I know this is old but my clips working like a champ now!! Good video. Needs more love.
@karlosblends2 ай бұрын
Glad it helped!
@NyeshaDavis Жыл бұрын
Super helpful! I cut my own hair and the blade wasn't aligned anymore. Watched your video and now I'm good to go. This was perfect!
@joecool976 жыл бұрын
Great Video! Does the Andis Cool Care prevent Rust? Should you put some on before and after each use?
@karlosblends5 жыл бұрын
joecool97 I do but its always good to open up your clippers and clean them with blade wash
@devin1820ify2 ай бұрын
Rookie question. Do you oil them before you use it or after
@theforexbully5582 Жыл бұрын
Thanks Brotha decided to clean my clippers about two year ago couldnt figure out why my blades werent cutting right (I cut my own hair) now after watching your video it was the metal piece between the two blades was not aligned properly... And now I have 0 Gap :D
@AskAW2 жыл бұрын
This worked for me. My lining is nice and crispy.
@karlosblends2 жыл бұрын
Glad it did brotha !
@Ivan_Sj4084 жыл бұрын
Hey bro my blade is kinda to the left , what can I do to center it ? I unscrewed the nut on the bottom part ( the part with the nut in the middle and two rivers on the side ) but it won’t move at all. Please let me know thanks a lot !
@keilongeorge602724 күн бұрын
How did you remove the grey plastic part. Did you shave it down?
@karlosblends24 күн бұрын
@@keilongeorge6027 I cut it with a dremel or saw
@DjSkyattack4 жыл бұрын
so by default , what measure is the the t outliner come in factory mode?
@karlosblends4 жыл бұрын
dick lavy don’t know the exact measurement between the cutting and stationary blades but it’s not as close as zero gapped so you have less of a risk of cutting someone the whole idea behind zero gapping is making them cut a little closer which means you will get sharper lines
@DjSkyattack4 жыл бұрын
@@karlosblends even than the blade is still sharp that it cuts...I guess it's why they call them t outliners,which are to outline sharp lines...and thanks for the answer,I was curious to know the exact measure. ..THanks.
@elmini6024 жыл бұрын
Thx man this was helpful 👍👍
@willieguns6 жыл бұрын
Didnt look like you tilted the blade much does that cut too close or is it just right? I was taught to fill mines further back.
@karlosblends6 жыл бұрын
william gunnings I get what you’re saying man, it actually has been working just fine ever since it won’t cut the client bro thanks for commenting !
@blackham7 Жыл бұрын
What if you don't want it to be zero gapped and you want to leave it at the default factory settings?
@karlosblends Жыл бұрын
Just leave a small gap make sure there’s some space between the cutting and stationary blade
@devin1820ify2 ай бұрын
Mine ain't come with that little brush
@abuk354010 ай бұрын
What’s the tool
@karlosblends2 ай бұрын
Andis t outliner
@justmyopinion845 жыл бұрын
What does Zero Gap mean?
@karlosblends5 жыл бұрын
Just My Opinion Reviews the cutting blade and the stationary blade are at the same level when the lever is closed
@BonjourChristian2 ай бұрын
Background music is awful man.....
@karlosblends2 ай бұрын
Sorry made this video 6 years ago I wouldn’t have it that loud now 🤦🏽♂️