How To Drill Very Hard Materials at Home...CHROME, STAINLESS, Broken Taps or Screw extractors

Now you can remove broken taps or easy outs/screw extractors along with drilling chrome parts. We share with you how and what to use to drill the hardest materials know to man.
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd...
We Guarantee you will love it.
If you would like to help us out.
www.paypal.me/...
***********************************************
TOOLS USED IN VIDEO
---------------------------------------------------------
Drill Bit amzn.to/3CnksBw
Drill Bit Set amzn.to/2xRUUjV
Cordless Hand Drill amzn.to/2J4iBrx
Vise amzn.to/2J3AOFV
Gloves amzn.to/3acMd27
Screw Extractors amzn.to/3dkhzpt
****The small compensation we receive from these amazon links helps to keep our channel available to you****
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZbin channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

[@stevenarnold4433]

My ex-wife's homemade cookies or carbide

[@SweetProjectCars]

LOL, thanks for the view and comment, made us chuckle this morning Steven! Hope you have a great day. mad Mike the hammer SPC

[@specops420]

LOLLOLOLOL

[@specops420]

LOLOlOLoL

[@brad2548]

Lolololololo 😂

[@cruzemissile5409]

Drill bits have soft shanks as do easy outs . Most tools have case hardened shanks but taps are heat treated tool steel and drilling them once broken is not this easy . Most times you can mill one out with carbide but one of the most effective ways is to EDM it out !

[@SweetProjectCars]

Thanks for the tips!

[@pageophile]

Very, very true. Differential harding is present on many tools. Still the drill bits are impressive. EDM is so awesome though!

[@tunafish3216]

Absolutely true the shanks are soft.

[@powerwagon3731]

My thoughts exactly.

[@anonymousreviewer2587]

@@CTX50 Electrical discharge machining

[@hfbpa8896]

Bought these but won’t even touch a Cobalt SpeedOut. What are my options? Update...sharpened the bit and I was able to drill out the broken SpeedOut and bolt. I don’t think I was using enough pressure at first. I am a very happy customer.

[@SweetProjectCars]

I can tell you this right now, there is no harder material than tungsten carbide, if that will not drill out your easy out then you are going to have to take it to a professional welding shop to have them remove it. Thanks for watching, hope this helps my friend. Have a great weekend. mad Mike the hammer SPC

[@hfbpa8896]

@@SweetProjectCars updated my post...they did the job. Thanks!

[@Anonymous-it5jw]

Thanks for this video. Using a spring-loaded center punch would ensure accuracy by eliminating the wandering of the drill tip until it catches. Suggest using Tap Magic for lubrication and heat transfer. Would appreciate your advice on what drill speed to use with these cobalt-type bits from 1/8" up to 1/2" diameter when drilling regular steel, high speed steel or chrome steel, and the appropriate amount of downward pressure to use when using a hand drill for these projects. If I understood correctly, one should not use an impact or hammer-type drill with these bits, because of their brittleness. Thanks again for an another informative and practical video. As an habitual breaker of drill bits, I need all the good advice I can get.

[@D2O2]

With your suggestions, i am surprised at your question.

[@leomufasa1402]

That's a cobalt drill bit

[@michaell397]

The clamping surface is not hardened anywhere as hard as the actual cutting surface of the cutting end. No steel or carbide bit can cut hardened steel. Hi-speed or Cobalt or any other steel. It will require carbide or diamond. However, these are very expensive and not meant to be used in a hand drill. they require a rigid setup. However,ther is another option. A carbide tipped masonry bit can be used in a pinch. However, have more than one as they tend to chip out quickly. KnifeMaker

[@SweetProjectCars]

We use this amzn.to/3CnksBw Thanks for watching and sharing, have a great week my friend. mad Mike the hammer SPC

[@eliasujashvili7113]

Tungsten?

[@SweetProjectCars]

It's this amzn.to/3CnksBw Thank you for the view and comment, have a great day my friend. mad Mike & team

[@DDGVET4]

unobtainium?

[@-mejor-que-nostradamus-6152]

Dewalt, Bosch, Makita, Garbage Drill Bits. For Metal Not Good These Brands. Amén.

