How To Correctly Set the Deck Wheels on a Riding Lawn Mower Tractor

  Рет қаралды 378,182

Steve's Small Engine Saloon

Steve's Small Engine Saloon

Күн бұрын

Пікірлер: 521
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Click here for new wheels---- amzn.to/2Qy7VYv Click here for my website--- www.stevessmallenginesaloon.com/ Click here for my Parts and Tools Store---- www.amazon.com/shop/stevessmallenginesaloon
@dmullinax1000
@dmullinax1000 9 ай бұрын
I just bought my first riding mower, a John Deere S130. I'm reading all of my instruction manual, and didn't understand the section on "Adjusting Mower Deck Wheels." Your video makes sense, and now I understand it better. Reading this entire manual, thoroughly.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 9 ай бұрын
Glad I could help
@benandsylvia
@benandsylvia 5 жыл бұрын
Man, you remind me of my Dad. A retired factory maintenance worker who fixed everything or would improvise like Macgyver. He'd set up shop in the morning (coffee) by the afternoon (beer) as he fixed the neighbor's lawn mowers, washing machines, microwaves , vacuums etc. In the evening (whiskey) he had a board meeting ( 5 neighbor's picking up whatever they dropped off for him to fix while having a drink with him.) He charged them absolutely nothing. In fact sometimes he paid for the parts himself. He was in asset to his community and a great father. Everyone misses him. Keep up the good work my friend.
@alanross3435
@alanross3435 6 ай бұрын
You’re a lucky man!☮✌🏻
@tedthomas3727
@tedthomas3727 2 жыл бұрын
I discovered Steve's videos about a year ago. They are my go to for guidance. I have learned so much from these. I also like seeing what beer he is featuring in the video. Thanks Steve!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 жыл бұрын
You're Welcome...
@shawnbeck2303
@shawnbeck2303 3 жыл бұрын
I changed my blades on my LA 130. Reset the deck at 2.5 inches with a 2.0 inch blocks. Then went out and cut my grass. Scalped the grass alot. Just found out. I needed to reset my scalping wheels. Really thought I goofed up. Thanks, Small engine man. Shawn.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 жыл бұрын
Good stuff
@lendermanshop
@lendermanshop 3 жыл бұрын
Always looking for the TRUTH these days!!! Thanks for the information, still very relevant!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 жыл бұрын
Very welcome
@TonyFromarty
@TonyFromarty Жыл бұрын
Thanks! I was scraping my lawn when mowing at 2inches height and wondered if the guide wheels needed to be moved, came looking on youtube and here is the answer.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Жыл бұрын
You're Welcome...
@sctony2000
@sctony2000 2 жыл бұрын
Thank you. I was just going to lower the wheels on my brand new zero turn. I will leave them set where they are already.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 жыл бұрын
You're Welcome...
@yogibeer9319
@yogibeer9319 2 жыл бұрын
This channel is ole Yogi’s happy place, lol! I got 40 + old live oak and water oak trees and their roots in this Florida sandy mucky ground that it has turned my yard into a riding mower demolition derby. I’ve got an old JD 105 that has so many parts welded on it from other mowers I call it Frankenmower 😂 Had the wind knocked out of me a few times from the steering wheel where I wasn’t paying attention 🤕. Thanks for another great video Steve!
@davidcunningham8319
@davidcunningham8319 4 жыл бұрын
I inherited my Husqvarna 48in mower from my dad after he passed. It is 15 years old or so and still has the original anti-scalp rollers. He showed me the logic behind them. I took his word for it because he always kept his equipment in top-notch shape. Heck, he had a 40 year old Sears push mower that only had the blade, wheels and pull cord replaced.
@1999Shortstuff
@1999Shortstuff 5 жыл бұрын
I have been cutting grass with a riding mower for 50+ years and I never knew how scalp wheels worked. Thanks!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@tlm3574
@tlm3574 Жыл бұрын
I just level the deck and set the scalp wheel 1/2 inch lower than bottom of deck. Done.
@49oldmachinist43
@49oldmachinist43 6 жыл бұрын
some people make it easy to learn, your one of them , thanks for easy DIY videos.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 6 жыл бұрын
You're Welcome...
