How to create the best Dust Extraction System!

In this video, I will show you how to make the most innovative dust extraction system for your workshop yourself!
The plans will be available on my website after the second part of this video next.
-------------------------------------------------------------------------------
In this video, I said that the CamVac can run for 45 minutes and then have to cool down for 10 minutes. This information is not correct. This should be a running time of max 2 hours!
-------------------------------------------------------------------------------
But you can already find free plans from other shop improvement projects at: hookedonwood.online/Shop-impr...
More information about the products used in this video you can find here:
Worldwide dealer list Record Power CamVac
recordpower.com/camvac-worldw...
NonaMax filters for Record Power CamVac
stockroomsupply.com/collectio...
Gweike Cloud Co2 laser (200 dollars discount with code: HOOKED)
www.gweikecloud.com/collectio...
HEPA Filters Silent box
amzn.to/41qBaMC
Horizontal Toggle clamp 61mm
amzn.to/42JPyAl
Light
amzn.to/42pJuxq
Ball Wheels
amzn.to/453zETJ
Pressure Valve
amzn.to/3pzD0O0
Oneida Cyclone
www.oneida-air.com/dust-deput...
-----------------------------------------------------------------------------------------------------------
My Personal Banggood favorite of all time!
1. Hongdui Edge Trimmer
www.banggood.com/custlink/GGK...
2. Doweling Jig / Multi-row puncher
www.banggood.com/custlink/KDv...
3. 20-watt diode laser
www.banggood.com/custlink/K3v...
4. Drill guide cabinet jig
www.banggood.com/custlink/KDD...
5. T-ruler
www.banggood.com/custlink/3GG...
6. Precision square
www.banggood.com/custlink/DKv...
7. Miter square
www.banggood.com/custlink/GmG...
8. Miter square brass
www.banggood.com/custlink/vmG...
9. Height gauge
www.banggood.com/custlink/KGG...
-------------------------------------------------------------------------------------
My name is Dennis and I am from Hooked on Wood.
Subscribe to my channel!
kzbin.info/door/uvj...
My KZbin channel is a hobby. This means I try to upload 1 a 2 video's a month. But this is not at a specific schedule. So If you do not want to miss my videos. Subscribe and click the notification.
Products I use in my workshop.
Table saw with dust system:
Felder 740S Slider
Felder 140
Workbench:
Incra master-R-router lift
AEG 1400w router
Incra 25" SL positioner with Wonder Fence
Drill press: Jet JDP 15B
Miter saw: Festool Kapex 60
Different links to products I use
Clamps:
Axminster trade hold down clamps
Piher Rail guide clamps
Micro Jig dovetail clamps
Bessey parallel clamps
Axminster trade parallel clamps
Push blocks
Micro Jig Gripper
Incra Push block
Thank you for viewing.
Best regards,
Dennis

[@ianleonlo]

probably the sexiest self made extraction system on youtube.

[@kylereed3577]

Been waiting for this one! Thanks Dennis, can’t wait for part two. Great design and execution it’s just nice to look at.

[@frederickmichaud6783]

This came together really well! Looking forward to part 2!

[@yvescouturier2801]

You're an artist Dennis ! BRAVO !

[@idlersdream826]

Great video Dennis, clarifying what the average home woodworker with a small workshop requires. Your system looks amazing as usual 👌. Looking forward to part 2 👍.

[@menruletheworld]

Hey Dennis, great video again, can’t wait for the next installment. Always a joy to watch your video’s, keep those video’s coming!!

[@heystarfish100]

Thanks for posting this long awaited video Dennis. I enjoy watching your shop develop with your ingenuity and unending passion for detail. Great job as I have come to expect. 😎👍

[@MCsCreations]

Fantastic work, Dennis! It's looking amazing! 😃 Really well done!!! Stay safe there with your family! 🖖😊

[@scottboettcher1344]

Dennis, your cyclone bucket lift is ingenious! Loved the pace of the video, it was just right; looking forward to next week.

[@colindoesdiy]

Can't wait to sit down properly and watch this one Dennis. Dust extraction in my workshop is very hit and miss at the moment so really need to get it sorted properly.

