How to do a Oil Change on a 2014-2024 Yamaha WaveRunner (All models.. GP1800R, FX, VX, EX,) 1.8L

[@emotionalnugget433]

Wonderful vid, just what I needed eh!

[@seanalmeida9191]

The second guy needs more video appearances he tuff Fr Fr

[@davidatwell5282]

Great video, When you replace the oil filter and new oil, the dipstick level won't be accurate until you run the engine to get the oil into the new oil filter.

[@mitty7578]

Nice video guys. Clear and concise.

[@audiophile5711]

Thanks, super informative video!

[@iriediver808]

DONT add in all the oil thats in the kit. Your manual will tell you how much oil to add (with or without oil filter change) when finished your oil level should be between the min and max markers on the dipstick. Great video.

[@ryanconn2761]

Good video, does anyone know if Ryco make a direct oil filter replacement for the Yamaha one?

[@philmark1788]

You should warm the engine before removing the oil. You should also NEVER add more oil than you took out. You should run the engine after to circulte the oil to then measure. You should lubricate the gasket on the oil filter. Also, using a plastic soda bottle as a funnel workes better, it screws into the engile filler.

[@Joe_Mission]

If the oil was low, you should add more than you took out.

[@schtinerbock4570]

What trailer do you have that on that it sits so low. My waverunner sits super high on the trailer

[@SimicBros]

They are on a jetski dolly which makes it sit lower and take up less space in the garage

[@latamexports9637]

u need to warm up the engine first before doing an oil change then start the engine and measure it when the engine is warm otherwise would give wrong oil measurement

[@dmihovilovic]

Why does it matter giving that you are going to replace all oil anyways?

[@philmark1788]

@@dmihovilovic more will come out. Warm oil is thinner.

[@ramezamine1444]

can you run the engine dry tho? not being in the water i mean

[@philmark1788]

@@ramezamine1444 out of the water only 30secs max without the hose. More than that you need to connect a hose to the flush port. Start the engine BEFORE turning on the water. Turn off the water BEFORE stopping the enngine.