@poofypoopy8838
@poofypoopy8838 5 жыл бұрын
@@StevesSmallEngineSaloon I've got a John deere l120 and it cuts unevenly. How do i adjust the deck. Mine doesn't have the rod and nut for adjustment. Its a plate on both sides with a bolt and nut. Hopefully that makes sense.
@johnhamilton9229
@johnhamilton9229 3 жыл бұрын
Hi Steve, armed with this information maybe the will be less scalping. Less scalping equals a nicer lawn to look at with a really cold beer. I’m one of the few that reads and files my manuals,doesn’t always mean I remember it all. 😁thanks Steve.
@jcheney2473
@jcheney2473 4 жыл бұрын
just a quick shout out to say thanks. i watched this video the other day to see how to set my wheels on my deck. after watching your video i reset my wheels and today when i mowed my lawn...finally no gouges. again, thanks for the videos.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Glad it helped!
@vayo2612
@vayo2612 4 жыл бұрын
Great Video. You're right, I don't read the manuals. But with people like out there, I now make a lot fewer mistakes. You are GREAT at this, please keep at it!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Thanks 👍
@MKrebs-kl7ud
@MKrebs-kl7ud 3 жыл бұрын
Damn- I gonna readjust my X500’s wheels. They been leaving ruts for like the last 10 years. Thanks Steve! Nice Bavaria beer from Holland.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 жыл бұрын
Good luck!
@alloutofdonuts3998
@alloutofdonuts3998 2 жыл бұрын
Funny, I replaced mine last year. I put them in the same spots the old worn out ones were. Now the front ones are worn out again. Glad to know how they’re actually supposed to be set now so when I replace them AGAIN, it’ll be correct!!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 жыл бұрын
Right on buddy!
@PowerHouse716
@PowerHouse716 4 жыл бұрын
Hey thanks for the videos. I have JD 108 lawn tractor that started cutting unevenly. After searching UTube for adjustment solutions, I couldn’t find one. I remembered a video you made that said that one should check the tire pressure before any other adjustments. In that I didn’t find any adjustments on my tractor I fortunately remembered your statement and the truth that it bore. Thanks for the great advice! I owe you a six pack!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Glad I could help
@TexasScout
@TexasScout 5 жыл бұрын
I bought a Huskvarna 54" Zero turn several years ago at Lowes. It was a "customer return". My buddy told me the guy didn't like the way it cut grass. I bought it for a little more than half price and took it home. Well, I figured out why the guy didn't like it. He never adjusted the anti-scalp wheels at all! They were all the way up! Reset them like yours and I was good to go.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 5 жыл бұрын
Right on buddy....
@brianbailey462
@brianbailey462 Жыл бұрын
up..... but the problem with your comment is that his were all the way up also....
@TexasScout
@TexasScout Жыл бұрын
@@brianbailey462 Iadjusted them all the way DOWN.
@brianbailey462
@brianbailey462 Жыл бұрын
@@TexasScout so that means you are cutting higher than before? But possibly rolling on those wheels a lot more as well?
@TexasScout
@TexasScout Жыл бұрын
@@brianbailey462 I set the deck at 2.75" then adjusted the deck wheels to just touch the ground.
@generalpublic3744
@generalpublic3744 3 жыл бұрын
Something you don't pay attention to, but clearly you should! Very helpful, thank you.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 жыл бұрын
You're very welcome!
@joemalcom7029
@joemalcom7029 4 жыл бұрын
You are right Steve. Nobody reads owners manuals anymore when you have great informative videos like yours. Love them so much I subscribed. Drink a beer!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Thanks 👍
@dagrote1
@dagrote1 4 жыл бұрын
No one reads them because they're so ineptly written they're almost unintelligible. Another reason is that 80% of them are designed only avert lawsuits. Do we really need to be told not to stick our heads underneath the deck when the blades are running?