[@AertPietersz]

This is absolutely brilliant. Entertaining, enlightening and well explained. Thank you!

[@homesteadfromscratch]

I appreciated the detail and depth of the comparison in the introduction.

[@petenelson8136]

Another fantastic video, Dennis. I'm looking forward to part 2 and the plans to replicate this in my shop.

[@captnsnafu]

Very interresting vacuuming solution and as usual, very good job !

[@ronsnyder2209]

I’ve been racking my brain trying to figuring out how to build a perfect dust collection system. Yours is perfect for my need. Dennis, thank you so much for producing this video. I know it take great effort and time on your part. I cannot wait for part two.

[@zapa1pnt]

Dennis, I find you to be a creative and imaginative designer as well as a skilled and detailed oriented builder. You hit all the nails. I love the bucket raising apparatus. That could help a lot of wood workers. P.S.: The vacuum relief valve was a great idea and well worth 5 to 6 Dollars. 😁✌🖖

[@bradleytuckwell4881]

Great work and a very we’ll thought out design. Looking forward to part two

[@mrjdwoodworks]

I think we can all appreciate the time and effort this has cost you to create this awesome design and effective system Dennis! For sure when I will upgrade my dustextraction in time I will be implementing your ideas starting with the exchange of my Record Power D1000 with the Camvac. Also, working as a sportsphysio having treated many COPD and other longue related issues we should all be aware of the dangers of a bad operating dust extraction system or the lack there of, which makes me appreciate this video even more as it clearly promotes focussing on our own dust extraction. Great job Dennis!!!👊👌

[@genewhitesides2722]

Excellent craftsmanship. Great explanations. Thank you for sharing your knowledge. So far I have found each of your videos informative and worth watching.

[@markpalmer3071]

Great video and the dust collection looks great

[@cottagemail4066]

ALWAYS look forward to seeing what new ideas Dennis comes up with! NEVER disappoints.! 😊

[@samrix5793]

Awesome!

[@juampykoch4261]

excelente video, i love seeing this kind of series as much as i love the china tools one, greetings from Argentina

[@simfro2530]

Hi Dennis, Good video with good depth as always. Information I was most happy about was that I only have to wait one week for no. 2❤

[@kosielemmer]

Dennis. Again you produce an informative and entertaining video. I have one of these camvacs and even if getting my dust collection perfectly set up like you did I watched the video completely and enjoyed it so much. And when I get around to setting up my dust extraction I will definitely watch it again.

[@HookedonWood]

Thanks

[@sylvioks]

Really nice my friend!! Great upgrade

[@bobbyj0708]

Your shop equipment is so gorgeous I'd be tempted to highlight even more with some LEDs. Just top notch stuff. Thanks for sharing.

[@kevincinnamontoast3669]

Wouldn't leds detract from the design?

[@CraftySven]

excellent craftsmanship and such a sleek system !

[@g0fum]

Brilliant video Dennis thank you. I bought the 2 motor camvac because of your review video and haven't looked at any others because of the shear quality of it. The service from record power has been superb here in the UK too. I made my own cyclone collector out of a cheap metal drum from Amazon and some piping and the system works perfectly for my and my small shed workshop. Being a hobbyist the system is perfect for me.

[@HookedonWood]

I agree, I honestly do not think there is a better system at this moment for the hobbyist workshop!

[@chrisr1241]

You are so good. Your videos are a pleasure…. Best of the best

[@alexisonfire199]

Denis, Ive been a fan for quite some time now and let me tell you. You NEED to start selling complete plans as soon as possible. Keep up the good work!

[@gebox2791]

Magnifique J'adore les fous comme vous Genial decoratif ..bref superbe Un bonjour de la france ..

[@toddharshbarger8616]

I am most impressed with the elements you built from scratch (the dust collection box and all the design elements and plumbing) rather than the parts you purchase like the camvac and the cyclone.

[@jeromestsauver]

Inspiring! I would love to build something just like this!

[@andrzej3511]

Finally, someone cleared my mind about the difference between high-pressure and low-pressure dust removal systems. Manufacturers outdo each other in giving dry parameters without analyzing what is actually needed in an amateur workshop. For me, this is very valuable information - thanks to it I can make informed decisions!!! THX!

