How to cut down an internal hollow door

[@donjiskra9096]

Its Aug-2023. Today I bought at Home Depot in Fishkill, NY a cheap hollow core door. I did exactly as you did in this video. The door construction was almost identical to this, same cardboard honeycombs, but not wood on the bottom strip, something made of papery fibers, but wood-like. This was so easy its ridiculous. Need to mirror an existing 28" x 77" door and this saved a lot of money from not having to buy a solid core door. Thanks Bill!

[@billshowto]

You’re welcome 👍

[@Wildbear28]

Orange County, NY..fixing to do the same.

[@BigTrev]

Finally a good video that’s not an hour long

[@michaelmartinez900]

Finally!!! This is the first video I've been able to find about this issue which doesn't require a table saw. Thank you.

[@gordon2000k]

First rate instructional video. To the point and well lit and produced. Thank you.

[@Bilal_El-Hassan]

That's actually genius Billy, great tip thanks

[@billshowto]

👍

[@tomwhalley5719]

Great video. A joiner left the honeycomb exposed on bottom of my door so after seeing your video I bought a piece of timber, cut it to size and glued it in. Door back to full strength and protected from moisture.

[@MarkUfert]

This video saved me a lot of time and money . Thank you!

[@billshowto]

👍👍👍

[@ohwilbur1]

I was nearly put off by the sound quality, but the demonstration in this video was excellent Thanks Bill!

[@KEITHMAYOR7]

Thanks! Easy instruction and to the point!

[@VinnieCamilleriMusic]

Brilliant video Bill.

[@timmckennariey3690]

Great video, Bill. Thanks for sharing 😊

[@davetarleton8030]

Thank you excellent video and info

[@zacj63]

Very clever way. Thanks, Bill.👍👍👍

[@billshowto]

👍👍👍

[@samuelplew5630]

Good info thanks. I’m using cut down doors as shelves. This will help me fill the ends for strength.

[@billshowto]

👍

[@andrewromero59]

Thank you for sharing this, it’s a great video

[@johnlarro6872]

Thank-you! Really appreciate this view inside the door. I just bought a house and most of the doors do not shut properly. Everything I've read says to sand the door jam, but the doors are all crap, and when I have the money / time I'll probably replace them, but in the meantime, I am going to sand the doors down so they stop hitting the jams. I was worried about how much I could actually sand, but seeing this - I can see I have plenty of room for what I need. CHEERS!

[@stevenellul3443]

Thanks Bill awesome material and advice mate cheers. Thanks

[@billshowto]

You’re welcome 👍

[@TheRealMrCods]

Great information Bill, I have wondered how you would shorten a door and now I know. 👍

[@billshowto]

👍👍👍

[@jamalbenthall151]

Great video, thank you 😊

[@adcashmo]

Great video, nice one Bill! Just what I was looking for. I'm planning to cut some Ikea PAX wardrobe doors in order to extend a wardrobe to the ceiling. This technique will work for sure!!

[@stephenwhitemore1519]

Thank you for your time and effort to show this video, most appreciated. Stay well stay safe 😂

[@moniquem783]

Well. If I’d seen this 9 years ago I would have altered my bathroom door so I could have had a mat in front of the shower. Selling up soon though so I’ll leave that for the next owners and remember this for if I need it at my next house 😊

[@labossert]

This saved me so much frustration! Thank you!

[@darrenmcharg7731]

Thank you. Helpful video.

[@MARIOBAHAR69]

Best skill for videos sir 👍👍👍♥️

[@CocoChanelle-1]

Very neatly done!

[@nerinat8371]

Awesome idea and job

[@jeffbradley8783]

Nice work mate

[@sw86241996]

This is a good one. Thanks Bill

[@37mmOHIO]

Brilliant! Also, a simple brad nail through each side would secure that bottom insert if you don't want to use glue. Great video!

[@trentwood1449]

Pretty sure that's what he did.

[@keza41]

Great work as always.

[@Allison-405]

Thanks legend !! From Allison

[@manuelpolanco7132]

Could you please see if you are able to make a video on how to repair a chipped Tile. I have one with a small chip. I cannot replace it.

[@satyadaschristian118]

Nice 🎉

[@usman_oz]

What is the trick/tip to get dead straight cut using circular saw like how you did it

[@jcire4785]

What do you do about the original lock position now that the standard ergonomic height for the door handle has been reduced? It's my understanding that hollow doors have a block of wood inserted in that area to allow installation of a locking mechanism. I'm assuming this will no longer match the position of the strike plate and keep of the door frame.

