How To Clear Your CMOS - BIOS Reset Tutorial

[@archiiz3791]

you are the all time goat, second to none, computer genie completely fixed my computer well earned sub

[@SuspiciousAra]

If you on a tight schedule, just pop out the CMOS battery and use the battery's body to short the +- pins on the motherboard for a few seconds.

[@oldcatmeow]

Thank you very much, this saved my life

[@yohasan9590]

HOW DO I TAKE PUT THE CMOS BATTERY

[@BlackMask10472]

I'm suffering in pain, I wish I never changed my BIOS settings, I have decided to take my own life.

[@itz_karmelka2587]

@@BlackMask10472same 😭

[@FaheemZul]

Concise and direct video. Saved me a repair cost. Liked and Subbed!

[@frankyguitar1241]

I was wondering where the hell was the Jumper to reset, you saved me tons of time, cheers mate!

[@FiveMissiles]

it worked! yesss!! on asus mobo the pins are labelled “crltc”… it took a minute to boot up but it did after a minute or so. thank you for this tutorial

[@UserAme99]

Jack, do I need to uplug my gpu when resetting the CMOS using a flathead?

[@retiredfnsweat]

so helpful, I tried to change my BIOS settings for Core Control as my CPU cores were stuck at 2, changing the system configuration didn't work, so I booted into BIOS and changed something that I thought broke my pc as it wouldn't boot. Found this video and my cores are now at 6 instead of 2 and booted my PC normally

[@59kensou]

I LOVE YOU !!!! It was very difficult to find this way ! Thank you very very much !

[@TheSupercat91]

Short sweet and to the point

[@trysiema6488]

Changed fclk frq which said nah f off to my pc so glad I found this video!!

[@Cjayfn-bb4tk]

Thank you bro omg it acc worked I was so annoyed that I couldn’t use my pc

[@eljizzo]

this worked!! you’re a lifesaver, thank you so much 😄

[@Alphax8]

Worked for me on a MSI b650 Tomahawk with a regular screwdriver

[@pherenchi]

Did u get the issue where your 3.0 USB ports arent working?

[@Alphax8]

@@pherenchi it's what i thought was happening too, because my keyboard mouse and screen were non responsive. But it's actually just the biome not working. When you reset your motherboard ans can acces the biome settings again, find a youtube video on how to boot windows for MSI motherboards and then you'll be sorted

[@leetmine]

@@Alphax8it ain’t working for me at all

[@Dailyrider94]

This one been gaving me allot of troubles. Did my first cmos reset. Hopefully it saves my changes with future bios updates.

[@clorox821]

Have a b650 wifi ii board and it worked without having to remove the battery thanks

[@villaman4818]

Bloody marvellous. I love the internet for knowledge share. Many thanks. I had an MSI 97 and this worked a treat.

[@hernanarenas1917]

great video, works super well. thank you brother

[@partly_sunny1955]

Been having so many issues with my b550 motherboard I have to sit 1hour tryna reset the damn thing it’s like a car

[@Spldernutz]

Did this work i got b55 also

[@Spldernutz]

I need to know what you shorted it with

[@user-nf5uc9nh6w]

@@SpldernutzI’m sure you got it sorted but you just use a screwdriver or any bit of metal so it connects both pins for 10 seconds and it’ll reset the cmos

[@myheaven2626]

Hello even i clear the cmos and replace new battery. It says press f1 to run set up. So i press f1 enter bios setting and add the date and time, then safe by pressing the f10 key. My main issue is that when i unplug the power cord, i still get same issue. And the date and time change to 00:00hrs. Can you guide me what should i do. It would be grateful if you could help me out please. Thanks in advance. 🙏

[@ÁdámSomogyi-o7o]

Thank you! It worked for me!

[@Jack-yj8vg]

Legend thanks for the vid!

[@Aaronemmanuel-27]

Its weird because even after taking off the power cord shorting jbat1 and even taking out the cmos, my motherboard doesnt seem to want to start in dual channel mode.

[@tampabaymonkey6604]

I know this is an old video, but do you mind sharing which case you were using 0:24? I have been looking for one that size but that is the only case that seems to a decent sized fan. Thanks 🐒

[@campos8999]

That is not a case

[@MonadoSaga94]

That's a power supply...

[@saurabhguha1309]

It worked!!! Thanks.

[@kriscleland6655]

I have an MSI X470 Gaming Plus MAX, and I tried to manually boost my ram mhz from 3200mhz to 3600mhz as that is the maximum that it can go to (according to corsair vengeance pro which was obviously wrong or something idk) after I did that I saved in the BIOS and restarted PC (didnt build this PC my friends sister did and I have never built a PC before so when this happened I was SCARED, and deathly anxious, looked up on reddit that all I needed to do was clear my cmos, didnt know what that meant to so I dived deeper into the internet) and it was black, just black, and apart of my motherboard right below the RAM was constantly red, I was like, oh no, I broke my PC (lol), anyway the type of motherboard I have actually has a button on it at the very bottom near the rear end called CMOS_2 and I clicked that for what seemed like a lifetime, just so I done it correctly, after that everything was fine, but then I went into task manager and saw that my ram speeds were down to like just over 2200 mhz, so I went back into BIOS and just put on game mode and xmp profile 1... and it went back to 3200mhz. I honestly think some component companies lie about how much you can push certain hardware, or maybe it was because I have a semi - modular PSU and the CPU may have been taking up most of the power so that the RAM couldnt go to 3600mhz as advertised on corsair ram. I never needed to do what you said in the video, just a button and solved. If anyone has a MSI X470 Gaming Plus MAX and needs help finding this button then I will be glad to help you, its much easier than doing it this way.

