✓ How to Connect Two Routers on one Home Network Wireless 2018

How to Connect Two Routers on one Home Network Wireless 2018 or connecting multiple routers How to connect two routers wirelessly, or how to configure two router in one network | increase extend WiFi range #ConnectRouters #WiFiRouter #LocalGuyTech #WiFiNetwork
📺🔔 Subscribe for more tech videos: www.youtube.co...
🔴Don't Forget to Like and Share Videos With Friends: • ✓ How to Connect Two R...
✅You Can Buy Best Seller WiFi Router From Below link :-
🟩TP-Link Archer C6 Gigabit MU-MIMO Wireless Router, Dual Band 1200 Mbps Wi-Fi Speed
amzn.to/2MP7pkA
🟩D-Link DIR-615 Wireless-N300 Router
amzn.to/2AYFGv8
🟩TP-Link TL-WR845N 300Mbps Wireless-N Router
amzn.to/3e19S7u
🟩TP-Link Archer C20 AC750 Wireless Dual Band Router
amzn.to/3fgbNoX
🟩TP-Link Archer C60 AC1350 Dual Band
amzn.to/37oEYTV
🟩TP-Link TL-WR841N 300Mbps Wireless N
amzn.to/2MUqSQO
🟩TP-LINK TL-WR840N 300Mbps Wireless N Router
amzn.to/3e1aoSY
🟩TP-Link Archer C60 AC1350 Dual
amzn.to/3fgcLl5
🎬 Recommended Video Must Watch :
➡️Wireless Distribution System WDS Bridge on Flash DD WRT Router | Extend Increase Range WiFi Repeater • ✓Wireless Distribution...
➡️Turn WiFi Router Into WiFi Access Point | Extend WiFi Network Range • Router as WiFi Access ...
➡️ Router Mode How to connect two routers to Increase or Extend Home WiFi Range | WiFi Repeater WiFi Extender • ✓ How to connect two r...
➡️Router Bridge Mode Improve Increase WiFi Signal Strength | TPLink TL WR841N Router as Repeater Range Extender • ✓ Improve Increase WiF...
➡️Router Bridge Mode Range Extender How to Connect / Bridge Two Router Wirelessly Using WDS Wireless Distribution System Settings • How to Connect / Bridg...
➡️Router Client Mode How to Access WiFi using Ethernet Port or LAN Port | WiFi to Wired • How to Access WiFi usi...
➡️How to Connect Two Routers Wireless using WDS Wireless Distribution System Bridge | Increase WiFi • ✓ How to Connect Two R...
➡️How to increase extend Home WiFi Network Range | WiFi Repeater Configuration | WPS Button • How to increase extend...
➡️How to Connect Two Routers on one Home Network Wireless 2018 • ✓ How to Connect Two R...
➡️How to Share WIFI CONNECTED PHONE'S INTERNET to other Android Phone • ✓ How to Share WIFI CO...
➡️How To Block WiFi Speed of Other Users on your Network | TP Link WiFi Router Settings
• How To Block WiFi Spe...
➡️How to Secure Home WiFi Network | Protect WiFi • How to Secure Home WiF...
➡️Configure TPLink WPA Enterprise with FreeRadius Server to authenticate Home WiFi Users
• ✓ Configure TPLink WPA...
➡️How to Create and Host Website using IIS
• How to Create and Host...
➡️How To Automatically Reboot WiFi Router | Schedule Auto Restart of WiFi router
• How To Automatically R...
➡️Convert Old Laptop Desktop into NAS Network Attached Storage Install Synology DSM DiskStationManager • Convert Old Laptop Des...
🎬 Recommended Video Playlist :
✅How To Connect Two Routers • How To Connect Two Rou...
✅Best Technology Videos by LocalGuy • Best Technology Videos...
✅Install Android Custom ROM • Install Android Custom...
✅Vehicle Security | Car & Bike • Vehicle Security | Car...
✅How to connect Canon iR3300 Printer to WiFi Network | Canon iR3300 Scanner and Printer,Scan to PDF,ScanGear • How to connect Canon i...
✅TP-Link Home WiFi Security • TP-Link Home WiFi Secu...
✅Raspberry Pi Projects • Raspberry Pi Projects
✅Cisco CCNA CCNP CCIE LAB Practice • 200-120 CCNA Learn | P...
📺🔔if you have not subscribed to my channel then please subscribe first :- www.youtube.co...
👤Connect with me on Social Media @LocalGuyTech
Facebook@LocalGuyTech- / localguytech
Twitter@LocalGuyTech - / localguytech
Instagram@LocalGuyTech - / localguytech
✅Disclaimer: All videos on my channel are subject to copyright.if you have any queries,suggestions or found any error /mistake regarding tutorial please notify me in the comment section.i will answer all your questions / queries.
some of the links are third party affiliates.
Thanks.
✅Local Guy
A KZbin Channel for Technology,Internet,IT,Software,Programming,Developer,Linux,Networking,Computer,Android,Iphone,iOS,IT Analyst,Data Analyst