[@SweetProjectCars]

Thank you for watching and sharing, have a fantastic day my friend. mad Mike the hammer SPC

[@jak3677]

Tungstencarbide

[@SmokeyA55]

Just ordered me a 1/8 bit on Amazon got a valve cover bolt broke off hope this will get it

[@SweetProjectCars]

Hello Jonathan, just be very careful that you don't move the drill bit, right, left, front or back. Keep it perfectly straight up and down because they are very brittle and can snap, especially the small ones like you have. Just take your time and you should get it. Thanks for watching and sharing, have a great day and all the best on your project. mad Mike the hammer SPC

[@brandoncharbonneau570]

Cobalt

[@MindKontrolleProject]

How do I Drill through Vibranium🛡? I tried a drop of nano-thermite but I cannot control the size of the hole.

[@SweetProjectCars]

A pound of C-4 and one really good det cord will punch a hole in anything you need a hole in mike :) Thanks for watching, have a great day. mad Mike the hammer SPC

[@cruzemissile5409]

Cobalt

[@TrojanHorse1959]

Solid Tungsten Carbide Drill Bit for Hardened Steel Edit: Thank you Mike, take care, stay safe, sane, and healthy

[@SweetProjectCars]

You got it, it's this amzn.to/3CnksBw Thank you so much for the view and comment, all is well here at SPC my friend. Take care. mad Mike & team

[@keng5170]

I’m guessing a carbide masonary bit 😷

[@SweetProjectCars]

It's this amzn.to/3CnksBw You got it! Thanks for the view my friend, have a sweeeeeet week. mad Mike & team

[@Superiorpowerwash]

Good video, thank you.

[@SweetProjectCars]

Absolutely, our pleasure to help. Thank you for watching and commenting, hope you have a sweeeet day my friend. mad Mike

[@youtubestolemyhandle1]

Thanks, I will give it a try.

[@SweetProjectCars]

Glad to help my friend! Thank you for the view and comment, have a fantastic day. mad Mike

[@anagorfranklin6466]

What type of drill bit is that, can it drill Hardox material

[@SweetProjectCars]

It's this amzn.to/3CnksBw It's drilled everything that we've put it to my friend. Thanks for watching and asking, have a great week. mad Mike

[@oto169]

Carbide bit, and you were drilling through the softest part of the drill and easy out, they are not as hard due to the heat treating and tempering. Try drilling through the other end and see if you have the same luck.

[@SweetProjectCars]

Oh, we've done it numerous times my friend. Thanks, have a great day and Merry Christmas. mad Mike

[@ryanmangru07]

Can this go through VG10 steel?

[@Goodsnout]

I'm guessing cobalt.

[@The340king]

Solid titanium?

[@williamcowell9141]

Tile cutter diamond

[@YodamboY]

carbide or diamond tipped?

[@SweetProjectCars]

You got it!! It's this amzn.to/3CnksBw Thanks for watching and for the comment, have a great weekend my friend. mad Mike the hammer SPC

[@YodamboY]

Thanks because I got a broken flywheel bolt and I broke a threader in the middle so I was just checking out carbide.

[@DanSimmons-s2f]

"Drill any Material" What so you can drill diamond with it?

[@gerrylundergaard60]

Very simply it is plain jobber carbide bit. A pro tip is to use the masonry grade for many reasons. Pay attention or pay cash!

[@SweetProjectCars]

Thanks Gerry! Have a great day my friend. mad Mike the hammer SPC

[@goodguygto]

Hey Sweet Project Cars!!!, I think you cheated!, with the drill bit!!!, YOU probably took it from Superman's Tool Shed!!!😂😂😂

[@SweetProjectCars]

LOL he said to make sure it was put back where I got it...he sounded like my father when i was 12 borrowing his tools :)

[@goodguygto]

@@SweetProjectCars LOL, good one!😂😂😂

[@timjackson5555]

I use the exact same thing but usually 5/32, 3/16,1/4" fits my knife scale pins. Try forgetting to drill O1 or damascus steel then harden it. Definitely buy pure carbide since you can sharpen it. & absolutely backcut the grind to reduce the drilling face surface. But, if you break one.. use a quality drift and punch them out (if have through hole) same for taps, drills, etc.. they are hard & shatter. Just need to be good with a hammer. 30 + years as a professional fabricator you learn these things. Now professional bladesmith.