@pleappleappleap
@pleappleappleap 6 ай бұрын
I was looking for information about this subject because I have my deck off, so I thought I'd adjust these while I was at it. I *just knew* you'd have the information I needed.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 6 ай бұрын
Right on
@Losi5t20
@Losi5t20 Жыл бұрын
Just got a ARIENS 46in mower and have to replace the blade engage cable. Notice the wheels on left side are all the way down. Right side are Raised to highest Hole. Your was a great help. Thank you
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Жыл бұрын
You're Welcome...
@jimdevoe8364
@jimdevoe8364 4 жыл бұрын
People have already said it below,....you make life much simpler
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Thank You...
@lowtideclyde
@lowtideclyde Жыл бұрын
Thanks Steve, I learned something new today, always a pleasure to see you videos.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Жыл бұрын
Glad to hear it
@ProteusDIY
@ProteusDIY 2 жыл бұрын
Thanks man. Super helpful. I just got a free x300 mower and set the wheel height properly thanks to your vid! Love your videos!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 жыл бұрын
You're Welcome...and Thank You...
@bikdav
@bikdav 3 жыл бұрын
Thank you for showing me this. My owners manual said nothing about them. My new mower has them completely off the ground in the lowest setting. I'll fix it.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 жыл бұрын
You're Welcome...
@adriancadorin476
@adriancadorin476 3 жыл бұрын
Thanks Steve now my lawn looks tops
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 жыл бұрын
You're Welcome...
@berjo77
@berjo77 8 ай бұрын
Your other advice I’ve used has all been helpful, so I DO believe you! I’ll double check mine tomorrow!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 8 ай бұрын
Right on
@tonymontana897
@tonymontana897 4 жыл бұрын
Thanks for the video Steve. I have the one on the left practically worn flat while the right one is good. i have purchased two new ones and will be replacing them both, plus adjust the mower deck height too. It's low on one side.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Right on
@BearE9090
@BearE9090 5 жыл бұрын
I've never own a rider mower but this tip will be very use full in the future.
@kennynickell9883
@kennynickell9883 2 жыл бұрын
Hey Steve, call me old school but I like to grease the deck wheel axle even tho the wheels aren't there to support the deck..Thx for teaching me lots about JD mower decks..
@tonysmith5465
@tonysmith5465 4 жыл бұрын
Very good video friend. Keep up the great work. Thanks a lot. SC Navy vet.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Thank You...and You're Welcome...
@mikew.5873
@mikew.5873 5 жыл бұрын
Man who would have guessed that they're not supposed to ride on the ground. Thanks again Steve.🇺🇲😎
@mblack360
@mblack360 4 жыл бұрын
Your videos are amazing. This fixed my mower, previous owner had the scalp wheels in the top holes. My yard looked terrible. Now it's fixed!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Great to hear!
@CooganBear
@CooganBear 4 жыл бұрын
Mine was riding right on the ground. Going to raise them up a notch today. Thanks again Steve. :)
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Glad to help
@DebR57
@DebR57 3 жыл бұрын
I just watched a couple of videos and I feel so much smarter, by the time I watch more I'll be intelligent! Love your videos.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 жыл бұрын
Cool!
@alhearn2688
@alhearn2688 3 жыл бұрын
@@StevesSmallEngineSaloon hi steve what type of grease fitting fits or goes on a troy bilt ride on mower model 13bb78bs563 serial 1d27mb40246 i have a 90 but i cannot get it to work the grease fitting strikes the rin on the tire of this machine
@petepeabody8905
@petepeabody8905 Жыл бұрын
I wonder which advice is more correct, the wheel height on the mower decks, or the fine brew needed to accomplish this task??? Great job
@robertcurtiss9871
@robertcurtiss9871 4 жыл бұрын
Stevo! Took care of my simple problem, but, DUH, I needed your help - THANKS!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
You're welcome!
@shawnlewis8955
@shawnlewis8955 8 ай бұрын
Thank you so much. I have my first 53 inch John Deere zero turn so your information was valuable. Thanks again.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 8 ай бұрын
Very welcome
@michaeloudeans3672
@michaeloudeans3672 3 жыл бұрын
Great video Steve. As always very informative. I knew what the wheels were for but did not know how to set them. Adios my friend. Muchas gracious .