[@gigusho]

You know what. You are a life savior. Out of all the videos out there you were the only one abe to help me

[@tiyowprasetyo]

yes, and he didn't waste much time! this vid is only 4 minutes. i'm subscribing to local guy channel

[@educrypt1659]

@@tiyowprasetyo 00000000000000000000000000000000000000000000

[@ephraimrocks]

Brilliant! I was struggling how to manage this extender option without buying new wireless router, or any new router. I had one router provided by Act and used that to connect my airtel xtreme router. It works seamless with good speed around 40 M's Great Job!

[@ephraimrocks]

Hello Local Guy! I successfully bridge two routers. My main router is from Airtel Xtreme and I am bridging with Act Router (Not subscribed with Act at the moment) The connection is not sustainable for more than 12 hours. After 12 hours I need to redo the steps as you explained on Repeater. My Router is TP Link Archer C5 Suggest on how to manage this?

[@rain-sg9gz]

Thanks bro, it worked very well for me. As someone who isn't that knowledgeable about tech, it was a great help. I was able to connect both routers wirelessly

[@localguy]

Thanks

[@herminialee5806]

I like the way you explain, very clear but the only thing these ads keep bothering but definitely I love your channel.

[@justforthetv]

Lol then buy KZbin Red, no ads whatsoever

[@mashingwachine824]

Do I need cables to connect them? plus, What if my main router isn't a WDS will it still work?

[@JaydenCurry192]

Myles 124 lmaooo

[@Decatei]

This worked beautifully for me. Thank you so much!

[@subhashk7043]

Excellent brother 👍👍 Just tried this and succeeded Everyone try this from your mobile phone and not with laptop and computer. 👍

[@gajendras1]

Thank you for providing solution ! It's worked for me. Really Appreciate.

[@sadiasaleem27]

Tried and it worked!!! satisfied :)

[@samuellazarus1107]

Brilliant. Worked like a charm. You have a new subscriber. Thank you.

[@localguy]

Thanks

[@vaasant10]

I did all the settings you tried.... Is it possible to use the Old Router as Wireless router extender without LAN Cable. Old Router Model Huawai HG630a

[@AJMUTHU]

Super easy and helpful, thanks for sharing both wired and wireless ways of extending. But just one basic question, will there be a difference in speed by extending the router through ethernet vs wireless? If yes, do you recommend ethernet way?

[@ephraimrocks]

You should get good range if you keep the extender from main router by 50 meters. I did the same and getting around 40 m's

[@gurjitsingh2239]

The speed will be same but ethernet will be more stable as compared to wifi

[@EliStoqnova-e4s]

such a helpful video!! thank you

[@nihitht762]

Than you so much....I have been looking for this video for so long and the method worked succesfully

[@themusicalsoul7208]

Excellent video brother...One question, After doing this setting ,If we keep two routers at about 30-40 feet distance ( 1st router on ground floor and 2nd router on 2nd floor ) Can it work properly?

[@vaishnavibhandarkar4378]

Is this working?

[@andrendenum1]

Did you have to name it Falcon 4 or can you have the same ssid name for both routers so, in theory, you wouldn't have to change wifi channels as you move from one side of the house (main router) to the other side of the house (extender router) for your cell phone?

[@junaid_qadir]

That's a really fantastic tutorial. Is it possible if we do not connect the internet cable then how will we open the router configuration page?

[@wissamharb5684]

Thanks a lot man! Would the setup stay in case i disconnect the extender router to move it around? Thanks!

[@w0lf314]

thanks champ!