[@picante01]

Wow. Sharp

[@SweetProjectCars]

We're with you on that Tim! Thank you for watching and sharing your great information, we really appreciate it, hope you have a fantastic day my friend. mad Mike

[@bobverhaagh8703]

So what kind of bit is that

[@SweetProjectCars]

It's this amzn.to/2y1dpCH and just remember, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching Bob. Have a great day. mad Mike the hammer SPC

[@MrV2u]

It’s made out of unobtainium. Lol great video my friend.

[@SweetProjectCars]

LOL, Thanks for watching and sharing MrV! Have a stupendous rest of your week my friend. mad Mike

[@hameljones3649]

Rescue bit

[@SweetProjectCars]

It's this amzn.to/3CnksBw Thank you for watching and commenting, hope you have a fantastic day my friend. mad Mike & team

[@alicegarrison5426]

Where I find that drill bit

[@SweetProjectCars]

It's this amzn.to/3CnksBw and just a reminder, all of the products/tools we use in our videos can be found in the .....More of the video description. Thanks for watching, have a great day. mad Mike & team

[@johnhall8455]

Sorry, chrome plated materials are only coated with microns of chrome, easy to drill through.. Drills and easy outs are softer at the gripping end…. TCT or Cobalt work well

[@SweetProjectCars]

Thank you for watching and sharing John, we appreciate it my friend, have a great day. mad Mike the hammer SPC

[@dummgelauft]

What kind of heartless individual "dislikes" this video?

[@SweetProjectCars]

Thank you for your kind words, good lookin out my friend. Have a fantastic day. mad Mike the hammer SPC

[@markbooth5983]

I think the drill bit you are using to drill these hardened steels is a correctly sharpened {Tungsten Stone Drill Bit}

[@SweetProjectCars]

It's this amzn.to/2y1dpCH Thanks for watching and sharing, we appreciate it Mark. Hope you have a great weekend. mad Mike the hammer SPC

[@markbooth5983]

@@SweetProjectCars Just had a look at the link on Amazon at the drill bits they are very nice and great value for money too at £14 pounds each they should get you out of frustrating situations when nothing else will do, I know they are gonna be developed from a top grade material plus there made in the good old USA so gonna have to invest in some of these for broken bolts many thanks I enjoyed watching your video keep up the good work !

[@flhandster4395]

So, which drill bits are the ones that can drill out most any broken off screws? Which link is it? Please clarify ASAP. Thank you.

[@SweetProjectCars]

FL, you can use amzn.to/2xRUUjV or amzn.to/2y1dpCH either one will do the job. Thanks for asking. Have a great day. mad Mike the hammer SPC

[@Kingdonnerkebab]

I miss all your tips and tricks for cars Mike.

[@SweetProjectCars]

Thank you very much my friend! We appreciate the view and all of our great subscribers like you, hope you have a fantastic week. mad Mike & team

[@kailanawilliams6441]

i need to know what is this bit

[@SweetProjectCars]

It's this amzn.to/3CnksBw and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@raybradley1502]

carbine

[@SweetProjectCars]

It's this amzn.to/3CnksBw Thanks for watching and commenting Ray, have a fantastic day my friend. mad Mike the hammer SPC

[@darellsunderlin4670]

Carbide

[@SweetProjectCars]

Yes, Darell! It's this amzn.to/3CnksBw Thanks for watching, have a great weekend. mad Mike the hammer SPC

[@williamwhitehead8362]

Is the machine repair man it's a solid carbide bit am I correct they are really good.

[@SweetProjectCars]

It's this amzn.to/3CnksBw You are correct William! They are the best we've used. Thank you for watching and commenting, have a great week my friend. mad Mike

[@dennisweaver3145]

Cobalt

[@SweetProjectCars]

We use these amzn.to/2xRUUjV Thank you for the view Dennis, have a great week my friend. mad Mike the hammer SPC

[@carrytrainer.editor3321]

Is that drill bit made of diamonds?

[@carrytrainer.editor3321]

Thanks for the drill bit tip... I need that.

[@SweetProjectCars]

LOL, it's this amzn.to/3CnksBw Thanks for watching and asking, have a great day my friend. mad Mike the hammer SPC

[@ahmedalli80]

Solid Carbide

[@SweetProjectCars]

Thank you for watching and sharing Ahmed, we appreciate it my friend. Have a great day. mad Mike the hammer SPC

[@splash5974]

Titanium?

