How to: Create Incredible CNC Wood Inlays

Рет қаралды 11,776

Күн бұрын

Пікірлер: 52

@saradomim 5 күн бұрын

It's very nice that you included mistakes and fixes for said mistakes. Paints a broader picture when it comes to understanding how much work actually goes into something like this.

@carbide3d 4 күн бұрын

Thanks for the feedback, Sara!

@dovlindner 4 күн бұрын

Got my shapokeo 5 a few months ago and have only recently been able to get back into cnc. It’s videos like this that give me the boost and clarity needed to get back into the hustle. Keep em coming 🙏

@carbide3d 4 күн бұрын

Let’s go!!!! Get out and make something fun.

@JvsH1924 5 күн бұрын

Love the humour in ALL videos

@carbide3d 4 күн бұрын

Thanks for "getting us".

@DavidCox-u9q 4 күн бұрын

That's a nice build, sir. And it had some great tips for a similar project I have been simmering in my imagination. Many thanks

@carbide3d 4 күн бұрын

Hey David. We’re stoked to hear that. Be sure and show us your completed project either in the forum or on IG. Good luck!

@greglkunz 5 күн бұрын

Outstanding video. Ditto to the comments on including mistakes, working through the failures, and ongoing learning. Finding the right mix of node editing vs. redrawing new shapes is so important in the workflow. I do inlays on the Nomad in a public forum so don't have the ability to keep alignments over time period of days but have learned (by experience) how to cut each layer/wood species of a small and simple inlay. It is all about applying concepts, as shared in this video, to your specific situation. This video gave me some new ideas.

@carbide3d 4 күн бұрын

Right on Greg. I've definitely seen your work on the forum. Good stuff. On NOMAD, you can create Known Offsets. The workflow is the same, just on a smaller bed.

@avramw 2 күн бұрын

Great video and explanations all around! Question about the green clamps that you use on the CNC table. How do you like them? Where did you get them from?

@carbide3d 2 күн бұрын

Those are our Essential Clamps. shop.carbide3d.com/collections/workholding/products/essential-clamps

@Debald 5 күн бұрын

Definitely on my list of projects for my new 5 Pro, thank you!!!

@carbide3d 4 күн бұрын

100%. We will definitely be making another board. We're so glad you enjoyed the video.

@PiercesPerfectPieces 5 күн бұрын

Kevin & Carbide3D are truly the best!! Great Video & I appreciate you even showing all the errors. Also I see nothing wrong with anyone buying already made panels/blocks etc etc (whatever). It depends on every individuals time constraints & or financial situation. Though I can definitely tell from your situation it was the time…. As I’ve never seen anyone make & use an inlay butcher block in 3 minutes time. 😉 Merry Christmas Kevin & All The Rest Of My Carbide3D Family! ✌️

@carbide3d 4 күн бұрын

Thanks Pierce! Merry Christmas from all of us here at C3D.

@Esnesnommoc45 Күн бұрын

I was just making a sign with cursive text inlays. The plugs would not go into the female carvings. There was a border. By border I mean a raised surface around the inlay plugs that sat on the sign and prevents the plugs from sinking.I followed Winston’s instructions to a t. Do you need to pocket out the inlay plugs within your 5 mm offset?

@carbide3d Күн бұрын

You need to post pictures and your file to the Forum Community. Then it can be dissected and downloaded. Tag us back with the link.

@Bantilloswoodshop 2 күн бұрын

Great video!

@LeeFletcher-tl7eb 4 күн бұрын

Great job and video as always! Question though... All of this inside Carbide Create? How did you get it to raster cut when you were surfacing and flattening the plugs? I did not think this was an option in CC?

@carbide3d 4 күн бұрын

The beta of Create Pro recently added a facing toolpath that can be use for surfacing/flattening.

@LeeFletcher-tl7eb 4 күн бұрын

@@carbide3d I need to check software updates more often! Just dropped $$ on Vetric V-pro. :(

@DavidM2002 5 күн бұрын

If you would like to try some really interesting but rather expensive material to cut and perhaps inlay, try carbon fibre sheet. I use CF for making clock gears, motorcycle parts, and many other things. I normally use 4mm sheet ( the sheet size is about 10" x 20" ) that I bought online. I do use 2mm occasionally and, for its thickness, it's super tough. It's a dream to cut but a vacuum is really important as the resulting dust is a bit toxic. Use 1/16" end mills although I prefer 1/16" burrs. The edges need little to zero sanding. You can cut through 4mm CF in 3 passes or less. CF is a bit hard on tools. If I could do all of my projects in CF where I would otherwise use aluminum or sometimes wood, I would.

