How To Clean Your Watch (Polish + Remove Scratches)

[@WatchTWM]

Hey guys, As some of you have mentioned, it's most definitley recommend to wear gloves while applying the cape cod, unless you're a savage like me. All the best, TWM gang!

[@buzzufy]

The watch looks amazing after the cleaning and polishing. Thanks for sharing 👏👌

[@WatchTWM]

Thanks for watching!

[@markdegaute2125]

Guys, don't be afraid as this is easier than you think. Ideally remove the watch head from the strap (I suggest Bergeon strap tool). Use electrical tape to mask the areas you are not refinishing. Use green pad for brushed steel. Use Peek applied to a microfibre for the polished steel (or Brasso wadding works) - it's like T Cut. WEAR GLOVES, especially if you have sensitive skin. Then a nice soapy clean either in the sink or take a shower with it. Be careful with any watches with less than 100M WR and check your screw down crown before you start.

[@WatchTWM]

Awesome points in there Mark, and I can vouch for Bergeron tools, they're the very best I've used.

[@Zotrax1946]

👌🏻👍🏻

[@perfectiom3718]

If you want a satin finished back, try this method of knife making where you gave a rough brushes and finish with polishing pad. That'll leave satin finish and feel more expensive than brushed finish

[@perfectiom3718]

Damn my english is so broken. Sorry about that

[@rickstard73]

Your English is great 😊 What knife making finish do you recommend exactly?

[@mathiasgreen6506]

Great video 👍

[@skywind007]

Thanks. Congrats on 1k subscribers.

[@WatchTWM]

All thanks to you my man

[@openheartedwarrior2971]

Will this help clean anodized titanium?

[@zillsburyy1]

3M scotchbrite takes out the scratches on my OMEGA seamaster professional 2264.50.00 clasp

[@WatchTWM]

Oh definitley, that's another good alternative ^, thanks for sharing the tip!

[@RezaStallone]

Will this remove a noticeable pit on my SPB121 :( ?

[@willsmeg1967]

Good job 👍🏼 I normally cut the cloth in quarters as it’ll last longer, also it’s advised to wear surgical gloves as there’s high toxicity in the cape cod . But your watch is well polished 👍🏼👍🏼👍🏼

[@WatchTWM]

Thanks Karl! Funny you mentioned that because I normally chop it up too, but I definitley should be wearing some gloves though, if I stop posting you'll know it's because I died from the cape cod 😂

[@willsmeg1967]

Please keep posted 😆 👍🏼 I’ve just subscribed 👍🏼👍🏼

[@WatchTWM]

Welcome to the channel Karl!

[@willsmeg1967]

@@WatchTWM Thank you 🙏🏼

[@spinachbroccoli3276]

I just noticed i lost the crown of mine, do shops get that repaired and replaced?

[@WatchTWM]

Did you lose your crown of the actual movement or of the compass rose?

[@spinachbroccoli3276]

idk the exact term but its main turning knob to set the time

[@spinachbroccoli3276]

a hallow stick that I assume holding it sticks out tho

[@WatchTWM]

@@spinachbroccoli3276 You had it right haha I was just wondering because this specific watch has 2, one for the time and one to turn a compass dial. Either way they are definitely replaceable , shouldn’t be more than about $100-$150 but the price varies with brand obviously

[@Zotrax1946]

0:49 the Sarb017 is 20bar WR.. Thanks for the tutorial!

[@owaisshaikh4377]

If the polish paper turn dark greenish than it means your metal is steel and not any other metal because the wax in the polish react with steels bracelet. If its any other metal it wont react.

[@WatchTWM]

Good to know, thanks for sharing Owais!

[@manxology]

Very nice. Thank you.

[@randallhill7979]

Thank you, this is good to know

[@WatchTWM]

No problem Randall thanks for watching 👍

[@SF-313]

Please give one review video about this watch ♥️

[@J20666]

I concern you have scratched the mineral crystal of the Seiko watch already.

[@mabaker6123]

Is there a way to bring back the brush finishing?😂

[@tommynguyen2612]

Thank you very much!

[@julesp7939]

This really helped with my asmr addiction. Thank you🤣

[@WatchTWM]

Hahha just wait until we start unboxing some new watches

[@marco23708]

How about repairing dent on steel bracelet?

[@WatchTWM]

Dents give some character and every dent is a story! A little polish here and there is okay in my opinion. Eventually if you want to you can just replace the bracelet but unfortunately Dents are usually deep enough that you can’t easily fix them

[@SF-313]

What's the price of that watch 🤔?

[@WatchTWM]

It’s a Seiko Alpinist SARB017. It’s discontinued but I bought it for 400USD. They’re probably more expensive now though but absolutely stunning watch

[@SF-313]

@@WatchTWMLooking so beautiful and luxury ♥️

[@Texasmilitarydepartmentvid9654]

Don't dip your watch in water even though it's stainless steel it might pit the bracelet.

[@WatchTWM]

Haven’t had any pitting at all on any of my watches, and I frequently get them wet. Where do you get this concern from?

[@akamran01]

YOU HIT 1000 SUBSCRIBERS :)

[@WatchTWM]

AND YOU BEEN THERE SINCE DAY 1 BRO

[@ruip72]

Stop watching the moment you didn't remove the bracelet from the watch 👎

[@WatchTWM]

Couldn't find my spring bar tool that day lol 🤷‍♂️

[@bobbywarren6583]

I don't think so !

[@Samuelfish2k]

Man that watch is looking rough & dull.

[@WatchTWM]

Hell yeah man just like a watch that’s seen the world should haha

[@Samuelfish2k]

@@WatchTWM My 15yr. old Bulova is looking rough & grimy right now, which is why I’m watching these videos getting ready to clean it. Lol

[@WatchTWM]

@@Samuelfish2k haha glad it helped my man, let’s get that baby looking fresh again 👊

[@gangster1840]

It's fack

[@5hittyradio]

No it's not 😂