[@ProductionsInferno]

Thank you very much! This is very helpful sir :)

[@Steffiyoso]

works great! thanks for the tutorial

[@localguy]

Thanks!!! Pls Like 👍 & Share. Don’t Forget to Subscribe. 🔔📢 kzbin.info 👤Connect with me on Social Media @LocalGuyTech 📌Facebook@LocalGuyTech ➡ facebook.com/LocalGuyTech 📌Twitter@LocalGuyTech ➡ twitter.com/LocalGuyTech 📌Instagram@LocalGuyTech ➡ instagram.com/LocalGuyTech

[@11.59edits__]

Mene aapka 2 router ko wireless connect karne wala video dekha aur wese hi mene connect bhi kiya ab mujhe 2nd router ko reset karne hai lekin question ❓ ye hai ki jo 1st router hai WAN wo to reset nhi hoga na please reply zarur de.

[@ayoubazim3452]

First rule: never share your MAC adds🗿

[@crkofficial9083]

Do i need to check WDS/bridge in my primary router as well?

[@AkashKatare07]

Thanks a ton.. Hats off man..

[@morganfreeman2068]

Can you do this with any brand WiFi router? Like Vodafone for example?

[@sufyananwer9171]

Thanks bro it works. But the only thing i can’t do is access the settings of the TP-Link router how can i do that?

[@tsolerman]

Is brilliant. Excellent help

[@arundeepakvaladisubramania362]

Thilak Nagarajan after going to this LAN option, I have MAC address- uneditable field, IP address : default IP of router, Subnet mask Mask: Some default options ( along with manual option to enter details), IGMP proxy : Enable. As per your comment i tried changing Subnet mask address as 192.168.0.5 but when system is not accepting saying " bad subnet mask for LAN IP ". Can you please tell me how to proceed further?

[@somnathdas2664]

Please upload tutorial on connecting multiple routers wirelessly to one network

[@horizon7003]

Worked. Thanks a lot

[@Dr_Ali.Aljboury]

But will be same weak if you using wrilessy because the room up stair so the conccreetee still effect the signal.. I think wire much better

[@Nexusof91]

thank you very much...

[@kski9455]

Works GR8.....Thanks!!!

[@arnaudpilon1238]

Working for me a big thank!

[@localguy]

Thanks!!! Pls Like 👍 & Share. Don’t Forget to Subscribe. 🔔📢 kzbin.info 👤Connect with me on Social Media @LocalGuyTech 📌Facebook@LocalGuyTech ➡ facebook.com/LocalGuyTech 📌Twitter@LocalGuyTech ➡ twitter.com/LocalGuyTech 📌Instagram@LocalGuyTech ➡ instagram.com/LocalGuyTech

[@venkypixels]

Thanks Brother. I have done the same, it is connected and working but it is too slow, some times it is getting disconnected from main router. I have observed that the main router channel is changed and that’s why it wasn’t connecting. I did reset and using now but still it is too slow. Main router speed is 60MBPs and the extended router speed is 3mbps. Kindly help to resolve disconnecting issues and speed issues.

[@somjitchakraborty9931]

Super helpful buddy, thanks a ton

[@miridrabeja1381]

thanks, bro your video helped me a lot.

[@KingsukGhosh]

is it possible to connect two router of different brand in this way ? my main router is Tenda AC10 and the old one is TP-Link 841N

[@fulltrottle8856]

Hai sir, can you help me?? After follow all the steps in the video its work fine.. after few hour my wifi setting said ‘no internet network’.. i have to the setup all over again.. then i notice the channel from main router keeps chaging.. how to fix this?

[@Jeanuwine]

Remove it from auto channel select and manually select a channel

[@rupamchakraborty8275]

Thank You

[@Fullrusher]

So now you can just put this second router in the down room ? Sorry if you said this I have a hard time with Network stuff

[@localguy]

Put extender router at such a distance , that it can receive sufficient signal strength. Thanks.

[@zoronow267]

If I want to disconnect second router from the main router.......then I should make (reset)to second router?

