check out this video for painting model faces kzbin.info/www/bejne/lXWahKyidquLiNU
@dr-onestuffido2 жыл бұрын
Superb explaining thank you 😊 I’m just about to get started on painting 3d printed figures and I’ve just about watched all your videos. So easy to learn from you, I’ve also ordered the fairy flesh paints as you so often use. Thank you for sharing all your techniques superb work and the best I’ve seen on KZbin 👍
@Groundeffected2 жыл бұрын
Thank you man. Those are such great encouraging words to read. Hope your journey goes well and remember to come back for more ideas and information about this weird hobby. Haha
@dr-onestuffido2 жыл бұрын
@@Groundeffected you can count on it 👍🏻 thanks again
@markmorrissey94442 жыл бұрын
So glad I found your channel, think you're looking at one more......
@Ultimaniacx45 ай бұрын
I kinda miss this kind of presentation. Without yelling and punctuating every sentence with *EEEHHHH*
@tuckerlibby3 жыл бұрын
Great job, hope to see more painting videos.
@Groundeffected3 жыл бұрын
Thanks 🙏 hopefully I can keep finding time to produce them.
@ondrejnovotny20733 жыл бұрын
Amazing work, keep going. I print figurine like your and I would Like to learn how to paint them... you explain it very well 👍
@Groundeffected3 жыл бұрын
Thank you. I’m glad you can to watch it !! And I hope there was something you were able to learn
@jaanikaapa69252 жыл бұрын
Glazing really is a great way to paint. When I work in digital I glaze there too. It's always easy to put more on, it's really difficult to remove it.
@Groundeffected2 жыл бұрын
It’s a amazing technique
@actormikelogan2 жыл бұрын
Thanks for this info!
@Groundeffected2 жыл бұрын
No probs dude.
@GenesisAsis_Art3 жыл бұрын
Absolutely love this bro!
@Groundeffected3 жыл бұрын
Glad you like it!
@rodrigodasilva262910 ай бұрын
Awesome!
@jimallen43823 жыл бұрын
Impressive
@aberodriguez41494 ай бұрын
👍👍👍
@3DHP3 жыл бұрын
Great Video, Thanks for sharing, I subbed.
@Groundeffected3 жыл бұрын
Thanks very much
@MushyFunguy3 жыл бұрын
Holy sh*ttttt that's an amazing job
@Groundeffected3 жыл бұрын
thank you!
@MadAl373 жыл бұрын
Very informative video, the hair on that model was also amazing. Keeping doing content like this and I’ll be here all the time. Question. Do you have a link for the Tom Holland Spider-Man model you have done an amazing job on? I’d also like a link to the Wanda model!! Keep up the amazing work Sir.
@dkev0012 жыл бұрын
So what about actually using glaze to thin the paint. From what I understand, that makes the paint more transparent with out loosing pigment?
@johncnyc783 жыл бұрын
Amazing i need a sponge pallet now
@Groundeffected3 жыл бұрын
Should’ve had one all along!
@johncnyc783 жыл бұрын
@@Groundeffected i never knew but these are great
@yansmac47962 жыл бұрын
This was really, really helpful. Thanks. Just need to put it into practice on a miniature scale instead of statue scale…
@Groundeffected2 жыл бұрын
Hope it helps. I will be doing some miniatures in the near future so stay tuned for that!
@yansmac47962 жыл бұрын
@@Groundeffected well if you want to do a tutorial on Scarlet Witch from Crisis Protocol I would be happy. 🤣
@normansyukran58353 жыл бұрын
great job, hope you can share with us with technique to paint skin color of face and body. Sometimes I confuse which part need to put shade and highlight. Plus, the colour mix for skin tone and washes was quite confusing. Thank you
@Groundeffected3 жыл бұрын
I will try get to that video one day. It’s a complicated one to make but I have some ideas. Thanks for watching!
@Lurker1222 Жыл бұрын
Amazing work as always. I do have a question though. I'm using craft paints as the more expensive paints are kind of out of my reach at the moment. One thing I'm always confused about is what situations to use. Matte, satin, gloss paints. I know a lot of it is common sense but when it comes to skin I'm always confused. I've been using matte on skin but to me it always ends up. Just looking really dry and not really how skin is supposed to look. Can you help me out with that?
@Groundeffected Жыл бұрын
kzbin.info/www/bejne/imTCfnaufpt7iNk check this video out dude. Also don’t matter what kinda of finish you can just add a new finish at the end with a clear lacquer
@JesusIsKing3732 жыл бұрын
You mean spaghetti in salmon biltong😜😁😁😁
@Steve_makes_stuff2 жыл бұрын
heya GE liking your videos, this painting sponge device you have what's its proper name trying to source one, GW maybe?
@Groundeffected2 жыл бұрын
So you mean the pallet?? That’s a wet pallet.
@toxictimis2172 жыл бұрын
Did you scale up and key the C27 model ? What software did you use for the scaling and keying of the figure?
@Groundeffected2 жыл бұрын
This is the scale Genesis made her dude. A while back he made this model as a 1/6th scale model it might still be available to purchase check with c27
@toxictimis2172 жыл бұрын
@@Groundeffected ahhhh okay will do! Thanks for the clarification
@rizencomics91452 жыл бұрын
@@toxictimis217 wondered the same thing. they seem to only have 40mm minis now
@Catuleba2 жыл бұрын
Aw man... that creator is no longer on patreon, only minis (as far as I could see)...
@Groundeffected2 жыл бұрын
Yes but those models are still available in n his cgtrader or gumtree I can’t remember which but they’re still available to buy.
@kennethgrey20098 ай бұрын
I know this video was about glazing, but what colors did for the basic model?
@SunWoodMC2 жыл бұрын
Are these models resin printed ? Would this quality be possible on fillament printers? Been wanting to get a 3d printer for this stuff but i lack a well ventilated space, so no resin for me :(
@yakcatdrifter68202 жыл бұрын
How much to make same Wanda I have a straight A+ girl with a bday coming up and this is her favorite person please kind sir. Thanks and god bless
@Groundeffected2 жыл бұрын
Email orders@groundeffected.com for more info on commissions
@yakcatdrifter68202 жыл бұрын
@@Groundeffected I did and there was no answer ?will try again
@djjhon78102 жыл бұрын
amigo que configuracion me recomendas tengo la impresora creality halo-sky gracias.. like
@pressstart-fighterstickarc2583 жыл бұрын
beautiful where can i buy this stl?
@Groundeffected3 жыл бұрын
Thank you. The link for the sculpt artist is in the description. Let me know if you have trouble finding it.
@pressstart-fighterstickarc2583 жыл бұрын
@@Groundeffected I found. but I don't know which plan to subscribe to or have access to this collectible
@Sesu22Ай бұрын
can tell you're a legit south african with "if you don't like it, just fuck off" hahahah
@davidallandavies5 ай бұрын
Hi, I’m trying to get an STL file made of a bust from a photograph. Do you know anyone who could possibly do this for me within your contacts. Thanks Allan
@TrippyyTreyyy6 ай бұрын
the link to this model is no longer valid is this model still available ??
@Groundeffected5 ай бұрын
The sculptor changed his approach he does minis now. Search for c27 collectibles I think it’s still available
@dickpeter35333 жыл бұрын
Have you tried to use pastels as an alternative to glazing?
@Groundeffected3 жыл бұрын
I have tried pastels, but they don’t do the same job as glazes for me