[@SweetProjectCars]

It's this amzn.to/3CnksBw Thank you for the view and comment splash, have a great weekend my friend. mad Mike

[@csiautodetail]

Is call a rescue bit.

[@SweetProjectCars]

that is a great name for those bits!!!!

[@bigvicz]

Chinesezium

[@SweetProjectCars]

LOL, no, it's actually this amzn.to/3CnksBw Thanks for watching, have a great week bigvicz. mad Mike

[@harriestielstra9427]

I could say it's made out of adamantium, than again that's a made up metal, maybe a mix of (and I'm probably wrong) , steel, tungsten and diamond. Either that or carbide

[@SweetProjectCars]

It's this amzn.to/3CnksBw You got it harrie! Thanks for watching and commenting, have a great week my friend. mad Mike the hammer SPC

[@kjon7466]

Carbide

[@saltysteel3996]

Chromium is the hardest metal known in existence.

[@SweetProjectCars]

We beg to differ, it is tungsten carbide. Thanks for watching and for your comment. mad Mike the hammer SPC

[@-mejor-que-nostradamus-6152]

Do It The Ratchet Sockets And I Will See You Crying You Can You The Cheap Chromium Vanadium And You Can Not Make Even Tickles. Amén.

[@SweetProjectCars]

Thank you for watching, have a great day. mad Mike the hammer SPC

[@IndieGuvenc]

13 piece $288.91 wow beautiful, but I could still image me snapping those, I can snap anything esp the small ones. like toothpicks lol

[@richg8319]

Bro, have you been on vacation OR am I not getting notifications...Glad to see you again! Regardless!

[@SweetProjectCars]

We don't get vacations Rich :) When we do sneak away, we are still grinding the SPC! We've heard of a lot of viewers that aren't getting the notifications and we post a new video every week like clockwork! Anywho, thanks for watching, hope you have a sweeeeet week my friend. mad Mike

[@D3thM3tal]

Very neat and very expensive, but if you need it, you need it...

[@SweetProjectCars]

Agreed!! Thank you for watching and commenting, hope you have a great week my friend. mad Mike

[@tedgraham3119]

Carbide?

[@marcostreet3169]

Must be a tungsten carbide bit

[@oldiron4135]

Carbide endmill to make a flat top, carbide ball nose endmill to make a little dimple, then a carbide drill to drill it out. People always want to make things harder then it needs be. Oh, and shank on drills are softer then flute area.

[@SweetProjectCars]

Thank you for watching and sharing, have a great day. mad Mike the hammer SPC

[@Leonardokite]

I was gonna say "titanium carbide", but no.....I peeked below....."cobalt"! OH WAIT, the show more says tungsten steel and carbide. AND those puppies don't come cheap. Well that's quality for you. Probably beats the harbor freight set of 32 for $8 ;-)

[@SweetProjectCars]

LOL This amzn.to/3CnksBw is way better than those $8 ones Leonard! Thanks for watching as always, we really appreciate it, have a stupendous rest of your week my friend. mad Mike

[@damiencrowe714]

Metal

[@blackscotydog]

carbide.......I work in tool shop of plastic injection molding factory.

[@SweetProjectCars]

You got it! Thanks for the view and comment, have a fantastic day my friend. mad Mike

[@johnwagner8465]

Colbolt

[@SweetProjectCars]

It's this amzn.to/3CnksBw and just a reminder, all of the products/tools we use in our videos can be found in the .....More of the video description. Thanks for watching, have a great day. mad Mike & team

[@LightSpirit24]

Cobalt

[@zurdoremi]

the problem I have sometimes is the drillbit sliding / wandering from the mark.

[@stevenarnold4433]

First use a Center d o t

[@SweetProjectCars]

To keep your drill bits from wandering, there's a process use this first amzn.to/40tq1vx then use this amzn.to/3Srlfg9 and you will be able to drill a hole exactly where you want it to be. Thank you for watching, have a great week my friend. mad Mike

[@mogonz5399]

I can not see the full description for some reason. What kind of drill bits are this ?

[@SweetProjectCars]

It's these amzn.to/3CnksBw Thanks for watching, have a great weekend morgonz! mad Mike the hammer SPC

[@SlingbladeJim]

It's made of something stronger than whatever you're drilling into.....................................