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 жыл бұрын
Glad to help
@JazzyJS58
@JazzyJS58 2 жыл бұрын
I am glad he showed me that I got my JD. tractor from a relative didn't have no manual I will definitely check it out.👍
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 жыл бұрын
Good luck!
@xmarkmechanic1
@xmarkmechanic1 6 жыл бұрын
Glad you did a video on this common issue. I see them worn so bad they wear a groove in the deck bracket. Setting the wheels too low is also one of the culprits for breaking the mount off the deck.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 6 жыл бұрын
Thank You...
@bert7478
@bert7478 Жыл бұрын
That literally just happened to me. I had the blades replaced and noticed the first cut after that was scalping... today... the whole mount broke off.. now what 😳
@xmarkmechanic1
@xmarkmechanic1 Жыл бұрын
@@bert7478 In the mower shop we would weld them back on the deck. Any weld shop or mower shop should help. A competent mower repair shop should also level your deck.
@bert7478
@bert7478 Жыл бұрын
@@xmarkmechanic1 thank you so much-loved. I talked to my neighbor and he said he can do it! I'm so glad I don't have to replace the deck or worse, the whole mower!!
@williamwatson171
@williamwatson171 3 жыл бұрын
Bought a Craftsman 42 inch T110 and has no anti scalp wheels. My guestion is how many wheels 2 or 4 go on the deck and can I buy wheels kits and install myself. I only see holes on front of the deck on each side but nothing on rear of deck. I guess the holes are for wheel and bracket . Thanks
@jamesp9998
@jamesp9998 5 ай бұрын
I just bought the same mower . I’m installing two on the front for now . What did you end up doing ?
@johnr5179
@johnr5179 4 жыл бұрын
Hi Steve. Thanks again. I’m ashamed to admit i adjusted mine with a lump hammer last summer. Will do it properly from now on!!
@rayburnett3066
@rayburnett3066 2 жыл бұрын
I agreed with you. There is a lawn service that cuts across the road ,and they scrape the ground every time they go across a small bank
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 жыл бұрын
Thank You...
@PapaPietro11
@PapaPietro11 5 жыл бұрын
First of all, great beer selection. Second, very informative video. Issue solved. Thank you !
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@blackhorse2947
@blackhorse2947 2 жыл бұрын
Always great information Steve. I keep all your videos and they have saved me $$$ over time…….. Thanks
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 жыл бұрын
Glad to hear it
@hotrodhotrod-wc3bu
@hotrodhotrod-wc3bu 5 жыл бұрын
another great video man. ive been haveing this problem since i bought my john deer. every time I watch your videos i always learn something new thanks again bud have one for me by the way.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...
@Adamthebuilder
@Adamthebuilder 2 жыл бұрын
Love your videos man let’s keep the beer flowing!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 жыл бұрын
Thanks! Will do!
@semco72057
@semco72057 6 жыл бұрын
That is so true and I need to check mine again while Winter is here so the mowers will be ready for Spring when I have to take them back out and get back to cutting. Everyone should check their mowers and adjust their deck wheels or replace any bad wheels.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 6 жыл бұрын
Thanks Sid....
@TonyPanama
@TonyPanama 4 жыл бұрын
Thank you Steve, I just slayed down sod and to my horror I scalped some sloppy areas in my E140. I was just about to buy a second mower until I saw this. You really saved me time & money, thanks again!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Glad I could help
@kennethdileo6578
@kennethdileo6578 4 жыл бұрын
Beer is always good when your working on your equipment 👍
@markbritzman3598
@markbritzman3598 7 ай бұрын
Thank you for your videos I always like tips on how to repair my small equipment pieces
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 7 ай бұрын
Glad to help
@grandpa7278
@grandpa7278 3 жыл бұрын
Thanks, will check the height! 3 holes, it's in the middle. New mower, any unlevel spot it cuts deep into the dirt, like more then scalping Other issue, Craftsman 225 t, it's a tight turner those deck wheels drag sideways, they need be swivel wheels as to turn along with tires. ... like when going around a small tree.
@brianbailey462
@brianbailey462 Жыл бұрын
good idea.. those should be swivel wheels to be able to take the turns with the mower!
