How to clean wagner paint sprayer control pro 150 / 130

[@Bellthorian]

I appreciate this, I just got the 130 and am going to prime my bathroom walls with it tomorrow.

[@rxeric300]

This video has just made my life so much easier

[@psychrave]

Very concise and helpful. Thinking about buying one of these and this video helped me make my decision.

[@swistedfilms]

Thanks! I'm no painter but I've got a house to paint and this tool is going to make things a LOT easier and faster! And now I know how to clean it for use about 5 years in the future!

[@41GAR]

That was such a good explanation, very easy to understand and see.

[@w.glennrobbins1799]

best information I have seen on the 130 thank you

[@donnienicholson6062]

Great video.I painted my entire house 5 years ago and could barely remember how to turn the unit but this video has me ready to repaint the porch and some new lattice work.

[@domandbon]

Brilliant! So jam packed with great tips. Thanks so much for posting this!

[@billshowto]

👍

[@karenwilliamsmccollum2584]

Thanks. Your instructions are clear and simple, just as I like it. I have a wood fence project coming up.

[@jimmytwinsburg4734]

Excellent presentation, thank you for sharing. Convinced me to buy this sprayer !

[@chrishinch8810]

Great tips especially using the rag. I’ve been reluctant to use my 150 for anything other than the largest DIY jobs because the cleanup has been so painful. This is going to make things a lot easier!!

[@Jaredxstp]

I was gonna get the graco x5 to paint my basement I’m finishing then reading comments someone mentioned this Wagner 130 and said they got this instead since it was easier to clean and I think this is the way to go after seeing how easy it is to clean. Looks like you can get it all into one little bucket to dispose of easily

[@tonebone2895]

Thabks for the video dude!

[@snugglepott98]

Thank you so much for teaching us! love your videos keep it up!

[@edwinvonessen1165]

Ok, I just watched your video and found out that my control pro 130 spray handle assembly does not have the filter inside of it. Also in front of the piece that contains the filter has an assembly with a long nylon screw a spring with a washer and a ball bearing inside. It contained paint that was setting up. My parts manual did not show these parts. I need to call the manufacturer now for the correct assembly of washer, ball bearing and spring placement. Crazy that I didn’t see them fall out of this part of the spray gun itself. Thanks for your video it was a good learn how to clean.

[@anthonyb8208]

Will be watching this again before I use mine for the first time, but looks dead easy, thanks Bill. 👍

[@xxnonstopdancingxx]

Wet rag tip is genius

[@Two_Bluebirds]

Thank you for this information. A bowl scraper might save more of that paint though.

[@jeffries1232]

That's how we do this now gamg,nice vid Bill

[@haydenl6761]

Great video bill. Purchased the 350 after you originally featured it on your channel. Cleaning the tips with water is a must! Made the mistake once before lol

[@matthewsanger3476]

Well done bill 👏

[@billshowto]

👍

[@LAINEALLEN-e9z]

This was really helpful thank you!

[@bruceevans2137]

bloody brilliant video mate. Thank you. Going to buy one now.

[@AfricanFlightStar]

Good info thank you, just what I needed to see.

[@Detroit3000]

Another awesome video, thanks Bill. I was think of purchasing one of these bad boys to repaint the house

[@marcdessureault2235]

Vraiment bien fait comme vidéo ludique…. Un grand merci😊

[@Mr10000ft]

Thanks Bill, much appreciated.

[@robinbuntic758]

Great video mate, it helped me out a lot!!

[@markusschellenberg4684]

very useful! Tanks a lot.

[@joek9743]

Great tutorial. One question I have, is after you've applied one coat of paint, do you need to clean and go through this process before applying a second coat the following day etc?

[@MrVasmikey]

Thx mate! Great video!

[@The_BubbaHoTep]

Awesome video review, thanks so much!

[@georgebell149]

Thanks for the tips here.

[@73econoline]

Great video, thx

[@NS-dd9ou]

Thanks for this video. Does the same procedure apply for oil based paint/primer but replace cleaning water with a thinning fluid? I bought this unit a few weeks ago but don't wanna use it until knowing the cleaning procedure for oil based products. Anyone knows? Thanks!

[@Sockdarner007]

Good work my bro

[@lennettepageruss1751]

Great video..Emergency what if The paint hands dried.in the tube and machine how would you clean that out thank you for all of your information In advance.

[@alexiweigl8880]

Do I have to clean the machine out after every use? Or if I’m going to be painting over the next few days with the same paint I can store the end in the bag like you did?