[@HookedonWood]

Thanks Andre, In my video about dust extraction I dive a little bit deeper, but than, I think you have all the information to make a good decision on the right dust extractor for your workshop.

[@andrzej3511]

@@HookedonWood I've had a couple of hours to think it over, and let me tell You, I'm not going to break the opened doors. If this equipment works for you, and You are very glad, it will also work in my shed, which is slightly larger. The difference is that I'm not going to give up two large vacuum cleaners (the ones on rollers, for easy relocation). One is for clearing the shed only, and the other, less powerful, is used to operate small hand tools, usually battery-powered, and usually used in unexpected places. But I don't have a "big" or more precisely: a central system adapted to my workshop. However, I have an urgent need to create something meaningful, because this ubiquitous, damned dust drives me crazy! Please note, Dennis, that imitating someone it is an expression of the highest appreciation for the imitated one! :)))) One thing I couldn't figure out, the cyclone. Is it a purchased item or a self-made one? Can you tell me more in the second part?

[@TonyM0ntana]

What a fantastic workshop! And good quality videos! Any chance you could show some more of your ducting in another video?

[@brokenhill8590]

Impressive and truly craftsman ship … look fwd to yr next episode … do consider putting together a parts list and drawings

[@riba2233]

Looking really good, waiting for part 2 :)

[@allthegear-noidea1264]

You’re an artist more than a woodworker. The shop is coming together so well! Very jealous! I’m trying to negotiate with the wife on taking up more garden space with a bigger shop… it’s a tricky negotiation 😀

[@HookedonWood]

Well worth the try 😀👍

[@Looyenss]

Thanks Dennis, amazing video. I’m gonna buy a camvac 😂

[@waltersheehey]

I'm looking forward to see your process for relocating the switches for the CamVac. My guess is that it's pretty simple and just involves using the appropriate gauge wire. I use a remote to turn my own system on and off and would love to figure out a way to configure the three switches so that I could use a remote for each one. I'm also contemplating setting up my machines with automated blast gates and am considering if it would be possible to do it so that certain machines would activate a specific number of motors on the CamVac.

[@stevet47]

Same concept as the Oneida Supercell. Very interesting, I look forward to the next video!!

[@HookedonWood]

Yes, but with the CaVac you can choose how many motors you want to run. And The concentrated air outlets do have an advantage

[@sunalwaysshinesonTVs]

That bucket systme is genius!

[@davidattenberg4720]

Good job!

[@georgelavelle2097]

Hi Dennis, I've been watching your videos for a while. Nice content, good ideas. I've watched hundreds of videos on dust collection and how to improve it. And I'm still amazed that 90% of woodworkers keep a canister/ bag inside their shop. Why? That small dust is what kills. After the separator vent outside!!! A dryer vent will do. Save your lungs.😊

[@huntdupl]

Absolutely fantastic. Innovative and informative.

[@tinkercavedweller]

hey Dennis, great video as always!!! I'm sorry, but I have to "steal" all your hard r&d work and build a similar dust extraction 😁 I already dismissed the cam vac system in favor of a HVLP, but your video rekindled the interest again! Stoked for the second part!

[@thomasalison6188]

Outstanding!!

[@keithrex3123]

Very nice thank you for sharing 👍 👍

[@michaelmcnally]

Excellent video. Thank you. I was going back and forth between which dust extraction system to buy. Now I am sure that CamVac is the way to go for my small home shop. Your cyclone system is wonderful! I wonder how much value I would get from cyclone system would be for me. I think building an Arduino based controller for turning on and off the switches will be my first project for the CamVac to cycle through the 3 motors so 2 are on at anytime and one is always resting.

[@James-lo5ne]

I consider myself somewhat smart but when i see the stuff you do i feel like i need to take classes on engineering.

[@paololattuada9652]

You are such a source of inspiration!!!

[@HookedonWood]

Thanks Paolo!

[@anthonyvdh]

Fantastic video! Dennis, any chance of you doing ducting video that you talked about in one of your previous videos? I can see glimpses of parts, but not getting to see how it all comes together is a missing gap :)

[@millesilke8579]

Amazing Shop

[@eweyedezine]

As always, top notch video and detail on your designs. What are the specs on the pressure valve? I’m in the US, and the Amazon link doesn’t get us to the correct item.

