What if your fuel pump is dead but you still need to drain tank?
@hoodratsgarage77Ай бұрын
Then you'll have to remove the fuel tank from the vehicle and either pour it out or siphon it out once the fuel filler neck is removed (that is what is limiting you from being able to siphon)
@rickwagner3797Ай бұрын
Worked for me on my Durango. Thanks!
@hoodratsgarage77Ай бұрын
Awesome, glad to hear. Thanks for watching a commenting
@smackerindignity9 ай бұрын
So, you can't bypass the relay by connecting a wire to the fuel pump relay terminals in the fuse box? (Essentially running the FP non-stop)
@hoodratsgarage779 ай бұрын
I wish it was that simple. Chrysler engineers had the smart idea of making the fuel pump relay an integral part of the "total integrated power module(TIPM)." From my understanding, it is basically inside of the fuse box and if it fails, the dealership replaces the entire TIPM. Such a dumb design...gotta love those engineers.
@johnmiller426Ай бұрын
what you are calling a fuse box under the hood is a tip module you can use a good scan tool to access it and run the fuel pump .
@hoodratsgarage77Ай бұрын
Yes, some scan tools can possibly do it, this how ever was demonstrated for the everyday guy who doesn't have access to a higher end scan tool. My autel maxisys wouldn't do it unfortunately.
@flavanationJ3 ай бұрын
How much did you charge
@hoodratsgarage773 ай бұрын
An hour of labor. Any where between $100-140 per hour for shops around my neck of the woods. Thankyou for watching
@turkeysandwhichwithcheese34226 ай бұрын
Any way to manually drain??? It i took off the rubber hose still cant get the siphon in there so close to just drilling a hole in it cause i dont see any way around it the fuel pump has failed
@hoodratsgarage776 ай бұрын
Sadly no. They really wanted to keep people from siphoning gas. Such a pain in the butt. Best of luck
@zeke48814 ай бұрын
Thank you so much.. I am currently using this method.
@hoodratsgarage774 ай бұрын
Glad it help you out! Good luck!
@utahyork33382 жыл бұрын
I thought the diesel pump nozzle was too big to fit into an unleaded truck's filler neck? I'm not sure since I don't have a diesel vehicle.
@hoodratsgarage772 жыл бұрын
Yah! Way too big, the poor girl had to hold the diesel nozzle there just outside the rim of the gasoline tank mouth to fill it the entire time...
@patrickparker8025 ай бұрын
What size hose did you use? Any special fittings or just slide hose over?
@hoodratsgarage775 ай бұрын
Dang... I can't remember the exact size...if I were to guess it was either 3/8ths or 5/16ths. No special fittings, just sliding it over. Thankyou for watching!! Hope your project goes well
@patrickparker8025 ай бұрын
Thank you, ill give it a shot
@patrickparker8025 ай бұрын
It was 3/8” hose if you wanna add to the description. Worked like a charm. I still have issues. Replaced spark plugs fuel injectors fuel pump o2 sensors front and rear, new cats, new ignition coil packs im not sure what else to do maybe MAP sensor? I changed all the fuel today. Running rough at idle takes alot to get it up to 75mph, slight white smoke at revs smells a little funny. My fuel vapor canisters are clogged surely thats not it.
@RodCalidge7 ай бұрын
You can put diesel in a gasser. Just not the other way around.
@hoodratsgarage777 ай бұрын
Yah, gasoline in a diesel doesn't end well. Those high pressure fuel pumps don't last long without the lubrication of the diesel, and things tend to go boom