@richardcaton9395
@richardcaton9395 4 жыл бұрын
Ha! So that's what those wheels are really there for. Thanks for the education. Now I have to get them set up right and proper.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Glad to help!
@darringallant
@darringallant Жыл бұрын
Always a great explanation Steve, you're the best! 🍻
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Жыл бұрын
Glad you think so!
@tonym6920
@tonym6920 4 жыл бұрын
The best floating deck I had, was on a simplicity riding mower that I had a long time ago.
@CourtesyToot
@CourtesyToot Жыл бұрын
I can use this knowledge on the job and save CX some frustration, Thanks Steve!! Cheers 🍻
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Жыл бұрын
You're Welcome...
@GearyChlebus
@GearyChlebus 3 ай бұрын
Steve, what about the deck nose roller? Does that have anything to do with leveling the deck. I have a Craftsman 20 hp lawn tractor and would like to known how to replace the roller. Thanks for the videos they are a learning tool I use.
@rogersutton3581
@rogersutton3581 4 жыл бұрын
Thanks Steve Always learning from your videos ! I’ve always said the day you don’t learn something is a wasted day 🤗🤗👍
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Absolutely
@Andrew-lc3lo
@Andrew-lc3lo 10 ай бұрын
How should you set the wheels if you need to adjust the deck height a few times around a sloped yard?
@jasongodin7165
@jasongodin7165 2 жыл бұрын
thanks that helps, i like to set my cub at 3 and the wheels don;t touch the ground
@tylerjacquelinematheson8368
@tylerjacquelinematheson8368 Жыл бұрын
I admire your skillsets fella!!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Жыл бұрын
Thank You...
@len2524
@len2524 4 жыл бұрын
Ok Steve, this makes perfect sense and I’ve been doing it wrong. I have a Craftsman (Huskavarna) Garden Tractor, 25HP, 48” mower deck. My question is what about the two rear plastic wheels? 1/2” up as well?? Thanks.
@erinsquirkychannel501
@erinsquirkychannel501 2 жыл бұрын
Hi Steve love ur videos learned alot thank you so much for everything you do for us all, got a quick question, got a lt1000 Craftsman tractor 42in deck and it has no wheels on the deck and when mowing it scrapes iff my uneven couole of hills in my yard, can i put universal wheels on the front left n right sides of the deck and if so do i get 2 lil wheels or 4 wheels and which wheels do i get universal tractor wheels for 42in deck or some other wheels Thank you Steve
@foo4572
@foo4572 4 жыл бұрын
I remember my late father looking at our John Deere X540 and said to me ‘ those wheels shouldn’t be riding on the ground ‘.... just proves he was right as he usually was ... 😀👍
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Right on
@golddigge1
@golddigge1 4 жыл бұрын
Thanks for the tip. Got mine all set now . Thanks bro.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Glad I could help
@1keykneedeep
@1keykneedeep 5 жыл бұрын
Nice little piece of knowledge Steve. Happy Mowing buddy
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 5 жыл бұрын
Thank You...
@simonkenton5927
@simonkenton5927 6 жыл бұрын
Hey Steve just wanted to tell you how much I enjoy your videos and wanted to wish you a Merry Christmas have a great year and remember to keep Christ in your life. Simon
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 6 жыл бұрын
Thank You...
@frankallen8152
@frankallen8152 4 жыл бұрын
Hello Steve. thank you for all you do, this video was great. I have a Cub Cadet XT1 LT42. It only came with two anti scalp wheels. I would like to add two more on the read of the deck but cant find any thing. Can you help?
@alishabee5131
@alishabee5131 4 жыл бұрын
Thank you! I can’t believe how simple it is!
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
You're welcome!
@carymccordccim9096
@carymccordccim9096 2 жыл бұрын
Installed a relatively new grass here in Florida called "Citra Blue" It has an underlying mat which gets to be very shortly after installation about 1.5 to 2 inches thick. Have a Husqvarna 46 inch rider. Problem: Even on the highest height setting mower is still too low. Recommended cutting height is 4 inches. However, mower sinks into mat and cuts grass too short. Looking for recommendations on fix. Grass is beautiful and seems to like Florida climate.