[@lawman1965]

Excellent video. I currently work in a UK single car garage, a pretty small space and dust extraction is an obsession of mine. I've got a small dust collector for my table saw, planer and router table. But I've never been really happy with the airflow. I also have a Festool CT Midi for hand tools and an Axminster NVD 750 connected to some ducting for my Kapex Mitre Saw and small record power bandsaw. Yep, I have too many machines and I've been meaning to do something about it. The dust collector takes space that I could use for other things, as does the NVD 750. I like the look of the CamVac you're using and I could sell both the NVD 750 and the Charnwood Dust Collector and plumb a CamVac into a 100mm dust system. I need to do some more research on this - the dust collection on my Axminster Table Saw (Axminster Craft AC254) is terrible, and with the pressure loss on the large collector I have to use both that (on the main port) and the NVD 750 (on the crown guard). I'd like a machine that works on both!!!!! Thanks for the video and I look forward to next weeks installment. Rich (Pedalling Woodworker)

[@duncanreed2391]

I am using a 2 motor camvac with Axminster craft 254, and only get dust on the top table if just trimming wood, the crown guard could be a better design and that would stop that as well. Using the Axminster cyclone between saw and camvac.

[@chewbacca8748]

@@duncanreed2391 been looking at the axminster cyclone (I assume you mean the 100mm metal cyclone that is available on it's own?) but it says it's not for use with HPLV extractors (like the camvac). From your comment above it seems that you are not having any difficulties with it. How efficient are you finding it in general, and any other comments about using it with the camvac at all?

[@duncanreed2391]

No issues at all, Although the Camvac markets itself more as dust extractor than a shop vac i.e. connects it to a planner thicknesser rather than your hand sander. You can get the plastic bag to explode if you completely block the hose, did that once. @@chewbacca8748

[@mikejarves7611]

I would love to see you design and build some furniture.

[@markarmstrong2592]

Awesome video Dennis i don,t have the brains to figure this all out so it is great to listen to you Thanks again

[@HookedonWood]

Thanks Mark.

[@jonanderstangen6184]

Nice work Dennis! Looking forward to the next one! Not a fan of split videos, but this time it was the correct decision! Keep it up!!

[@HookedonWood]

Thanks Jon!

[@aaronwoodill5310]

Hey Dennis - love the videos and designs. Where did you get the 6” to 4” adapters for the cyclone? Thanks

[@ctmurray]

I loved the pacing and detail, two videos seems ideal. I am sad to say I cannot get a CamVac system in New Zealand. There is one company that is trying to secure stock but have so far failed, Record seems to not even respond to their proposal. We are just too far off the map I guess. All I can get are single motor systems like the Scheppach HA-1000, with 1.5 HP motor. I would be using this on a ShopVac Compact saw with 2.5 inch output for dust and a second station for sanders and routers (and a smaller cyclone) If you have any thoughts on this system I would be very interested. Love your videos.

[@gregoshk]

Fantastic video, Dennis, I've been waiting for this one! Would you recommend this setup with the 3 motor CamVac and cyclone for dust extraction on a cabinet saw? One connection would be for above the table collection (2.5") and one for below the table connection (4")?

[@HookedonWood]

Hi Greg, In this situation you can get better results when you run a 3 HP dust collector with at least 5 inch pipe to the Cabinet saw, Before this you need an Y adapter to the overhead dust collection. But that become a costly project. Second best is a 3 motor CamVac. When there is an internal hose to the saw blade, then I think a 3 motor CamVac will even be better than a Dust Collector alternative, even with a 5 inch pipe.

[@moovintruespace994]

Dennis you're such a show of‼️ Bloody amazing. Do you work for Festool? Serious engineer ❣️❣️❣️❣️❣️ Flawless ‼️

[@petrsedlar2893]

Finallyyyyy

[@DirkieB]

Incredible. I need to downsize my camvac and upgrade with such an easy release bucket and cyclone. Definitely need the silent box too, and why not proper filters? Fantastic stuff. On second thought, maybe I'll give it a go to make my camvac barrel more easily detachable from the lid with the motors with a system like you have on the cyclone bucket. Something to think about!

