How to Clean & Wax your Isinglass Properly! | Boat Detailing Tips | Revival Marine Care

[@EricRaroha]

I used Drakes advice on waxing my boat and now I get better gas mileage with my car. This guy is a legend.

[@DrakesDetailing]

Best comment yet! Ha

[@EricRaroha]

@@DrakesDetailing Thanks. We do appreciate your advice. Keep up the good work.

[@DrakesDetailing]

Thanks bro!

[@ibrahimaldwaik5523]

you're amazing man ! ,all the detailed steps you make are making no excuse to not do it by myself ,and be good at it huge thanks to you man all the love and support ,, keep going !!

[@DrakesDetailing]

Thanks bro!! Go do it man!

[@cbylinski]

Hey, Drake. I followed your advice exactly, including the Menzerna 400 step, and the result was fantastic. I knew I knew it was working when i noticed during the Menzerna swap the Isinglass becoming more pliable. Thank you!

[@mchaves7663]

Hi Drake, how do you do to remove oxidation from plastic clears? thank you

[@scottmiranda7254]

I just started watching your videos the other day and love them. I am now gonna try to wax my boat and glass when it gets a bit warmer. One question. What da polisher do you use as there are many out there? Thank you

[@DrakesDetailing]

I like either the Griots garage DA or the Maxshine DA

[@swhoshing6237]

Thank you for your channel and the knowledge you are sharing. 👍

[@DrakesDetailing]

You’re welcome!!

[@GoldenCALBears]

Thanks Drake for all your awesome step-by-step detailing videos and product suggestions. It's clear your spend a lot of time putting these together for us amateur enthusiasts. Much appreciated brotha! Follow-up question on using Menzerna on slightly hazy/cloudy Isinglass: When using 400, is there a decent chance the abrasiveness of the product alone is enough to irreparably damage/scuff the Isinglass? If so, should I start with the 3500 or 2500 and see if that's enough to cut that haze in the glass and work my way up to 400 and back before I get to sealing it with the Jescar? Thanks again!

[@jaredbaker9762]

Would you still suggest Jescar as the best wax/sealant to use on freshwater boats? Thanks!

[@DrakesDetailing]

Yes!

[@jimmyjernigan9642]

Hi Drake, I'm assuming the jescar is also good for fresh water locations? Thanks

[@DrakesDetailing]

Yes! It’s even better on fresh water

[@dblanks7191]

Hey Drake, could you make a video on the rope and harness, what gear you use, knots etc

[@DrakesDetailing]

If I find the time I definitely will

[@dblanks7191]

@@DrakesDetailing Sweet! Thanks 👍

[@rigorod8970]

Having all new isinglass installed. What pad type are u using I see it’s black cloth. Is new isinglass have protection when new?

[@DrakesDetailing]

Hey man! If it’s brand new I would just apply polymer sealant by hand

[@pamiwamoto]

Hi Drake, what is the circular micro-fiber cloth you are using on the machine? Brand? I don't see where it's at in your links. Thank you!

[@DrakesDetailing]

shinesupply.com/products/one-step-microfiber-hdo-pad This is what I would use 😎 Don’t forget to use my discount code DRAKE15 for 15% off the purchase!

[@claudebylinski4910]

Great video, as always. After I do this on the Isinglass, any suggestions for the canvas? Thank you.

[@derekvonberg]

Claude B:,.( *I use 303 canvas cleaner & 303 uv protection. On canvas. )or purple power like a Drake’ said for the $ can’t beat the cleaner. Dawn will work too . And sorft/med shure hold brush *I recommend definitely put some type of protection after cleaning. 303 uv protection is a god one too , I buy it buy the gallon I use it on everything.

[@scottfuller6042]

Great video! very clear and precise instruction on how to maintain isinglass that's in good condition. What type of product(s) and application do you recommend to restore older cloudy isinglass vs. replacing? Thanks!

[@DrakesDetailing]

Honestly, I don’t really do a lot of polishing faded isinglass. I actually have a isinglass glass guy that I sub my polish jobs and re outfits too! I have polished a few though, you can use menzerna 400 then follow 2500 and 3500 on a while and black lake country foam pad. It’s best if you take the glass off and polish on a smooth flat surface.

