How To Cut Counterbores On ISX Cummins CM871

[@jaywyatt7476]

Glad to see you trying it out. Cuttin Counterbores never get old. Thanks for the shout out, I like your style man. No drama no theatrics, just good ole boys doin there thing.

[@yourdieselspecialists]

Appreciate your nice words! Thanks for watching!!

[@wbball15]

Joe Eves sent me

[@shawnrice7179]

what sizes of shims do the make for the isx? Can you get .010 thousandths? or is .020 thousandths the smallest shim they make?

[@yourdieselspecialists]

.020 is the smallest one. So you have to go at least .020 to be able to shim back up to normal height! Thanks for watching.

[@zacb7427]

Understandable but you never mentioned that their are two types of sleeves\ liners one is a 150mm and 152mm both have different colored seals one is pink and one is blue they are not interchangeable as long as the counter bore isnt .0001-.0005 off then no need to add shims when the wrong size is put in the bore they absolutely will move in the bore and the life of it will drastically decrease.

[@yourdieselspecialists]

This is a video about cutting counter bores. Nothing to do with the size of liners. Yes there are two different liner sizes. The point of this video is specifically cutting counterbores. Thanks for watching!