[@SweetProjectCars]

LOL, yup! Thanks for the view and comment Jim, hope you have a great week my friend. mad Mike

[@J.T.19134]

Why is the bit $39.99. But the set is $28.99? Wouldn't I just buy a set of them??

[@SweetProjectCars]

The most expensive set is the highest quality and will last much longer, we like to always give our subscribers options higher quality vs. an inexpensive less quality choice. Thanks for watching JT. mad Mike the hammer SPC

[@ItodoVincentonah-xz9bz]

What kind of drill beat can someone use

[@SweetProjectCars]

amzn.to/3CnksBw this should help

[@AMERICANLEGENDModelBuilder]

Tungsten Carbide!

[@SweetProjectCars]

It's this amzn.to/3CnksBw Thank you for watching and commenting, hope you have a great week my friend. mad Mike

[@howardtoob]

Carbide bit. Makes the shrill sound of money being spent.

[@SweetProjectCars]

You can buy the other ones but you will never get the job done so I don't know where the cost factor comes in, carbide is the only one that will do the job. Thanks. mad Mike the hammer SPC

[@TheKellisunshyne]

Titanium. It's what I use at my plant which has 90% stainless steel (always fun to try to drill out using a cobalt) so one of my guys recommended a titanium bit and I've never looked back.

[@TheKellisunshyne]

I stand corrected😅

[@SweetProjectCars]

It's this amzn.to/3CnksBw they are all we use my friend. Thank you for watching and commenting, have a great day. mad Mike

[@davidroberts8210]

is the drill bit you used carbide or tunsten carbide i need to remove an bust bolt inside the car fram for my shock bracket so what do i use for this grade 8 bolt

[@SweetProjectCars]

It's this amzn.to/3CnksBw Thank you for watching and asking, have a great week and all the best on your project my friend. mad Mike the hammer SPC

[@CM-dp5mw]

In a pinch you can use a carbide tipped masonry bit.

[@SweetProjectCars]

thanks for sharing mike

[@stevenarnold4433]

Yes I have used masonry bits a lot you can drill through files or whatever you want

[@binagarten4667]

Just tell us the name of the said drill bit!

[@SweetProjectCars]

It's this amzn.to/3CnksBw and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@guillermonieri4203]

Thank you for the tip on the bit!

[@SweetProjectCars]

Happy to help my friend! Thank you for the view and comment, hope you have a sweeet day. mad Mike

[@ginpok6640]

Carbide. No lube. Except water only. NO OIL!

[@SweetProjectCars]

Thank you very much for watching and commenting GinPok. Hope you have a fantastic day. mad Mike the hammer SPC

[@unclebs4732]

Tungsten, the hardest metal there is.

[@SweetProjectCars]

You got it Unclebs!! Thanks for watching and sharing, have a great weekend my friend. mad Mike

[@gdcskates]

diamond carbide.

[@SweetProjectCars]

It's this amzn.to/3CnksBw Thanks for watching and for the comment, we appreciate the input, hope you have a fantastic week my friend. mad Mike

[@jeff7798]

Titanium nitride? Love the video btw

[@SweetProjectCars]

It's this amzn.to/3CnksBw and just a reminder, all of the products/tools we use in our videos can be found in the .....More of the video description. Thanks for watching, have a great day. mad Mike & team

[@hidayatkassim]

amazon does not ship to my country, any of you knw where i can get it shipped worldwide?

[@SweetProjectCars]

Your best bet is going to be having a friend or family member that lives where they can receive shipments to get it to you my friend. Thanks for watching and sharing, have a great week. mad Mike

[@markm.457]

Candime collbolt Some say titanium drill bit I use them to drill stainless steel

[@SweetProjectCars]

Thanks for sharing. Have a great day. mad Mike the hammer SPC

[@1970351c]

Nevermind location accuracy

[@SweetProjectCars]

Thanks for watching, have a great day. mad Mike the hammer SPC

[@1962CraigSuper]

Masonry bit

[@andrewwastien]

wish i would have seen this video 5 days ago, I filled some holes with weld to drill them to a smaller size and tap them bought 2 difrent sets of dwalt drill bits sets and a bosh cobalt m42 set and non of them could drill through the weld.