@petewiltfang
@petewiltfang 3 жыл бұрын
My JD has 4 anti scalp wheels. Do I set them all at 1/2 inch? You have taught me alot when I thought I knew it all. Thank you!
@rwhide72542
@rwhide72542 3 жыл бұрын
Mine was set to low so went to adjust the deck. The cotter pin broke and fell out on the front so the deck was lying on the ground. I put a new pin and checked the adjustments and I was good to go.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 жыл бұрын
Right on
@normanziegelmeyer7693
@normanziegelmeyer7693 Жыл бұрын
Hi Steve I have learned much from your videos, Thanks. I have a question I hope You can answer, I have a craftsman Lawn tractor with the sears wheel weights. For the last 18 years I've had to remove weights to check or change tire pressure(poor weight design) and I'd like to modify the weights so I can access the valve stem without taking them off. Can you tell Me what's inside the plastic outer shell of the weights? I want to cut a hole to gain access to the stem. Thanks
@dougsaint4394
@dougsaint4394 2 жыл бұрын
Great advice always had my dragging gonna fix that.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 жыл бұрын
Right on
@kenhardscapenovice6387
@kenhardscapenovice6387 3 жыл бұрын
Thanks Steve! Your advice is greatly helpful
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 жыл бұрын
Glad to hear it!
@denverglenn7733
@denverglenn7733 4 жыл бұрын
I am glad I found your website. You have already given me two very good things for mine .thanks a lot and keep on truck
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Great to hear!
@gracesun3448
@gracesun3448 2 жыл бұрын
Thanks a lot for this video, which is exactly I am looking for.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 2 жыл бұрын
You're Welcome...
@davestuart6593
@davestuart6593 4 жыл бұрын
Another thing to check,before spring,again thx
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
You're Welcome...
@camamoutback
@camamoutback 5 жыл бұрын
my Kubota bx2360 has a sticker by each wheel that says leave a .5 inch gap from bottom of wheel to a hard surface.. so in my case sir you are right on !! thanks for the great vids..
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 5 жыл бұрын
You're Welcome...
@ammobake
@ammobake 6 жыл бұрын
I run a craftsman riding lawnmower from 1987 and it's still in great condition. One thing I noticed for parts, some stuff like starter solenoids count as engine parts. I called craftsman last summer looking for a starter solenoid and the lady didn't know what I was talking about. So in some cases you can't buy specific parts from your mower's manufacturer but have to get them from other vendors. Also, 6 months later I was in the local O'Reilly auto parts store and sure enough they carried a limited supply of riding lawnmower parts and the part I needed was there.
@johnnyllooddte3415
@johnnyllooddte3415 3 жыл бұрын
how do you raise the deck to mow higher.. mine scalps the lawn on the highest setting.. i need a field mower not a finish mower 2 - 4 inches high to cut 1 foot grasses
@malekabusalah527
@malekabusalah527 6 жыл бұрын
Hi Steve even though, I didn’t like your advertisement video for the very expensive stihl oil mix but I got to admit I learned something new today about these scalp wheel . Thanks a lot for this little information.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 6 жыл бұрын
You're Welcome...
@suncookrocks
@suncookrocks 5 жыл бұрын
My anti-scalp wheels are set exactly as you've described but I still have a couple of high and low spots in my yard that still get scalped every time.
@556suppressor
@556suppressor 4 жыл бұрын
That is normal. Small mounds will get scalped.
@daleolson3506
@daleolson3506 Жыл бұрын
Fix the mounds?
@richardbabb9666
@richardbabb9666 4 жыл бұрын
The problem I found when set like that and you want to clean the mower deck up with the clean out hose you can't get the deck all the way down to the ground to create a seal because it stops just a half inch below where you normally want to set these wheels. One of your earlier tips showed if you didn't have the mower all the way down it didn't clean very well at all.
@kegip417
@kegip417 2 жыл бұрын
was wondering about that myself
@agonyacres
@agonyacres Жыл бұрын
Thanks that helped me out a lot after leveling deck
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon Жыл бұрын
Glad to hear!
