How to Drill Z32 5 Lug Rotors to Fit 4 Lug 240SX

Extremely easy walkthrough showing how to drill 4 lug 4x114.3 pattern in z32 rotors. Re drilling any bolt pattern is easy with a template.
If you need a different bolt pattern on another application, please reach out to me.
Template: drive.google.c...

[@theweich]

Helps a lot! Thanks

[@MindDezign]

Best video

[@joshneal2920]

What type of drill bit are you using? HSS, Titanium, Cobalt, Etc. Thanks and good tip with the template.

[@hell415razor]

Anyway you can make a template from 4x114.3 rotors to 5x114.3

[@S13xCrazy]

Agreed, this would be great for people going from 4 lug to 5 lug but not upgrading brakes!!!

[@HealthSupercharger]

This is what i want to do on my 4 bolt trailer hub and to drill a rim that already has a 5 bolt pattern on 5.5 inch diameter. I will try to do this so i can upgrade my tire size to 15 inch size.

[@Lewanlew]

Thanks! Did you drill a balance hole to compensate for the lack of a fourth drilled hole?

[@BraggenritesNetwork]

This helped me tons! Thank you!

[@RichardMoussa]

Thanks for the positive feedback!

[@Ryan-co3zg]

Could you make a template for 350z rotor in 4x114.3?

[@Randyrene305]

I have a question, are these for the aluminum or iron caliper? Unless if I’m doing them wrong, I don’t think it measure the same.

[@TeamR1sk]

Is it possible to do a 5 lug to 4 lug conversion on a 300zx z32?

[@tjallas657]

Nice video sir. Very informative. Do you have a tempate for 4x100 pcd?

[@Randyrene305]

Is this the same template for the 30mm rotors?

[@Randyrene305]

Also I tried using the template and it doesn’t line up properly

[@RichardMoussa]

I believe we spoke about this and you indicated the print was not to scale. The line on the legend needs to be exactly 2” for it to work.

[@jeromeramnarinesingh9434]

What did you use to drill the holes? Drill press?

[@Gongdeadman]

Did u not watch the vid?

[@emu55]

used your template and i still fucked it up lol but thank you i would have probably made it worse without the template

[@kaizenracingproject]

Do you have pattern for 4x100?? 🙏

[@ricardonunes7595]

I would like to know this as well. Did u end up getting an answer?

[@collinstephans6390]

hey are these the 12.75 inch rotors

[@RichardMoussa]

These are z32 turbo rotors. I never measured total diameter. Regardless the pattern and template would work as long as the bore is the same. The bore is used to line things up.