[@johnwagner8465]

Is the answer hidden

[@SweetProjectCars]

It's this amzn.to/3CnksBw and just a reminder, all of the products/tools we use in our videos can be found in the .....More of the video description. Thanks for watching, have a great day. mad Mike & team

[@grassroot011]

Carbide, Yay I win, win what? Used to work in a machine shop, knew this would be the case, thanks

[@SweetProjectCars]

LOL You got it grassroot!! Thank you for watching and commenting, hope you have a sweeeeet day. mad Mike

[@johnnyb1776]

Looks like carbide. It sharpens knives so ....

[@SweetProjectCars]

You got it Johnny!! It's this amzn.to/3CnksBw Thanks for watching my friend, hope all is well, have a great week. mad Mike

[@jamiegriffiths5629]

Carbide, try getting out a broken carbide drill lol

[@SweetProjectCars]

We've done it many times, all it takes is a little ingenuity and the right tools. Thanks. mad Mike the hammer SPC

[@bostontracy5151]

Looks like you’re using a carbide bit & got your drill slowed down to speed 1, for highest torque & lowest speed.

[@ronmroczenski3562]

The drill bit is Cobalt

[@SweetProjectCars]

It's this amzn.to/3CnksBw Thanks for watching and commenting, have a sweeeet rest of your week my friend. mad Mike

[@pablosurridge1225]

Cobalt

[@heathhill7802]

Funny, Hss with the temper

[@SweetProjectCars]

Thank you for watching heath, have a great day. mad Mike the hammer SPC

[@daviddavidsonn3578]

carbide, I knew it

[@SweetProjectCars]

You got it David! Thanks for watching and sharing, we truly appreciate it. Have a great day. mad Mike the hammer SPC

[@h.d.5288]

Cobalt but carbide is better.

[@SweetProjectCars]

We agree, cobalt is good but use carbide if you want the best of the best. Thanks for watching Horacio, we appreciate it my friend. Have a great weekend. mad Mike the hammer SPC

[@lamarc2634]

Its obviously made of kryptonite

[@SweetProjectCars]

LOL, it's this amzn.to/3CnksBw Thanks for the view and comment lamarc, have a great week. mad Mike

[@c.geezer8753]

Your link to get a bit like yours claims to be selling a MARS-TOOL bit. Can't find that company. What's up?

[@SweetProjectCars]

It's this amzn.to/2y1dpCH and it's an American company, not sure what you are talking about my friend? Thanks for watching. mad Mike the hammer SPC

[@c.geezer8753]

​@@SweetProjectCars Mike the hammer SPC What I'm talking about my friend is that I would like to talk on the telephone with either the U.S. distributor or the U.S. manufacturer of these miracle bits before I buy one. Your Amazon.com URL (amzn.to/2y1dpCH) does not lead a buyer to a U.S. telephone number or even a U.S. company name and street address. MARS-TOOL is the only brand-name-like or company-name-like word I can find at the amazon.com website, but MARS-TOOL does not yield any address finds, websites, phone number, or even registered business name through many google searches. Please, Mike, just give me the business telephone number or these bits U.S. distributor's street address and I'll be happy.

[@SweetProjectCars]

We purchase everything on Amazon, don't analyze until you are paralyzed, it's a measly 30$, if you don't like it, return it, make it easy on yourself. Thanks. mad Mike the hammer SPC

[@c.geezer8753]

@@SweetProjectCars OK. Thank you for replying to me.

[@reygannery3457]

its a handtap material

[@SweetProjectCars]

Thanks for watching Reygan, have a great day. mad Mike the hammer SPC

[@rcarioca]

I am using a 3/32 cobalt bit to try and drill through a 1/4 in bolt. Try as I my, the bit just does not go through. Makes a bit of a small hole but cannot go through

[@SweetProjectCars]

You need this drill bit amzn.to/2y1dpCH it's the only one that will work. Thanks for watching R HP, we really appreciate it. Have a great day my friend. mad Mike the hammer SPC

[@rcarioca]

@@SweetProjectCars unavailable at Amazon

[@Sinnicide]

Tungsten Carbide

[@SweetProjectCars]

It's this amzn.to/3CnksBw you got it my friend! Thank you for watching and commenting, hope you have a great day. mad Mike the hammer SPC

[@00nutt]

Carbide my friend and not a masonry bit.

[@SweetProjectCars]

Thanks for the view, have a great weekend. mad Mike