@kenthorne4611
@kenthorne4611 4 жыл бұрын
You also want to ensure the tire pressure in all 4 wheels are set correctly first
@VanJerell90
@VanJerell90 Жыл бұрын
You are correct. I use offset gator blades and I was cutting lower than the setting on my lawn mower because of low tire pressure in one tire. This also caused my anti scalp wheels to roll on the ground.
@bobbyratliff5292
@bobbyratliff5292 3 жыл бұрын
I like this..very helpful. Thanks Steve.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 3 жыл бұрын
Very welcome
@jw-dw7yf
@jw-dw7yf 6 жыл бұрын
great video, going to run out and check mine. Do you have a video on how to properly level a deck? I have an Ariens and somehow it became all out of whack when I hit a tree root, I replaced a blade but it has not been the same. Thanks Steve.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 6 жыл бұрын
Leveling video is on my list....
@jw-dw7yf
@jw-dw7yf 6 жыл бұрын
@@StevesSmallEngineSaloon Thanks Steve, I await the video!
@circlepfarm9729
@circlepfarm9729 6 жыл бұрын
jeff wolsfeld you might have broken a spindle when you hit that tree root. If one of the mounting ears cracks, it will cause your blade to run at an angle.
@jw-dw7yf
@jw-dw7yf 6 жыл бұрын
@@circlepfarm9729 thank you!
@cranstjs
@cranstjs 2 жыл бұрын
Hi. Thanks for the info. My old Snapper rear engine ride on lawn mower, that has a single blade, and an 8 hp engine, with the bicycle type handlebars, the worst thing about it I found in TX with Bermuda grass, where I would like to cut it to an inch long is that length seems to simply be too risky to get scalping with a floating deck type mower. The worst thing was it was designed without the anti scalp wheels. I bought a couple and rigged them on the back side of the platform because that was really the only place I could put them. At first, Ii had them too low and I had problems. But now apparently they are too high and if I hit a divot in the yard it will scalp some. Or if I don't cut only in the slowest speed, in turns there is a risk of scalping. In fact for the last 6 years I just said the heck with it and switched to a self propelled 22" mower that eliminates any problems. It almost never has an issue unless I have the mower too low. I will eyeball the wheels again with your tip and see if I can't improve it as I have a need to use it again with some health issues. My dad's tractor type mower, had rollers that went clear across the back of the deck and were very close to the ground and that to me was the best design, other than the newer 360 mowers.
@johno2355
@johno2355 6 жыл бұрын
Right on , never knew that, good info. Sounds like a great Sunday afternoon job in the spring and a good reason to spend some time out in the shop.👍🍻
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 6 жыл бұрын
Thank You...
@scottflurer8987
@scottflurer8987 4 жыл бұрын
I have been doing exactly what you told us NOT to do! I had the deck adjusted down so all 4 wheels touched on the dry road when the deck was lowered. Next time I go to cut grass, i'll lower the deck down and raise the wheels so they are 1/2 to 3/4" above ground. I thought thats how you adjusted the deck. No wonder my yard looks tilted.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 4 жыл бұрын
Nice work!
@themogul5846
@themogul5846 6 жыл бұрын
*_Steve is the best! Much love from Bangor, Maine._*
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 6 жыл бұрын
Thank You...
@billonthehill9984
@billonthehill9984 6 жыл бұрын
Always a pleasure Steve... You are spot on the money with the wheel settings. I am spoiled with my newer JD XT500, I think at (8) years of age currently. My wheels are pinned & easily adj. & they also pivot around 180° for rolling the deck out versus dragging it out! Lol... Ain't nothing worse than scalping, especially rocky outcroppings... The rocks always win! Off subject here Steve. What are your thoughts on the Husqvarna XP 372 chainsaw. I like most things about it, however as with all today's saws, carburetor adj. screws are now capped, at least until the warranty runs out. Then my tach gets put to good use for H & L & idle. I think all one can do is idle adj. currently. The saw is bit dated now, but it still cuts real strong as I understand it. It would be a nice addition to my Husky Rancher at close to 20 yrs. old & has a used lower end in it now... Bill Farr... :-)
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 6 жыл бұрын
372XP is one of my favorite saws of all time....