[@MuttonChops24]

How do you clean it if you use oil base paint or primer?

[@angievillada4638]

Soo. Mine did not come with a filter on the gun. Is it suppose to have one?

[@billybrackman5143]

Thank you mate! 👍

[@billshowto]

👍

[@artv4nd3l4y]

Thanks I eventually found the best method is to wipe it out after brushing, especially with latex paint you can reuse them if you wash off quickly.

[@AA-cb7vz]

Hey Bill love the vids very informative. how do you clean the unit after using enamel paint? what cleaning solution? Cheers

[@billshowto]

I never use oil based paint through the units due to the effort involved in cleaning it.

[@jcdriver8500]

What about on oil base paint? Like stains That’s what I’m going to use on it

[@grannydeen1586]

Do you run some mineral spirits through for storage or pump armour?

[@denniswgkeys2478]

Hi Bill, you certainly know a lot of great tips, thanks for sharing with your great videos. A question in regards to the Wagner 130/150 7.5m hose, will that fit the 350 you have. Why I ask , sometimes you don’t need a 15 m and a shorter hose can make the job a bit easier. Eg doing gloss work in a kitchen. Plus you don’t need as much paint due to the shorter hose. Keep up the great work, much appreciated.

[@FreeRad1cal2008]

Good run through of the cleaning steps mate. Thanks for the tips. Many often ignore the importance of cleaning paint equipment after use.

[@billshowto]

👍👍👍

[@R3DNEWS]

Help please, Did your tray leak, there's a little undertray by the connector valve coming out the bucket and mines leaking underneath where the little drip tray is, made a right mess do you know why ?

[@asdmuzak]

I've got the COntrol PRo 150, It use to run great but now it is leaking from the bottom, underneath the hopper, everything is clean, what's the grub screw going into the side where it has been covered up under the yellow plastic parts, this is a common problem and there is no answers online. ANy clues????

[@zacj63]

Very helpful thanks for sharing BILL👍👍👍

[@billshowto]

👍👍

[@manzerasobrado6045]

what is the voltage of control pro 130 sir This is 120 volt?or 220 volt? thankyou

[@anthonyb8208]

Got one of these. Thanks for the tip Bill. What's it paint like.

[@dancoope256]

Do you use pump armour for storage?

[@chessPrabu]

I am about to buy a this wagner pro but i am confused with 130 pro/150 ,pls let me know what is the difference

[@billshowto]

As far as I know, they are the same unit with different name depending on the country

[@eyalyatzkan3098]

hey Bill, I want to use the sprayer for everyday use of lacquer in the woodshop, how long can it store the lacquer inside without cleaning? thank you:)

[@paulduke2652]

Hello, can this work with both water based and oil based? I'm sorry, I am still learning.

[@simonneill4318]

Hey mate, I’ve just got myself this piece of kit. Have you had any issues with it since you started using it?

[@orchardfamily1481]

Would be better if you cleaned the return pipe in a dirty bucket instead of in the machine because it makes the water dirty again.

[@renostubbs8504]

Same thing I was thinking

[@mcpainters]

What about oil based paints

[@geoffstein3896]

Another handy great video Bill. Thinking of buying one, is there heaps of overspray and messy? I want to paint the interior walls if possible. Cheers Bill

[@nasdriver3583]

It’s very messy, not so bad in rooms but in a narrow hallway it’s a total pain

[@likeat6639]

Hey what end do you use on this? O had so much over spray it was nuts

[@mijit.859]

OK! But what about using a Pump cleaner/lubricant to maintain the airless paint sprayer after using the unit etc??? 😕🥺😰🤦🏻‍♂️

[@BJ-jt9yr]

It would have been less work had you let the paint in the return tube to another container than back to the bucket. Great video tho.

[@dennycrane4261]

This machine is good, but it will break down after 5 or 6 uses, the pump fails with the cleaning, because you CANNOT just clean it with water after using for a couple hours straight, the paint creates a film that only comes out with LAQUER THINNER,otherwise forget about cleaning this, idk if it damages it,but it will fail, and wagner will not backup the warranty

[@TheRealMrCods]

👍

[@billshowto]

👍

[@rustyshackleford4668]

Looks like a huge pain in the ass to clean. Brush, Roller, and bucket. Takes 5 mins to clean.

[@L.E.E-iiLVyo]

So easy to clean 🤣🤣 just sent mine back don't buy one . I warned you

[@C.C963]

Title should be how to go over the top cleaning your machine. why drag the process of cleaning it out for 10 minuites? For the video i suppose 😞

[@mohamedsidow8701]

👍