[@HookedonWood]

creative thoughts! Apart from the money part, I think I like the Cyclone.

[@DirkieB]

@@HookedonWood would love one but … 12m2 😅

[@stuartsherman5975]

Thank you. Very helpful video. I am trying to find a budget friendly solution to collect dust for a cnc router that uses a handheld palm router. Thus, would you recommend a Camvac attached to a cnc machine? I ask since you mentioned the Camvac can only run for 45 minutes at a time. However, a cnc can run hours at a time. Many wood workers use a shop vacuum but the Camvav is much better than the shop vacuum. Any light you could provide would be greatly appreciated.

[@blik2108]

Great video Dennis. Inspired me to do this. Did you have any trouble sourcing the cyclone? The UK distributor charges an arm and a leg - equivalent $330 vs the US price of $180

[@JohnToretto]

Awesome …!!! 😊

[@MichaV88]

You're an absolutely genius builder! I am impressed every time. Which model of CamVac do you use?

[@HookedonWood]

I use the 3 motor version, but I run mostly on 1 and 2 motors. Three motors will be beneficial when you connect planer and big table saw.

[@petterlund4806]

Thanks!

[@michaelbrown1323]

Dennis, I really like your new dream work shop. I'm adapting several of your ideas and processes into my own shop. I noticed that you upgraded your camvac to the three motor model. Can you explain why? I almost purchased the two motor version before I noticed your upgrade. Also, what size drum/barrel do you use? It seems that the smaller drum would work when you use a pre-separater since 99% of the dust is separated out before getting to the camvac. Thoughts?

[@hoefie76]

Ha Dennis super gaaf systeem dat ik graag ga bouwen. Vraagje welke emmer heb je gebruikt hiervoor? Misschien een link.

[@dhidhat]

This is genius.

[@markdrewitt8965]

Really great video Denis, very informative and inspirational. Question on your experience with the three motor cam vac. You mentioned the motors can run for 45 mins then need to cool for 10, does the cam vac need to have all the motors off to cool or can you run two out of three motors and cycle the motors on and off to get continuous operation? I am looking at the Cam vac for my small work shop which has a small hobby CNC and carve can last 3 or more hours. Your remote on off switch gave me the idea to have a simple timer set up to have a motor run for 20 minutes then cool for 10, so I could get continuous 2 motor operation which air flow and pressure wise would work for a small CNC.

[@HookedonWood]

Your thinking is right. I bought my first CamVac 3 years ago. And someone told me the 45 minutes. Never got that limit although i am pretty sure I run that time. But it will protect itself. Anyway. I got a call from record power this information is wrong. It should run for 2 hours and then cool down. Will correct that next week

[@anonhdksnkkd]

Great video Dennis! Would you also recommend the Camvac over a normal shop vac for a small shop with only power tools that have small dust outlets (

[@HookedonWood]

sorry for my late reply, but Yes, one, but I would suggest two motor CamVac is perfect. It will be the last shop vac you need and you have a large empty bag and it is just very powerfull.

[@dalmandalmanable]

Great video Dennis, very informative! What do you use for blast gates? I find the quality of blast gates very hit and miss, and often have air leak around them.

[@HookedonWood]

I do have them from Record Power, They are cheap and do the job, so they never got my attention in a negative way. But I am sure there must be better ones. I think there will be a time I will dive into this. But for now they work OK.

[@jvdheuvel1976]

Dennis, wederom een schitterende constructie deze afzuiginstallatie! Kan je vertellen hoe hoog de cycloon en de emmerhouder samen zijn, inclusied de knie van de buis die naar de Camvac loopt? Ik werk voornamelijk op de inrit en zou daarom de Camvac op een rollend platform zetten, samen met de emmer + cycloon én de silent box, zodat alles in één geheel verrijdbaar is.

[@drozdsamuel1675]

Bravo

[@user-ri3gm7yd9s]

awesome job on this .can you tell me why you used a 6 inch cyclone instead of the 4 inch model

[@HookedonWood]

availability, 4 inch would be enough!