@ravikarashiravanthe7759
@ravikarashiravanthe7759 4 жыл бұрын
Hi Steve, I am little confused. Your video shows the wheels are bolted to top most hole on the deck. By doing so the wheels will be in to most position and may never touch ground even if the deck is scraping the ground. Please enlighten me. Thanks.
@joshbeekman5474
@joshbeekman5474 4 жыл бұрын
It depends if you are cutting a golf course green or a bumpy lawn. How high you like to cut your grass. 3 inches or 4 will be a different hole than say 2 inch lean cut. What ever your hight than put the scalp wheels 1/2" higher than the ground as to let the deck float until you take a corner. Then one side of the scalp wheels will touch without tearing up your lawn.
@carolinanumber1830
@carolinanumber1830 4 жыл бұрын
Hi Steve...I have a Troy-Bilt Lawn Tractor 13WN77KS011 Pony (2013 year date made) and it has no brackets or scalp wheels. Can I add some front and back. I am getting a bagger and I thought it might help. I have an uneven yard and I get scalp stuff too.. Thanks for any input..
@jimbauer5560
@jimbauer5560 4 жыл бұрын
Steve, great video, what about the decks with 4 wheels, same concept?
@Johnny53kgb-nsa
@Johnny53kgb-nsa 5 жыл бұрын
Good video Steve. When I change blades on my Husqvarna lgt2554, 3 blades, does it matter where each blade is in relation to the other? As long as the star pattern lines up and the blades are on the correct side down. Thank you
@kevinwoodcock7578
@kevinwoodcock7578 6 жыл бұрын
The merriest of Christmas wishes to you and your Family Steve, and a very prosperous New year. Thanks for doing what you do.
@StevesSmallEngineSaloon
@StevesSmallEngineSaloon 6 жыл бұрын
Thank You...and You're Welcome...
@jamesbutler5010
@jamesbutler5010 5 жыл бұрын
@@StevesSmallEngineSaloon I have a Scag and with the antiscalp wheel not touch ing you scalp yard
Your Riding Lawn Mower's Dirty Little Secret
6:47
Steve's Small Engine Saloon
Рет қаралды 2,4 МЛН
Installed New Blades and Still Cuts Uneven
15:26
Johnson's Small Engines
Рет қаралды 260 М.
$1 vs $500,000 Plane Ticket!
12:20
MrBeast
Рет қаралды 122 МЛН
Air Sigma Girl #sigma
0:32
Jin and Hattie
Рет қаралды 45 МЛН
Counter-Strike 2 - Новый кс. Cтарый я
13:10
Marmok
Рет қаралды 2,8 МЛН
GIANT Gummy Worm #shorts
0:42
Mr DegrEE
Рет қаралды 152 МЛН
Lawn Mower Scalp Wheels - Adjusting and Adding
15:39
How To with Doc
Рет қаралды 340 М.
Important Safety Issue With Your Riding Lawn Mower Tractor
7:49
Steve's Small Engine Saloon
Рет қаралды 66 М.
How To Adjust The Belt Tension On A Riding Lawn Mower
8:10
Steve's Small Engine Saloon
Рет қаралды 1,3 МЛН
How to Set the DECK WHEELS on Your Riding Lawn Mower - CUB CADET
5:16
BEST WAY To CLEAN Under The MOWING DECK on a Riding Lawn Mower
10:04
Steve's Small Engine Saloon
Рет қаралды 3,3 МЛН
How to LEVEL your mower deck (John Deere)
8:35
DIY JIM
Рет қаралды 500 М.
5 REASONS WHY YOU'RE MOWING UNEVENLY & HOW TO FIX IT 🚜👨‍🌾
8:57
Good Works Tractors
Рет қаралды 134 М.
Should You Buy a John Deere S100 Series or X300 Series Riding Mower?
14:11
Western Equipment
Рет қаралды 717 М.
SET THE MOWER DECK WHEELS ON YOUR JOHN DEERE (100 SERIES)
10:02
$1 vs $500,000 Plane Ticket!
12:20
MrBeast
Рет қаралды 122 МЛН