Great tip and worked perfectly for me! For those of your other clumsy viewers like me; if the spring disappears in your garage when you take it out a spring from a retractable pen is the perfect replacement!
@nopenheimer5 ай бұрын
On my trimmer they added a block of plastic on the main body that mostly fills the area your rock goes, and I recalled your comment about vibrations, so I tried a much smaller weight - worked perfectly. I found a small galvanized angle bracket and cut the off a piece about 1/8 long, fits right at the very end of the place your rock is. Because that arm is longer than the originally weighted one it didn't need to be larger - and look how small the stock weights are to start with. I also added a dab of hot glue to the hole the spring goes in so I don't lose it, because I always lose such things. Thanks for posting this! Great solution to a real annoyance.
@nrnoble2 жыл бұрын
Thank you. This has been a very frustrating feature of my trimmer. Clearly its been a problem for a lot of other owners, and likely the majority of owners. Puzzling that they did not design it in such a way that auto-feed could be disabled without resorting to DIY hacks.
@pl2996 Жыл бұрын
Yup this design is so stupid. How did it pass Q&A?
@aznravensdrive5900 Жыл бұрын
weed wacker companies are getting paid by the weed wacker string companies probably
@dfgdfg_ Жыл бұрын
Genius! Worked for me. I chose a pebble that didn't poke out of the grey tray so it stays laying flat. I like the idea I can simply reverse the change if I want to. Thank you!
@maptap6654 Жыл бұрын
Trimmer line companies HATE him ;) For the people in a hurry, I just overstretched the auto feed spring before I reassembled, left everything else as is. Seems to make the auto feed more reasonable. Bonus points if you find a much stiffer spring with same length and diameter, "fix" would likely last longer.
@steveandlindac56242 ай бұрын
My autofeed stopped working and your explanation of how it is put together enabled me to fix the problem. Thought I would have to buy a new one. Thank you
@stevenmyers36472 жыл бұрын
Brilliant! I'm doing this tomorrow. This makes more sense than any other idea I've seen so far. Thanks.
@MaciejPiotrowski2 жыл бұрын
Thank you. I tried different things but simpler is always better.
@ryanmaxwelll27302 жыл бұрын
I went a little further and wound heavy gauge copper wire into a coil, then forced it into the gap where it expanded against the sides. After that I added a little epoxy to cement the counter weight into place. Thanks for this great tip.
@MaciejPiotrowski2 жыл бұрын
I'm glad I could help.
@fuji8410 Жыл бұрын
Just bought a 18v trimmer and that auto feed is crap and wastes so much string it was running me nuts. Thank you for the fix. Now I can use the thing.
@joeguinta16692 жыл бұрын
Thank your for this idea. I'm So frustrated with this whole design. I tried the double blade attachment and what a joke that was. Do Not waste your money. Can't wait to try this trick
@iDrinkJuggy4 ай бұрын
Old video but this is so simple but genius. I was using the notch method which was a minor annoyance, but this is so much better, thank you! Also another tip for everyone, soak your spools of string in water. They wont break as easily and last much longer
@MaciejPiotrowski4 ай бұрын
Great to hear!
@waltercreuco5520 Жыл бұрын
Why can't you put a stronger spring in. Wally
@ActusXD2 жыл бұрын
Very handy thankyou! Just got one of these and I do not want to use 10,000 meters of line all the time.
@solarenergynow08 Жыл бұрын
Best advice..will definitely try it.. i use the 40v which is a different design. But now will go back to the 18v that is lighter and ok for most jobs.
@jamesbartsch43833 ай бұрын
Works great, thank you so much!
@joecmarques Жыл бұрын
If you have kids, borrow some of their modeling clay or Plasticine. It can then be perfectly form fitted nice and flush inside the plastic piece, and you can easily adjust the weight being added this way as well by adding or removing some to get it well balanced.😉
@AddisonProductions5229 күн бұрын
wow dude good stuff! 👍 👍 thank you
@LovesGrilling2 жыл бұрын
Wow. I'm doing this right now. Brilliant.
@kilblaan Жыл бұрын
Ryobi has redesigned things slightly and there is now a rectangular piece of plastic on the base which blocks adding a counterweight. Suggestions?