[@HR6800mkv]

It's work in my motherboard msi b650-s wifi

[@wasimanwar4245]

How dose it work in a laptop. I have located the chip, should I deconnect the battery power also?

[@ClaudyMarley]

Hi, i have a question. I have mini version of motherboard. I dont have power button like u. Also when I try to locate Jumper I need to také out procesor thermal Block. Bcs He cover all size of motherboard. And I Also start up pc for denized every spot of energii from PC. So my Question is. Iam need to star up PC And then turn off And unplug the power cable or its okey when i Just plug power cable And unplug for the Jumper reset? Sorry my english is bad I mean, I need some power in case when I need to reset bios with Jumper?

[@alex.hallam]

worked thanks

[@jeanmarcchauveau-u4q]

Hello and thank you for this video. I'm looking to do the same thing on a Mortar M450 Max. And I don't know how to do it! Can you help me please..?

[@idcfool2124]

this helped me so much thxyou

[@tjab797]

Thank you so much!!!

[@wildfire1146]

Tried this, got stuck in a boot loop

[@StayOut_Esc]

Hi, i have the pro h610mg but i can't find the JBAT1..

[@eliesah86]

Hi, Thanks for the Video. It doesn’t work for me. I‘m still getting a black screen. I tried all ports in the motherboard and graphic card for the screens. All the fans are working and multiple LED‘s are working on the Motherboard but I‘m getting a black screen. Can somebody help me Please. It‘s a MSI B350M Mortar. Thank you

[@bjornhegel]

IT WORKED NOw..! Had to change output to hdmi 1. that seems to be the default output on my 1080

[@gurugamer8632]

After 2 years of my using my new gaming PC. Mother board Asus Darkhero VIII . I got error message when booting: Please enter setup to recover BIOS settings. Press F1 to run Setup. I have replaced the CMOS battery with new one still get this problem. If I leave my computer unplugged for 4 weeks I loose the system date and time after changing the batttery is this normal? How can I fix this issue?

[@pistopitpit]

Sometimes it is not resetting but actual battery replacement.

[@bjornhegel]

it didnt work.. I have no clue what to do now.. no bios no windows just black screen. plz help

[@xerotivi]

did you find a solution

[@bjornhegel]

Yes. I changed video output from dpn1 to hdmi 1. It seems that this was my bios default output setting

[@xerotivi]

@@bjornhegel I somehow made it work but now I do not get any mobo error nor display. I suspect there is a problem with the psu or circuit

[@chesterserrano]

Thank you! I almost sent my pc for repairs😅

[@kerryfreudenthaler2986]

Done this for 2 days mothomg i have a z690 carbin wifi motherboard i oc ram by only q00 more them its rated

[@dreamleaf6784]

Now i did this and my screen is black. Its plugged into hdmi to hdmi, i also tried usb to a hub to hdmi

[@dreamleaf6784]

Any ideas to get the screen to show

[@triplelll7861]

I did it and still no display and i csnt use my keybord to open enything i have m5a97 r 2.0

[@johndough6518]

Same, but i have an MSI b250M bazooka

[@knusperkeks2748]

Thank you.

[@Top3Entertainment]

You messed up in step one

[@PCJack]

Wut?

[@Top3Entertainment]

@@PCJack it should be buy a motherboard

[@PCJack]

@@Top3Entertainment Damn, well that's best way of clearing CMOS I guess.

[@Top3Entertainment]

@@PCJack can't clear a CMOS if there is no CMOS

[@PCJack]

@@Top3Entertainment Big brain time.

[@michag2655]

not working.

[@luckyman1324]

short but sweat

[@PCJack]

Cheers mate! 👍

[@Yuzamhd]

Thank u

[@MrHeHim]

If you don't have a Clear CMOS button on the back of your MSI I/O panel, they also have a "JBAT" jumper pins on the inside at the bottom Back 10+ years ago when I would do overclocking I would leave the CMOS battery out until I got a perfectly stable OC. If it hung up, all I needed to do was flip the power switch and hold down the power button to reset it. Then pop it back in when I was done 👍

[@mentegrity101]

Bro its not working help

[@kriscleland6655]

What MOBO do you have? If you are still having issues I can help if you have an MSI x470

[@LiMitZplus]

A whole row of usb ports stoped working and this fixed it

[@anthonyloomis9780]

i love you

[@r.razamhd]

This game is a disgrace to the arkam series