[@arnofrom9350]

Hoi Dennis, ik heb een Hammer A326 vlak- vandiktebank in bestelling. Daarbij heb ik ook de Felder AF12 gekocht op aanbevelen van de dealer. Had de VacCam hier ook op gepast? Dankjewel en groeten

[@clemoniii]

Excellent! Was about to order 4" Oneita cyclone this afternoon, can you elaborate on decision to use 6". I have 2 motor CamVac, but can upgrade to 3 motor if required. Primary tool is Harvey 4hp dovetail Tablesaw with Shark Overhead dust hood.

[@HookedonWood]

Hi, This is the Cyclone they offer now. So, it is a 6 inch opening for Extractor (with adapter 4 inch) and a 5 inch outlet for duct network (with adapter 4 inch) Further no technical reason. When you have a with table saw overhead dust hood, you need 3 motors. A dust collector is only beneficial when you create a 6 or 5 inch duct network till your Harvey. When you work with 4 inch duct system the CamVac will give more airflow.

[@clemoniii]

@Hooked on Wood thank you my friend! 3 motor CamVac will be ordered today!

[@ZeldaBeauford-xp8yp]

Hi Denis! At 12:50, when you talk about the pressure relief valve, you snap the acrylic mount into a piece of tubing. How does this fit together? Is there a groove or a lip holding the acrylic? I’d like to make similar holder. Thanks!

[@HookedonWood]

by friction, and the tubing has a smaller inner ring, so it sucks against this. But with a laser it is pretty easy to make the correct dimensions that fit the way you want.

[@kevinwillis6707]

do you have a single outlet on the top of the camvac dennis? or do more than 1 go into a manifold and into a single pipe into the side of the cyclone? thanks.

[@HookedonWood]

Hi Kevin, the Camvac has one 4 inch air-inlet that goes to the Cyclone. It has depending on motors, 1,2,or 3 smaller outlets.

[@davidm2645]

Denis, on the video, what is the digital display measurement device you use with your Kapex? It sits to the left of the saw.

[@HookedonWood]

That is my digital stop for the miter saw. Made a video about it. You will love it

[@ice4142]

Hi Denis, you said the three motor cam vac worked ok on your Hammer A3 31. You said you had the 2 motor cam vac for a while too. Did this also work ok? I don't think the power in my workshop will run the three motors and the planer at the same time. Thank you

[@HookedonWood]

Hi, the 2-motor CamVac will give decent results on the A3 31. But it will be better with the 3 motor. But when it is not possible, it is an acceptable compromise in my view.

[@jaapvanklaveren6929]

You make it clear: To loosen dust from a surface, force is needed. Airspeed provides this force. Volume is only necessary if it is a large surface. Thanks for your clear explanation.

[@davidcouper7445]

Great build Dennis, how much fine dust does the cyclone capture and does it make a difference how many motors are turned on?

[@HookedonWood]

with the HEPA filters it captures 99.5% of the particles till 0.03 micron. Original this is 0.05 micron. I do not know if this depends on the amount of motors, I think not. Every motor has its own filter, and the two HEPA filters have enough surface to deal with the maximum amount of CFM.

[@davidcouper7445]

@@HookedonWood thanks Dennis, I actually meant the Oneida cyclone, does it capture much dust or just the chips?

[@HookedonWood]

oh, sorry. No, it does more than just chips. They claim 99% and I think this will be close to the truth, but based on weight. So, there will be very fine dust that will enter. But it will keep the CamVac so much cleaner and the expand the time before changing the filters.

[@davidcouper7445]

Thanks Dennis, looks good!

[@jakehartley391]

Awesome video that answered a ton of questions. I love all of your solutions and can see myself trying to adopt some of them. With that in mind could you do a blueprint style view of your system? And how did you move the controls for the camvac remotely?

[@jakehartley391]

Also, your heap filter link didn’t work correctly.

[@HookedonWood]

Control will come next week😀

[@keith6848]

Would a smaller 2 1/2inch cyclone work with these camvacs? Or do you need the larger diameter cyclone?