[@DrakesDetailing]

Use a DA todo these steps

[@DrakesDetailing]

Also, be careful doing this, it’s easy to burn if you let the pad get to hot. Also when taking the glass off be carful not to break the glass or zippers

[@derekvonberg]

Good day Drake , I too am a boat detailer for years , I have a question of topic; I need very big sunglasses that helps protect my eyes from sun and products ect . What sun glasses are you wearing ? And where can u get them for best price? ( p.s. your talented putting these videos together. Thank you for your help ( sorry off topic) thanks 😎🙌🏼 You have a lot of great digital experience. Thanks if you know a place for great big shades / I have lost and ruined my costa Del Mar’s , actually dropped them off 101’ top first thing. Maui Jim’s to nice to be getting compound and ya know….. if you could lmk what you found at the best price the ones In this video look good and idk if there 200 bucks or not but if there good price I can use to work in . Appreciate it

[@DrakesDetailing]

Hey man! There Costa Sunglasses 😎 I don’t remember what the model is. You can pick them up at West Marine, Bass Pro, or you can order them online. They’re expensive but worth it!!

[@JonathanRobichaud646]

Hi Drake, would love to see the harness and rope systeme and how to use it. Thanks

[@DrakesDetailing]

Hey bro, honestly it was one off of Amazon. I’d you type just in standard safety harness on Amazon and it should come up

[@55debralee]

Hey Drake! Great video. I appreciate the good instruction. Do you have an alternative for Jescar Power Lock Plus? I'm having difficulty getting it in Delaware. No one carries it and Amazon has delayed my order. Thanks!

[@DrakesDetailing]

Hey bro, shine supply make a good sealant! But I don’t know if you can get that any sooner than Powerlock or not

[@235112347]

I am starting to use your processes to detail my own 28 Carolina Classic. Do you have specific videos on restoring and polishing up the aluminum and stainless steel on the boat?

[@DrakesDetailing]

m.kzbin.info/www/bejne/naDKiqSvn5agiZI

[@Felix-bc9xx]

Great video, great job!

[@DrakesDetailing]

Thank you for watching!

[@owensimmons4872]

What are your thoughts on the driven brand I got that at a boat show and I love the seat cleaner but haven’t used the rest of there products yet just want to know what you think of it

[@DrakesDetailing]

Unfortunately I don’t have any experience with that brand, I never heard of it until now! Sorry

[@MikesAutoDetailing]

Great work, great job

[@DrakesDetailing]

Thanks bro!

[@ericbywater5749]

have you used ardex ocean polymer before? was wondering if the Jescar Sealant lasts longer.

[@DrakesDetailing]

Yes, Ardex ocean polymer is great! It’s was last about that same

[@brianinduni1342]

Drake, awesome detail and focus on quality! You stand out among others who are posting "how to clean & polish isinglass". Questions: the DA you link to is NLA. Any other recommendations??? Also, does it need to be a DA? I have a Makita vary speed buffer but not a DA. Last, what do you think of the cardless DA's? They are lighter, which is a plus, and no cords, but I have had the cord save tools from falling in the water in the past.... Thanks again for the time you put into this video

[@DrakesDetailing]

Hey Man! Don’t use your Makita, it’s way too powerful and it’ll burn right through your isinglass. Buy a DA polisher. I personally really like the Maxxshine brand DA’s. Use that with a orange lake country foam pad and some Menzerna 400 to get the scratches out of your isinglass. They apply some Starke Hyperhold polyer sealant for protection 😎 Here’s a link to my website where everything available from DA polishers, other machines and all other products and pads mentioned above! drakesmarinedetailsupply.com/ Plus if you’d like to learn more about not detailing in general, I also offer live recorded training class that you can take at your own pace. It’s got some really good info, feel free to check it out! www.detailuni.com/a/2147504321/GMGkUUpS

[@kevinwerner1645]

You mentioned you washed with soap and water before you applied the diluted purple power...what type of soap did you use? Thanks!!

[@DrakesDetailing]

Orpine boat wash

[@MattyMattnj1]

What about if you have scratches? can they be buffed out? what do you recommend for fixing scratches in the costa clear or Eisenglass? Thanks 👍

[@DrakesDetailing]

Yes! Try some Menzerna 2400 on a DA with an orange lake country forced rotation pad

[@Guerrero1187]

What do you tie off to? The radar arch? I have a newer silverton convertible with soft top. What would you tie off to for harness

[@DrakesDetailing]

yes the arch will work fine! anything that is stable enough for your weight!

[@windyholland2070]

Does this process get scratches out too? the glass your working on looks new, mine is not so new cloudy from sun damage and scratches where someone else tried to clean it. New Yacht owners trying to clean the glass as best we can before we have to replace it..UGH

[@Pepin555]

Is there a product you would recommend for restoring isinglass using a buffer?

[@DrakesDetailing]

Hi Megan! Try Menzerna 2400 compound on a orange forced rotation pad on a DA polisher. Polish to a haze, then wipe off. Do not use any heavier compound than the Menzerna 2400, it will ruin the isinglass. I’d the Menz 2400 does not clear up the hazing or scratches in the isinglass, then it is too far gone.