[@billshowto]

The lock position dosnt change. The door has simply been shortened at the base to allow for new carpet or other flooring 👍

[@jcire4785]

@@billshowto thank you for replying on this

[@billshowto]

You’re welcome 👍

[@Aditagain]

Can this be done for width? My door is 29x79

[@ScreamingEagleFTW]

can you do that to make the door narrower also? My door is 24 and 1/16 inches and the opening is 24 inches.. How much do I need to remove? The door knob hole is already drilled but the hinges are not chiseled out yet.

[@aceboy8613]

Thank you

[@fulana3456]

I'll much rather buy a piece of that whats the exact thicknes size 1-1/8 or 1-1/4"

[@PuseletsoMokheseng]

What is the tool used to cut the door called?where can one buy it?I have zero experience and I'm DIYING my home

[@Hargvhjhfh]

Circular Saw or Skill Saw. Same thing!

[@andreasbaglamopektis3584]

Thanks for the video Bill, very well demonstrated. I am looking to remove about 5mm off the bottom to clear new carpet installation. Do think planing or circular saw is better? Any issues with taking off this amount in terms of door frame stability? It’s just an indoor bedroom door. Thanks in advance!

[@billshowto]

If you have a steady hand use a circular saw, if not use a planer. General full height of a door is 2040mm. Measure the door first to make sure you have enough timber to remove. 👍

[@colinprice1673]

Can you do this with the length too? I need to 70mm off the length??? Great video by the way mate

[@andreasbaglamopektis3584]

Much appreciated!

[@Csonka_Would_Run]

Sweet thanks!

[@davidjohn6742]

Great. Thankyou

[@silviudicu664]

Thanks!

[@jonathanthechristian5558]

Thanks 😊

[@victoriajackson2584]

Awesome 👏

[@billshowto]

👍

[@georgiabozikis1025]

Hey Bill, thanks for sharing this video. Can the same method be used to cut the door vertically (make it thinner rather than shorter)? We have some roller doors in our wardrobes that I want to convert into regular hinged doors, but they overlap each, so I'd need thinner doors. Thanks in advance for any tips! 🙏

[@jasonh396]

I’m not sure if you’ve already shown this, but can you show how to fill in the old lock hole and reposition it? This would be a useful trick in those circumstances where it is necessary to fix an old Lock That might be a bit flogged out.

[@billshowto]

I’ll add it to my to do list 👍

[@bikerchrisukk]

cheers mate, amazing what you can find on t'internet and it sounds like it's from Ozz (don't kill me if you're a Kiwi lol!). I've gotta cut 4" off a door and this'll work a treat👍

[@billshowto]

You’re welcome, Australia it is 👍

[@bikerchrisukk]

@@billshowto Bonza pal 👍 (bro in law is from Ozz)

[@316djking]

THANX bro saved my ass.

[@erizzle67]

I’m about to cut one vertically and transform into two little doors. Currently a full size door opens into a tiny bathroom and it’s ridiculous.

[@Bilal_El-Hassan]

Yeah Billy

[@humansaremortal3803]

I hope that was the top side of the doors... Otherwise, if it was the bottom side, then the knob goes further down... :D

[@stevecrump1375]

I think you cut the top of the door ...Bill ..not the bottom 😃

[@billshowto]

Lol it’s exactly the same, this was one of the old doors. Good attention to detail 👍👍👍

[@stevecrump1375]

@@billshowto only joking. ..Easily done though. .😃👍

[@hongminluo4896]

👍👍👍👍👍

[@Harry_Bl44346]

Never knew this

[@TapelessDrywallFinishing]

👍👍

[@billshowto]

👍👍👍

[@justinkearney1131]

And here I am paying $60 for a piece of cardboard and cutting it down to size because of kids knocking holes in doors…

[@joankeyes2696]

Bill you are the man. Will you marry me?🤗

[@vc8160]

Fair enough Bill, but just buy a door that is the correct size with small trim work. These hollow doors are cheap mate

[@billshowto]

Doors a made at a standard height of 2040mm. Sometimes they need to be shortened to allow for carpet , raised floors ect..

[@NYX_003]

My house is so old.. the measurements of the door frames are all non standard sizes....its the worst finding the right door size at bunnings..

[@chipmhandle]

Would have been a whole lot easier just to rip a new piece from some stock

[@evilkittyofdoom195]

Nice !