapharm , first tie choke wires to carb or wires will break from bending back and forth often. tank needs to be cleaned and new filter l guess.

[@jaysoncarmon1664]

great vid thanx

[@camandrews-bisset3694]

anyone help I done this and now it doesnt start

[@dickieboner5889]

Damn I glad I don't live next to you !!!

[@kellypaul8927]

I want someone to make a video showing how to remove the carb!

[@Five.SH00RTS]

you can remove the carb with strong air an fresh gaz

[@SuperHaulesbaules]

you forgot about air cut off o ring.....you did not put it back...

[@AllRepair]

5mm main jets

[@tripyramidfilms7187]

OMG!!!!!! FOR THE LOVE OF GOD! ... WOULD SOMEBODY PUT THOSE DAMN DOGS OUT OF THEIR MISERY!!!

[@jordanmurrayjcm]

I cant watch because I cant stop thinking about why he doesnt go deal with the dogs. Instead we are supposed to listen to them bark and read about how he is sorry. Ugh those dogs want or need something man. UGH why is it that people who have barking dogs never ever seem to be bothered by it at all?!

[@Michael-kd2ny]

WOOF WOOF WOOF WOOF WOOF SCREW THIS OFF WOOF WOOF BANNER

[@KESEDTUBE]

STFU. NO ONE THOUGHT YOUR IGNORANT COMMENT WAS HUMOROUS.

[@Michael-kd2ny]

lol

[@Tryagain563]

Lol! Hilarious having that racket in the background! Still a good video though!

[@Michael-kd2ny]

+sojourner yea

[@skullybiker]

ok first of all your not showing the repair right everyone since ethanol fuel they will have to get a new needle and rubber seal for the float bowl and diagram for the pumper vac do your self a favor and just buy a new carb there cheep ETHANOL HAS ALREADY RUINED THE CARB

[@KrisGenchev]

Thats a 50 cc carb .

[@dajatu]

i can not stand to watch this because of the dogs barking.

[@RandiRain]

Other than the annoying dogs, the occasional blurriness, and some times out of frame, this was a good try and a helpful video. It was obvious that you did this video to help people which makes you a pretty damn good person in my opinion. Any negative feedback can only be from douche bags. Thanks for the video.

[@eviljeff2011]

You didn't show how to set the float level, main reason I watched this video, I set my float so it is spot on parallel with bottom of carb when turned Upside down. I I did this with two different one 50 mL buggies the iPhone and they never would run right or wouldn't run at all

[@okinny1]

Good video. Nicely explained. The dogs were not so bad but the apology for the dogs was on screen way to long. Could have used better and more abundant lighting. Although I figured it out for myself, a little help explaining how to extract the carb from the engine would have been a nice touch. All in all, great job. Very helpful. Many thanks.

[@AllRepair]

yes i know the pumper for the carb cover was not put on because it was leaking from there and i have to re-surface the two parts.

[@alexfroncillo]

I have a question...scooter starts right up idles fine but when I try to give it some power the engine dies....immediately...tried using some sea foam cleaner in the tank but no luck~ any ideas?

[@gregbraxton1715]

my scooter has been sittin 4 three yrs. iv'e drained the old gas nd oil out nd placed with new fluids. iv'e gotta hold the throttle to keep it running .when i let go it cuts off whats the solution.

[@Cashdog1962]

I build guitars. Never worked on anything with a motor. I bought a scooter and was told the carb needed cleaning. Watched your video and its like brand new . Very good job dude. Thank you

[@cleancasey]

I watched all the way through and will do so again as I strip it apart. I will comment again after I get done and my bike starts up....lol...150cc redstreak

[@Bama_Medic]

great video thanks. got my wife a xingyue 150 that had old gas gum it up. the scooter only has 450 miles on it. It looks like new also be cause it has been garage kept all along. thanks again. I will be doing this tomorrow.

[@tripyramidfilms7187]

Damn, do those dogs EVER shut up???That would drive me absolutely crazy!!! I couldn't even focus on the video! All I could hear was the dogs! I would take them out in the middle of nowhere, and leave them.

[@AllRepair]

nice im working on building a drag scoot with a 103cc stroker should be pretty fast!

[@eviljeff2011]

Meant to type 150cc and iPhone wasn't supposed to me there, sorry

[@AllRepair]

Thank you for the comment. make sure everything is super clean.

[@tripyramidfilms7187]

If those dogs lived near me, and I had to listen to them for even 10 minutes, they would be taken care of.

[@tellmesomething2go]

you did`t take off the cover under the throttle cable support bracket.

[@SirCylon1337]

Thank you for your help now I can clean my carb.

[@480_Detailing]

Can somebody link me to this exact carb please

[@darrindillman1570]

Great video thanks for the help.

[@nctrooper10722001]

Damn dogs are like annoying

[@AllRepair]

so do mexicans

[@AllRepair]

your welcome

[@Lisa1111]

Hi! I just took my carb off to clean it and I am left with a little copper piece that looks like a jet but it's not. Who can help me asap? I can provide a pic! Thanks!

[@keke5631]

11:11 I could

[@Lisa1111]

You are most sweet but I'm all set now! Thank you!

[@kkccantrell]

canada aye!

[@greentoker26]

Nice video very informative thank you been awhile since I've cleaned one and now I am ready to get to it.

[@crayjackson757]

Thanks for the vid! It's just like having a dad :D

[@Polaciouskolanskis]

What you uses to clean it

[@seanneal552]

Let see. It's a carb. So try carb cleaner.

[@Polaciouskolanskis]

Gas carb cleaner spray

[@coolmojito]

Let's see: i have "engine cleaner" and "motorcycle chain cleaner" - any of those good for this?

[@seanneal552]

No. Try carb cleaner.