[@Pepin555]

@@DrakesDetailing thank you so much for the reply!! I will give that a try!

[@Cissy-b9v]

What do you recommend to use to properly clean your terry towels?

[@DrakesDetailing]

m.kzbin.infoQvw5-9XEoco Here ya go, this should help 😎

[@danhanlon8260]

I noticed you listed Orpine Wash and Wax. I know in some of your other videos you said that the wax in a typical wash and wax isn't good for boat detailing. Is there something different about this product and when would you use it?

[@DrakesDetailing]

I like orpine wash and wax when I am washing a waxed boat, it will keep the wax safe and will not strip it off... typically when doing a detail, I like dawn because it strips off any waxes that maybe on the surface to give me a fresh clean surface. Only use dawn if you are going to wax it immediately after. Use orpine wash and wax when you want to protect the wax and clean the surface.

[@danhanlon8260]

@@DrakesDetailing Got it. Thanks bro!

[@zachmeyer709]

You said you use power lock for salt water specifically, do you recommend that for fresh water as well?

[@DrakesDetailing]

yes, it works even better in fresh!

[@FaithisKey792]

Thank you drake.

[@DrakesDetailing]

You’re welcome’

[@FaithisKey792]

@@DrakesDetailing Good morning Drake, right after I used the menzerna 400, do I need to wipe it off or can I go onto the jescar power plus right after.

[@DrakesDetailing]

Yes wipe off after every section you do

[@frankessiambre4178]

Hi Drake, you often mention your dual action polisher. Is my Meguiar's MT300 Professional DA, Good enough to do the work that you’re showing us how to do on our personal boats how does it differ from the ones that you’re using.

[@DrakesDetailing]

yes, that DA will work fine!

[@germanlopez4134]

Hi i alway watch your video for me they are the best i learned a lor but now im trying to clean my issing glasses they are fade not old havent clean it for a while i tried starbrite but nothing they still some fade what product do you recomend to become clear please

[@germanlopez4134]

If you can let me know what to use ill apreciate

[@DrakesDetailing]

Hey Man! For isinglass polishing I usually recommend either Starke Ignition or Menzerna 400 on a Lake Country White foam pad on either a flex of a DA.

[@screamingworm7881]

What do you think about plexus on isinglass

[@frankgeck547]

Drake need some help here as followed this video and used jescar and did not notice really any difference as isinglass a little scratched and also slightly cloudy . Was hoping this would restore it but now looking below use Menzerna ? Also do not see link to products below to know what to get pad wise etc.

[@DrakesDetailing]

Hey bro! If you want to get starches out of Isinglass, you can take some Menzerna 2400 with forced rotation machine and a Lake Country orange forced rotation pad and it will clear them up

[@edmurphy9002]

What buffing machine and pads are you using in this video?

[@DrakesDetailing]

In this video, I was using a Griots garage machine and a lake country pad

[@jimmyjernigan9642]

Can you use the jescar on fiberglass? Thanks

[@DrakesDetailing]

Yes and paint as well!

[@edredmond2448]

Will this work for Isinglass which is clouded as well? I just bought a boat and the Isinglass is very cloudy and I'd like to try and restore it before I pay $$ to replace it. Keep up the great videos.

[@DrakesDetailing]

You can do this, but it will only be shiny for a few weeks. You’ll have to polish it.

[@DrakesDetailing]

Use starke elevate to polish the isinglass with a white lake country foam pad. Then do these steps.

[@DrakesDetailing]

Starke elevate. drakesmarinedetailsupply.com/products/starke-elevate-medium-cut-compound?_pos=10&_sid=e67b15e5c&_ss=r White foam pad drakesmarinedetailsupply.com/products/lake-country-force-white-foam-polishing-pad?_pos=2&_sid=dd693c3c2&_ss=r

[@edredmond2448]

@@DrakesDetailing thanks very much, I'm excited to give this a try. take it easy and happy holidays

[@DrakesDetailing]

No problem! Thank you

[@gerrymorgante9643]

I live in Buffalo New York last year. We had Canadian wildfires come down from Canada and it got on the isinglass which is a year old and has distorted it. Can I buff and wax it or is it a waste of time?

[@DrakesDetailing]

You can buff the isinglass, you just need to be careful. Use Menzerna 2400. On a forced rotation machine, with an orange forced rotation pad by lake country

[@gerrymorgante9643]

@@DrakesDetailing thanks

[@wesleyhofstetter5859]

Can you reuse the microfiber pads? when do you know when to stop using it? I was planning on using one pad for my entire boat.