[@HookedonWood]

It will work, but you will loose so much potential. You can not compress air, so if it has to go to a diameter half the size of the CamVac's inlet, it will have impact on the performance. That said, from all the dust extractors, I think the CamVac will do this at best. It is not that you will loose all the suction, it still give you a lot of suction.

[@Jantimsen]

Nice hoor! Wat is dat voor een controller dan? Heb je die zelf gemaakt?

[@HookedonWood]

Nee, die heb ik verplaatst. Bij de 3 motor CamVac kan dat heel makkelijk.

[@frijoli9579]

Would love to see a schematic diagram of the system, and the controls.

[@HookedonWood]

I can not create that. Sorry

[@verybigheart]

If the outlets from the CamVac were vented outside there would be no need for the HEPA filters. It would also reduce heat in summer, keeping the workshop cooler.

[@HookedonWood]

Yes, it is no problem to do that, of course. In fact, in my former workshop I had this solution. But you have to be aware of a few things. You need a ventilation system so air can enter your shop. In the winter, cool air enters your shop, and in the summer, hot air enters your shop. When it does not run all day, this can be an option. I chose this option now because I find it more comfortable. When I watch my air meter, I do not have a problem with dirty air inside. So, it is the best of both worlds. But again, you could isolate the sound even more to vent it outside without dirty air inside.

[@wilfriedverhulst4539]

fijn werk 👍 🖖

[@jeffkowalski4936]

I tried the link for the pressure valve and it showed cyclones. Is there a different link? Great work! I never thought I’d say this but….. that is a sexy dust collection system. Lol

[@HookedonWood]

Hi Jeff, I think this is because it is not available on the Amazon page in your country. it is the DUST COMMANDER DUST-SP. perhaps you can google. Oh, and yes, I agree with you, the design very nice and sexy :-)

[@jeffkowalski4936]

@@HookedonWood found it, thanks!

[@ProjectKelstone]

Sounds like a great sysstem. I wish I could understand you. 😅

[@HookedonWood]

Use the sub-titles. That can help!

[@mrgunn2726]

The CanVac is a great product, but is not easily acquired in North America, further it requires 220V. Wish they made one for the NA market place.

[@jamesbrunk9817]

Stockroom Supply in Ontario, Canada.

[@HookedonWood]

I can understand. I do not believe they plan a 110V version. I believed this is technically not possible.

[@silverbackag9790]

​@@HookedonWood Yep, the three motor one would not be possible as that would be 25 amps at 120v. Biggest commonly available 120v circuit is 20 amps and most are 15 amps. The two motor one would be 16.7 amps at 120v and would be possible but would be over the rated wire gauge and breaker that many people would have. The single motor one looks like it's a glorified shop vac. I don't think the lemon is worth the squeeze either. Go 240v and halve the amps.

[@ninopassaquindici6640]

Everytime I wonder!

[@pieterdesmijter420]

Waar heb je de cycloon gekocht? Dank!

[@HookedonWood]

Deze komt bij Gereedschap pro vandaan.

[@thenakedsuperhero1926]

You should genuinely be selling some of your designs as actual products. They are entirely too clean and quality. Leaps and bounds beyond what companies try to do

[@doitmyselfrunza]

I'd buy one tomorroe

[@rawknee04]

Count me in as a customer

[@user-nx3zk5qi8t]

I’d buy the silent box in a nanosecond

[@BiglinesNL]

which cyclone are you using?

[@HookedonWood]

Yes, good question, it is in my description now. www.oneida-air.com/dust-deputy/dust-collector-kits/super-dust-deputy-4-5-inch-cyclone-separator

[@silverbackag9790]

I wonder why Camvac doesn't offer a 3 motor wall mount version?

[@HookedonWood]

No idea what the thinking is behind this.

[@silverbackag9790]

@@HookedonWood I just read that they couldn't design a bag mechanism that wouldn't collapse with the three motors. I think they "couldn't" build one at a viable price point. I really wasn't aware of these at all until I saw your recent video. Still trying to decide how I want to go. Leaning toward a three motor camvac plus a cyclone. Since I'm completely offgrid (albeit with a big solar and battery system), I'm attracted to the ability to turn off or on three different motors plus it keeps me from hitting the inverters with outrush current all at once. But I digress.