@carbide3d 4 күн бұрын

There will be a ton of CF work on the BMW. I'm sure some parts will end up on the channel here. 😉

@michaelbruesch5941 3 күн бұрын

How do you run the tool toolpathing to run side to side when flattening the plugs?

@carbide3d 3 күн бұрын

Hey Michael, I was creating the vectors for that pattern while simultaniously asking the software team to get us a facing toolpath in Create. The software team came just recently. The newest Beta Version of Carbide Create Pro has a facing toolpath incorporated. Download it here: carbide3d.com/carbidecreate/beta/

@michaelbruesch5941 3 күн бұрын

@carbide3d great thank you! This Christmas, family is getting a lot of inlay cutting boards so this will definitely help

@gizmobowen 4 күн бұрын

This makes me want to try Carbide Create again as a general drafting tool for making vector files. I can create DXF files with AutoCAD, but they sometimes don't play with well with some of my CAM software. I bet I could do what I need with Carbide Create, if I spent a little time getting more familiar with it. Thanks.

@carbide3d 4 күн бұрын

The typical pattern is this: Get into CNC / Use Carbide Create / Decide Carbide Create is too limiting for my dreams of CNC greatness / Pay for Fusion / Use Fusion to 1/10th it's capability, but make some interesting stuff / Think "Maybe Create would be easier for these basic projects" / Try Create again / Discover, yes Create is more efficient for a wide array of projects. This is how it went for me before I worked for Carbide 3D. Each software has its strengths and weaknesses. - Create = Fantastic for 3D Topographic and Artistic elements / Fusion = Horrible for this application - Fusion = Terrific for parametric modeling and making technical parts / Create = Challenging for defined slopes and lofts I own many hammers. Each one can drive nails. But each one excels with a particular type of nail. Software = Hammer CNC Projects =- Nails - Kevin

@KarlBunker 5 күн бұрын

"Don't forget to flip your artwork, because you _will_ forget to flip your artwork." 😀

@carbide3d 4 күн бұрын

😂

@MrHhhscott 4 күн бұрын

Link to the cutting board you started with?

@carbide3d 4 күн бұрын

Hey Scott, I'll add this back to the description as well. Thanks for the note: a.co/d/hNESKyc

@myk3l9675 4 күн бұрын

Its not about the destination, its about the (mid) journey!

@carbide3d 4 күн бұрын

Hey yooooooooo...!

@mossyboy6 4 күн бұрын

As a cnc router and bmw 2002 owner, I approve of this.

@carbide3d 4 күн бұрын

YES!!! The wolfpack is growing

@Bricksww 5 күн бұрын

If those boards were soaked in mineral oil, surfacing them may not be enough to remove the residual oil and cause your glue ups to fail. Just a thought..

@carbide3d 4 күн бұрын

Excellent thought, that definitely could be a factor.

@antoniosoto801 4 күн бұрын

How much would you ask for that if you decided to sell it? I’m thinking $500

@carbide3d 4 күн бұрын

Current quality of build $50@ is a good mark. With the process refined, that many material changes would carry a higher price. $800 to $1000. This charge depends greatly on the design work required. Original design plus many inlays = $1000+ all day.

@antoniosoto801 4 күн бұрын

Thanks for putting it in perspective. How many hours total would be the estimate to put in this project?

@carbide3d 4 күн бұрын

WAAAAAY too many. But this is the front end. There's never an immediate return on investment for project #1. Like anything, the return comes on effort #3. By then, my skills have progressed, and my output quality has risen. These two factors lead to an increase in margin. Refining the design into cuttable elements and deciding on the overlaps sucked up the most time. The key here is understanding the limitations of the materials and the overall final look in the board. Proportionality....... Second on the time suck list was the making of plugs. As I mentioned in the video, the total time would be cut by 2/3 for board #2. The best thing to do is go full send on build 1. And don't worry about having it come out perfect. Then, take what you learned and go again. - Kevin

@antoniosoto801 2 күн бұрын

@@carbide3d Thanks for taking the time to articulate your thoughts on this. There is definitely a learning curve and some process improvement involved. Once you have a repeatable process, I agree the hours should come down significantly. I will try a couple of simpler projects before getting go something like this.