[@DrakesDetailing]

Yes, one pad will last a while

[@stevecoscia123]

If the Isinglass is slightly cloudy, will this work? Or should I just save up to replace them? In this video they seem cloudy at 7:25 mark, or is that product you havent removed yet?

[@DrakesDetailing]

you can polish cloudy isinglass with menzerna 400 on a white foam pad on a DA then do what's in the video!

[@gman7708977089]

Can I use the same product to clean strataglass?

[@DrakesDetailing]

Yes!

[@MRScrubNasty]

Ok, so how about tips to restore it when its in questionable shape? Any ideas? I'm not sure wet sand or heavy cut is going to work here.

[@DrakesDetailing]

You can use Menzerna 400 on a white lake country force foam pad

[@adamjablonski9064]

@@DrakesDetailing Check out Auroramarine.com. They have great products for boat cleaning/detailing and one of their products is specifically designed to restore isinglass. I have used many of their products and been very pleased with them. Let me know what you think. I'm not a professional, just a DIYer so I'm certainly no genius on the subject. LOL. FYI, I would say my favorite product is their "Boat Scrub". It is great for removing light oxidation or stains in gel coat. And Drake is absolutely right about using Polymer Sealants, they are the way to go for protecting your vessel. They chemically bind to the substrate (gel coat) and create a sacrificial barrier to protect your surface. If you continue to keep that sacrificial barrier in good shape, your underlying material will continue to look wonderful. Sorry for rambling. If you have any questions let me know. I am really enjoying your channel. It's like the only true "Boat Detailing" channel that I have found. Keep up the great work.

[@DrakesDetailing]

Thanks!

[@ibrahimaldwaik5523]

i just was wondering how to replace the product for the products I might have here in Jordan , I don't think I'll find the same exact product u use , so like the purple power or the wax , how to know what to use not depending on the name of the product ?? like what's the scintefical material it should be ?

[@DrakesDetailing]

Man! I am not sure, ha I have never been asked that question before! Let me kinda look into it for you!

[@ibrahimaldwaik5523]

I'll really appreciate it ❤️

[@DrakesDetailing]

See if this will work! www.jordan.ubuy.com/en/search/?q=Chemical+guys I don’t usually recommend chemical guys but I guess it’s better than nothing! Ha Also, purple power is just a simple degreaser cleaner, so whatever brands in your country that are simple automotive degreaser should be fine, just dilute it down with water!

[@windyholland2070]

Does the product you use work on stratglass and Isinglass? We have strataglass, I have cleaned it with IMAR, Novus, Clear View...doesn't seem to work. Glass is better but not clearer.

[@Islandhopper79]

I have the same question.

[@johnmalecki8197]

Does Jascar hold up well in fresh water? Lake Erie?

[@DrakesDetailing]

Yes very well! You should get all drain out of it with proper care!

[@germanlopez4134]

Do you have any video or explain how to you mezerna 400 on the isinglass to make it clear please

[@germanlopez4134]

Please let me know

[@DrakesDetailing]

Hey Man! I would put an orange lake country foam pad on a DA to polish out the isinglass! Here’s a link to the pads and the Menzerna 400! Make sure you select the right size pad for your backing plate on your machine before you check out, hope this helps! drakesmarinedetailsupply.com/collections/pads/products/lake-country-force-orange-foam-cutting-pad drakesmarinedetailsupply.com/products/menzerna-heavy-cut-compound-400?_pos=1&_sid=1d1c02ae7&_ss=r

[@germanlopez4134]

@@DrakesDetailing i order from you the white one in stil waiting on those so the white one is no good for that?. Has to be the orange?

[@glenvarza2111]

Thanks for ur videos! What do u recommend to clean the ising glass with throughout the season after this sealing process???? Thanks so much

[@DrakesDetailing]

Honestly just water is easiest, I would also apply starke replenish about once every 2 months or so

[@captainkrunch6372]

Any recommendations how to remove dryed foam cannon soap from eisenglass, I can remove it with my fingernail,, ita a waxy consistency?

[@DrakesDetailing]

Hey bro! We are actually unsure of what you mean, was it not rinsed off when it was applied?

[@captainkrunch6372]

@@DrakesDetailing that is correct, I believe my dock neighbor cleaned his boat with his foam cannon and left over spray that dried on my glass, as it has an orange hue to it and it's on his side of my boat, and he did use a foam cannon to clean his boat.

[@jeffs9530]

My Isinglass is 15 years old. Will this restore it to some degree?