[@kannappangopalan8160]

DEAR BROTHER , KINDLY CLARIFY THIS DOUBT --> WHEN YOU ARE CONNECTING 2 ROUTERS IT HAS BEEN MENTIONED THAT YOU HAVE TO USE ONLY CROSS OVER CABLE AND NOT STRAIGHT THROUGH CABLE ; BUT WHEN CONNECTING 2 FLOORS YOU NEED A LENGTHY CROSS OVER CABLE WHICH IS NOT AVAILABLE IN THE MARKET ,ONLY STRAIGHT THROUGH CABLES ARE AVAILABLE IN SEVERAL METERS .PLEASE ANSWER

[@localguy]

Nowadays routers are auto mdi/mdi no need to worry

[@ajeldiocampo]

Hi po pede po Epon Uno ang main router tas Tp link naman with WiSP ang 2nd Router po?

[@shahyar05]

i guess that my old router must have this feature to extend my wifi router range, am i correct?

[@LalwaBhaiTales]

Yes

[@zoronow267]

If electricity off from the second router.....internet will be off from the main router?

[@fasalkoodathai1770]

nice work manh.... i like it

[@axeldaniel648]

can extended new router be used in pc as ethernet?

[@localguy]

Yes

[@keithwintz1305]

I have a Linksys ac100 I’m trying to bridge my two routers together but it has a lot of different stuff can someone help me

[@kuntal.chanda]

Can i connect two different router using #WDS DIGISOL TO TP LINK

[@localguy]

Yes.If router supports wds.

[@subha517]

very informative...but i have a very big doubt...i have one D-link router and another is TP link and both of them have the same gateway 193.168.0.1 now how i configure my 2nd router as because my root router is already connected...pls reply

[@localguy]

On second router default gateway is nothing but ip address of root router.

[@ketanmodi1132]

Please help me for Asus RT-N12+ 300mbps router to be connected wirelessly to Jio fiber router (main)

[@beautifulworld1491]

I have done it successfully, however sometimes while connecting it shows as "no ip allocation", how can I solve this problem

[@localguy]

Where On router ? Or mobile devices?

[@sachinpatil-zv3ep]

thank u very much air thanku thanku i litterly sufring from this problem ur video helped me lot 😘😘😘

[@localguy]

Thanks!!! Pls Like 👍 & Share. Don’t Forget to Subscribe. 🔔📢 kzbin.info 👤Connect with me on Social Media @LocalGuyTech 📌Facebook@LocalGuyTech ➡ facebook.com/LocalGuyTech 📌Twitter@LocalGuyTech ➡ twitter.com/LocalGuyTech 📌Instagram@LocalGuyTech ➡ instagram.com/LocalGuyTech

[@laylasands7435]

It worked!!! Tyvm

[@FzGamer4u]

Awesome Bro

[@venkypixels]

Also Am not able to login into the extended/ second wifi router through browser.

[@divyasp17]

Sir, I have TP-Link Archer C1200 Dual Band Gigabit Wireless Cable Router but I couldn't find WDS, Please help

[@Random131_]

Hello, should the routers be connected with an ethernet cable? And will a Wireless Access Point achieve the same effect and speed as a router ? Thanks in advance

[@localguy]

For good speed Wireless Link between two routers must be strong as wireless signal degraded by obstacles.to achieve strong link between routers use other medium such as wired Ethernet/Fibre.watch how to connect two routers using wired connection kzbin.info/www/bejne/gafbpIitltKNnck

[@waleedali4784]

after that. i want to use lan with that router, is that possible?

[@mithson]

Does the Data accessed from second router will be accessible to isp? & will isp came to know that second router is connected to main router?

[@localguy]

Nothing to do with isp.

[@catinthebag1437]

Do I need to plug into wan with the new router?

[@onlineuniversity3718]

I am doing the exact steps. Router is getting connected too after bridging but internet is not coming up. Also main router internet started disconnecting. Please guide.