@kilblaan Жыл бұрын
Just removed the piece of black plastic with my Dremel drill. I crazy glued two flat square nuts into the grey plastic insert. The counter balance works perfectly! String can now be advanced as required by pushing the grey piece that sticks through the housing 🙂
@markalanpeterson Жыл бұрын
I used a Phillips bit end you use for a drill about 1/2" long, fit in there perfectly, and did work, I just bout this at a garage sale and the cut off blade is busted off, so it was basically unusable, thanks!
@harryhalfhead5 ай бұрын
Great video. I'm doing this right now before I've even used it for the first time.
@jrrock5574 Жыл бұрын
I used 2 hex nuts with tap and it works great thanks for the help!
@edlabois51152 жыл бұрын
Great idea, thank you so much.
@condoguy810 Жыл бұрын
This is an awesome tip. Two thumbs up👍👍
@zuzuspetals83232 жыл бұрын
Thank you, Sir! Great tip. 😉
@balkangaming87082 жыл бұрын
Lmao 🤣 not what I was expecting bro
@jarog30162 жыл бұрын
Just got a Ryobi trimmer and will try the fix. Have not opened the box yet. Just wondering if you think a stronger spring at the back might also solve the auto feed issue, and keep the trimmer from vibrating?
@MaciejPiotrowski2 жыл бұрын
I think it may work. Let me know how it works. I just don't have stronger string to try.
@YoungerthugggАй бұрын
@@MaciejPiotrowskican confirm, a stronger string did not fix the issue
@dennisstoddard20082 ай бұрын
YES!
@kyleparker9942 жыл бұрын
Awesome!! Thank you!
@MaciejPiotrowski2 жыл бұрын
You're welcome!
@jeff-freehoke8012 Жыл бұрын
Thank you. Very helpful
@gavinmanchester2421 Жыл бұрын
Couldn't you just remove the plastic switch altogether
@miken81502 жыл бұрын
My Ryobi trimmer's auto feed disabled itself after a few months of use, the white button got stuck so it doesn't auto feed anymore. However, when I need more line I can still push it and pull out more. Apparently this is common...whether it's a problem or not depends on your preference!
@MaciejPiotrowski2 жыл бұрын
How did it got stuck? I want mine stuck.
@miken81502 жыл бұрын
@@MaciejPiotrowski Not sure...appears to be distortion of the black housing. You could probably do this intentionally by wrapping some masking tape around the button where it comes through the housing. But really all you need to do is run the line through two of the holes on the string holder and it won't be able to feed itself without you pushing the button and pulling on the line.
@damianminds Жыл бұрын
@@miken8150 could you show that ona a video? It will be useful for other users
@miken8150 Жыл бұрын
@@damianminds It's in the video above, go to 1:14, he's pressing the button. While pressing the button pull out the string. Then release. Depending how much you need you might have to do this 2-3 times.
@aaa-tb4jr5 ай бұрын
Get a stronger spring
@Mike-li5yq4 ай бұрын
A spring from a retractable pen/biro is ideal.
@LowLuvR1179 ай бұрын
i can't put a rock there its a piece that want let it put it back down
@SpadeAce Жыл бұрын
There’s another way to do it and it’s MUCH easier than this. Drill a small hole across the protruding end of that grey piece and put a tiny machine screw in it. The weights don’t do anything to solve the problem.
@kilblaan Жыл бұрын
How does adding the machine screw work versus the weights?
@LarryRichelli5 ай бұрын
I guess I am not the only one that does not understand what SpadeAce is saying here,
@SpadeAce5 ай бұрын
@@LarryRichelli go ahead and try it the other way. Add the weights and watch what happens. It won’t work. It’ll act like it wants to work, but in essence it just won’t work. You’ll have the exact same problem moving forward. By adding a machine screw you lock the plastic piece in position, allowing you to disable auto feed without it accidentally enabling over and over again whenever anything touches the plastic. It isn’t rocket science.
@SpadeAce5 ай бұрын
@@kilblaan firstly, you don’t need to glue in weights and hope they stay in place. Secondly, my fix actually works and is a permanent solution. Weights is a temporary solution.
@ferret13sj2 ай бұрын
I don't understand your method either. Do you have a video? Can you still manually advance the string by pushing the gray piece?
@aznravensdrive5900 Жыл бұрын
weed wacker companies are getting paid by the weed wacker string companies probably
@alanm.brashearsr.666 Жыл бұрын
Thanks I’ll try that ! What moron designed this trimmer ? I prefer a bump trimmer ! Thats why the guy at Home Depot tried to sell me extra line !