[@DrakesDetailing]

For your using glass, I would use Menzerna 400 with either a DA or a forced rotation machine with a Lake Country orange pad. This should get them looking 🔥🔥 Then you can do what you see me doing in the video, which is applying polymer sealant for protection. Here’s a link to my website where you can buy the products😎drakesmarinedetailsupply.com/

[@lindasorg3893]

If there is a haze, will this remove it? If not what additional steps need to done prior?

[@DrakesDetailing]

Hey bro! If there is a haze, try Menzerna 2400 with either a DA or a forced rotation machine with a orange lake country forced rotation pad.

[@mcronn]

So how do I remove fine scratches from Isinglass ?

[@tall1fin1]

Jescar Ultra Plus?

[@DrakesDetailing]

I haven’t tried the ultra plus, just the powerlock.

[@Grady252]

Seems the micro fiber pad is no longer available on Amazon? Any other sources?

[@DrakesDetailing]

www.detailedimage.com/wax.php?id=94879&url=detailedimage.com/Buff-and-Shine-M107/Uro-Fiber-Microfiber-Finisher-Pad-P1727/3-S1/

[@DrakesDetailing]

Make sure you pick the right size either 3, 5 or 6 inch

[@pelagichunter]

How do you clean plexiglass? Love the vids

[@DrakesDetailing]

You can wax it, or seal it the same way I did in the video.

[@pelagichunter]

Sorry if this is a dumb question but I’m assuming car soap would be safe to spray plexiglass on directly with a foam cannon then a quick rinse?

[@DrakesDetailing]

What car soap?

[@pelagichunter]

I was hoping you could recommend something! I was thinking something affordable like mcguires right now I have an aluminum offshore center console so it doesn’t need anything special and wanna use the same soap for my cars. The big thing I’m worried about is the plexiglass enclosure I have around my cc everyone online is saying mild soap is okay but absolutely no other chemicals

[@DrakesDetailing]

You can get Mcguires gold wash and wax from Walmart. Really any car wash soap that says wash and wax is fine

[@timconway8422]

How do you properly clean strata glass Thanks In advance

[@DrakesDetailing]

this product works great for cleaning and protecting in one step drakesmarinedetailsupply.com/products/starke-hydrate-waterless-wash-rtu?_pos=1&_sid=d10eaeb8a&_ss=r

[@Grady252]

Another question, how long does this Jescar sealant last typically?

[@DrakesDetailing]

About four months on average. That’s all really most waxes and sealants will last on any boat.

[@Grady252]

Hi Drake, been a while, but just found that Jescar is making a Ceramic-Polymer coating that claims a longer lasting protective coating. Have you tried it on the Isinglass/Strataglass and any results?

[@jeffrylopez5251]

For work done in this video, what would be your fee?

[@DrakesDetailing]

This was an easy job, around $250 to $300

[@jeffrylopez5251]

@@DrakesDetailing Wow quick reply,,, Dig the video's,,, Keep killin it!

[@DrakesDetailing]

Thanks man!

[@phanc70846]

Drake's Detailing You do work in Miami?

[@DrakesDetailing]

We are based out of Pensacola Florida. But we will travel to the boat if need be, most customers will arrange flights and what not for us to get there.

[@Dbbg439]

Can you use a ceramic coating on isinglass?

[@DrakesDetailing]

Yes!

[@sandramariesmith1600]

How do you remove decals?

[@DrakesDetailing]

There’s a couple of ways you can go about it, you can take a heat gun to the surface and peel it off with a plastic razor blade, or you can buy one of those 3M eraser wheels that goes on in the end of a drill.

[@Andrico77]

My strataglass instructions said to use nothing but their Imar product...

[@seekaseat7955]

Can i used my rupes millie big foot?

[@DrakesDetailing]

Yes you can sue the Mille for this, but be careful as it has more cutting power than a regular ol’ DA.

[@brianklawitter8710]

How do I get oxidation off? I have over $200. Worth of product, all claiming they will clean off the cloudiness caused by oxidation and none of them work. Please?

[@DrakesDetailing]

Do you have a polisher ?

[@brianklawitter8710]

Not so far but it sounds like I’m going to be getting one. :)

[@jgsmith1624]

Sorry, what make and model.

[@DrakesDetailing]

They are Costa Reefton 580Gs

[@mattrumpf740]

What if your isenglass is very cloudy? Mine hasn't been cleaned in 20 years. 😂

[@DrakesDetailing]

Isinglass cloudiness and scratches will sometimes clean up with Menzerna 2400 with an orange foam pad on a DA polisher. Hope this helps!

[@jgsmith1624]

Sunglasses?

[@DrakesDetailing]

Are you asking why I have sun glasses? Ha