[@omrajput9766]

Bhai yrr jb tmhare secondary router me LAN ka connection hi nhi h to login page kaise khulega

[@localguy]

✅Buy Best Seller WiFi Router From Below link :- 🟩TP-Link TL-WR845N 300Mbps Wireless-N Router amzn.to/3e19S7u 🟩D-Link DIR-615 Wireless-N300 Router (Not a Modem) amzn.to/30mCCC7 🟩TP-Link TL-WR841N 300Mbps Wireless N amzn.to/2MUqSQO 🟩TP-LINK TL-WR840N 300Mbps Wireless N Router amzn.to/3e1aoSY 🟩TP-Link Archer C20 AC750 Wireless Dual Band Router amzn.to/3fgbNoX 🟩TP-Link Archer C6 Gigabit MU-MIMO Wireless Router, Dual Band 1200 Mbps Wi-Fi Speed amzn.to/2MP7pkA 🟩Tenda AC10 1200Mbps Wireless Smart Dual-Band Gigabit WiFi Router amzn.to/3fCeS3p 🟩D-Link DIR-841 - AC1200 MU-MIMO Wi-Fi Gigabit Router with Fast Ethernet LAN Ports amzn.to/3fxDbiN 🟩TP-Link Archer C50 AC1200 Dual Band Wireless Cable Router, Wi-Fi Speed Up to 867 Mbps/5 GHz + 300 Mbps/2.4 GHz, Supports Parental Control, Guest Wi-Fi, VPN amzn.to/3eGJkI1 🟩TP-Link TL-WR820N 300 Mbps Speed Wireless WiFi Router, Easy Setup, IPv6 Compatible, Supports Parent Control, Guest Network, Multi-Mode Wi-Fi Router amzn.to/2ZGeCLf 🟩TP-LINK TL-WR840N 300Mbps Wireless N Router (Not a Modem) amzn.to/30gD0Cc 🟩TP-LINK TL-WR940N Wireless-N450 Home Router (Not a Modem) amzn.to/397jUSI Friends!!! Pls Like 👍 & Share this video with your friends. Don’t Forget to Subscribe.it's 🆓💯 🔔📢 kzbin.info Take Care.😀 Lots of Love 💗💗💗 👤Connect with me on Social Media @LocalGuyTech 📌Facebook@LocalGuyTech ➡ facebook.com/LocalGuyTech 📌Twitter@LocalGuyTech ➡ twitter.com/LocalGuyTech 📌Instagram@LocalGuyTech ➡ instagram.com/LocalGuyTech

[@jade007z]

Thank you! your really informative, I have a Question: I have a Netgear Nighthawk router that I want to connect to a Fios Router as a Access Point, and in the Nighthawk router settings it has AP mode (Access Point mode) , Do I just turn it on enable the AP mode and that's it?? or do I need to do something else in the settings? Thank you.

[@temx7526]

jade007z did it work?

[@jade007z]

@@temx7526 I have not tried it yet, I will in 2 weeks from now

[@slbandre]

@@jade007z What´s your result? I have a Nighthawk router and have the same problem.

[@jade007z]

@@slbandre well let you as soon as I do it, have you done it?

[@localguy]

Thanks!!! Pls Like 👍 & Share. Don’t Forget to Subscribe. 🔔📢 kzbin.info 👤Connect with me on Social Media @LocalGuyTech 📌Facebook@LocalGuyTech ➡ facebook.com/LocalGuyTech 📌Twitter@LocalGuyTech ➡ twitter.com/LocalGuyTech 📌Instagram@LocalGuyTech ➡ instagram.com/LocalGuyTech

[@chromcierna]

Can i connect from the second router my PC with lan cable ?

[@alemustafa2110]

i did as you did in video but my router is not connecting to mobile phones it only connects with my laptop from which i did all the setting

[@janbran20]

I'm confused, i followed steps but had to plug Ethernet cable to both routers for the intent to work using the second router

[@manishmokal1894]

A big thanks..

[@localguy]

Thanks!!! Pls Like 👍 & Share. Don’t Forget to Subscribe. 🔔📢 kzbin.info 👤Connect with me on Social Media @LocalGuyTech 📌Facebook@LocalGuyTech ➡ facebook.com/LocalGuyTech 📌Twitter@LocalGuyTech ➡ twitter.com/LocalGuyTech 📌Instagram@LocalGuyTech ➡ instagram.com/LocalGuyTech

[@artlantic_music]

I disabled the dhcp and changed the ip address and now I don't have access to my router settings. Do you have any idea how i solve this? thank you for your time.

[@localguy]

connect lan cable from pc to router's Lan port and access the router settings. Or reset the router.

[@w2msa]

Thanks for the video. I followed your instructions and it works. How would I log back into this router/extender now that they're using the same ip address?

[@localguy]

ip address is unique for every device.find ip address of extender router by login in root router and check connected device list. On browser Enter the ip address of extender router.

[@TheCrazeedoctor]

I am able to extend but how to revert this config as reset is not working now and i am not able to login to second router

[@maheshvfxartist]

Thanks for this video 👍🏼

[@shoppingwhopping]

How to connect with same user id on both. I need to connect with second to extend

[@kristofferikm]

Can i still use the Lan ports on a wds enabled router?

[@eternaltraphd9584]

I have merged the router but when tha source router and destination router was restarted, the destination router was unable to make bridge and showing error issue in ip assignment and was not connecting so i can make bridge again.....

[@princechughtai6019]

I did exactly what you did but after the router is restart its not connecting and say no internet access and just don't connect. main router is connect in another room and second router is in another room and no ethernet cable is connected please help

[@umangpatel3811]

mera to ho gaya success

[@umangpatel3811]

but speed getting half of half

[@sy7692]

Same for me no internet access

[@ThilaknagarajanMendax]

HI Prince, I have faced the same issue, to fix this login into Router with and navigate to the Network->LAN and enter the IP address as getway IP and change the subnet mask. ex:192.168.1.5.

[@almir9950]

Thilak Nagarajan Thank you so much, changing the getaway IP fixed it for me. You are a legend

[@anirudh658]

Is it possible from DSL to DSL modem ?

[@Arshad74u]

can this be done with two different type of router like from different brand and different interface like adsl/ethernet port

[@rajpurohit2501]

Does this cause ip address conflict?

[@vishal6329]

site preference is changed. can you tell how to setup with new preferences on the site 192.168.0.1

[@SaddamHussain-nd7pp]

But during the setup you used password time0000 then how did you get connected by typing different password

[@AmritSingh-ot2qt]

I have one tp link modem+router and one netgear modem+router. I want to increase the range of my wifi wirelessly. Can I use my netgear to increase the range and if yes then how?? Thank you.

[@localguy]

If there is wps button on netgear router then yes.

[@AmritSingh-ot2qt]

@@localguy Thank you for replying. I did ,but nothing happens. Both have wps and different ip address. Thank you.

[@sanskrutimore24]

If I have a iball baton router and a archer c6 can we bridge it.

[@localguy]

yes.change the operation mode to bridge mode in iball router

[@Jakelens]

I did it but now i am having “ip address not found” issues. Please help

[@joshitoshi9835]

i have two dsl wifi routers and there is no button for survery, i want to wirelessly connect them to extend wifi range, but when i enable bridge mode on secondary router it shows fields to enter mac address only, so am i suppose to enter mac address of the main router here? and what next?

[@localguy]

try entering mac address of root/primary router.

[@joshitoshi9835]

@@localguy didnt help

[@muhamadafiqezrie5270]

On the wan type,which one should i choose?ppoe?

[@localguy]

on primary router.it depends on your service provider.

[@rudreshgorsiya2361]

main router tenda ka hai or second router binatone ka hai survey wale option se ho nahi raha hai

[@arundeepakvaladisubramania362]

I followed all the steps which you told in the video, but still it says connected, No internet! You said any router can help.. but it's not working for me

[@train4905]

Exelkent😊

[@localguy]

Thanks

[@kuntal.chanda]

Connect wds my primary router is digisol... What router buy digisol or tp link

[@sajibdas9646]

The router to router connection no longer works without wire. Please, show us new method.

[@psychometry544]

Hi, is it possible to set the 2nd router to 5 ghz band? Or do I need to set both routers to 2.4 ghz band? My main router is 2.4 ghz and I want to add a wireless 5 ghz band router. Our home is small so I wonder if it will work.

[@skandakumar5456]

Sir it getting stuck at obtaining ip address

[@skandakumar5456]

It is not connecting

[@ErfanShiran]

It keeps disconnecting what should i do

[@ankitsrivastava7880]

Do we need to enable wds in both router?

[@localguy]

No.only in extender router

[@ankitsrivastava7880]

@@localguy the what can be reason of loading internet all together?? Any idea

[@michaelmccrsytal3843]

Does a seconded router cost extra to network monthly bill ?

[@localguy]

Not at all :)

[@michaelmccrsytal3843]

local guy thanks

[@kenthharvey]

how about PLDT?