HOW TO EASILY SETUP YOUR SHOTGUN FOR 3-GUN | OPTIMAL MODS

[@stevekinney3166]

Mac, I'm just getting into 3 gun and your videos are by far the best for the newbies. Thanks you.

[@bullittmcqueen]

+Steve Kinney thanks steve

[@RealDonLarson]

Have not seen it if you already covered, but was interested in how you “tune your spring”. Great vid. Thanks

[@robertmack8087]

Great video , I am just thinking about starting to shoot three gun on a club level. The information here was most useful and welcome. Thank you.

[@bullittmcqueen]

Thanks for your comments! Get started shooting some matches, you'll be hooked!

[@jenna5438]

BullittMcQueen Hi Mc. I just got a JM Pro and planning to get into 3gun. What i noticed on my JM Pro is that its so hard to load shell on the chamber using the bolt handle (pulling the bolt handle to charge). Is there a way or modification i can do to make it easier? Help please. Thanks so much!

[@davidbundesen5867]

Very informative. Thank you. I’m very new. This is helpful

[@MT62770]

I'm just getting into 3-gun and purchased a JM pro. Thanks for the tips. Nice video.

[@bullittmcqueen]

+MarkT Thanks Mark!

[@KodiakCO]

OK, saw your M2 video and now this one. As a starter shotgun, I may just give the JM Pro a try. It will be A LOT cheaper than the M2. I like your videos. Very professional.

[@bullittmcqueen]

Thanks!

[@mackie1001]

Nice vid! I've just got my load 2 rig and I'm doing it strong hand like you showed at the end of this video. Working well for me so far!

[@asiftayob7628]

im looking for an base mount that reflex sight will fit directly to base mount,fit into predrilled holes on mossberg 930 reciever, so there not need for picinnaty rail system

[@klahowya_capo]

Nice work! I will be running the JM pro for three gun as well and now I have a better idea of what I need to do!

[@bullittmcqueen]

Mark Gardner Thanks Mark, good luck! Stay tuned I have a review on an interesting new product coming out that will help make your JM PRO perfectly reliable if you ever have malfunction issues.

[@avocado9763]

What was the cap you added on the extended tube. Excellent presentation.

[@bradleyperrine2874]

I have a jc higging model 20 i cant even upgrade the stock.. Or any mods

[@alpha67wolfe]

Great job Mac! JM PRO is looking great, nice to see u joined the Taccom quadload gang lol. Jesse wld b proud! Lol. Crums is my nxt stop! I'm running the Mossberg 930 Patrick Flanagan model, which comes standard with a 12 shot tube, where did you get your extended tubes spring from? Always nice to have an extra because it is a 57" spring most are 46" ...

[@bullittmcqueen]

The springs are from Nordic.

[@alpha67wolfe]

Which Briley chokes did you and up using?

[@bullittmcqueen]

Tim Wolfe I carry an IC, Mod, and Light Mod to matches.

[@klahowya_capo]

I will be looking for that! Thanks again!

[@dougtimpe1099]

Wow, he definitely has it together on his shotgun mods!

[@jonm604]

I could not understand the Mag extension tube you use, what is it?

[@dmcgreg]

Would you mind posting the specs of the mag extension (overall length)? I may see about making my own. It seems Roulette Tactical is no more, and Nordic is no longer making their XXL end caps so apart from upgrading to Nordic's MXT tubes there's no other option for a capacity upgrade.

[@sbrown6434]

Dude great video.

[@jusgoonin]

Hey bullet what's the rule regarding chokes sticking past end of barrel for 3gun I wanted a broken choke that stick out from my barrel so I know which one is in (not that I would forget) but then reading rules was concerned that would put me in a different class? Please can you clarify if you know

[@jusgoonin]

*Briley choke

[@bullittmcqueen]

Doesn't matter you can use them, a fairly large percentage of 3-gunners use extended chokes because they are much easier to change out. Doesn't change your division

[@jusgoonin]

Aight ty

[@jusgoonin]

Did you polish your lifter just got mine back from crums

[@lsmft9576]

Good job. Very informative,

[@bullittmcqueen]

Thanks

[@SnakePool]

I'm trying to get into 3-gun. I have a 930 SPX, so the barrel is 18.5 inches. there is a 28in turkey barrel available. would that length be fine, or would the 24in be more practical for 3-gun?

[@bullittmcqueen]

+SnakePool I would use the 18.5 as you get started. It will work just fine. I've never seen anybody shoot a 28" in 3-gun

[@CJRKENT7697]

what shot shell loads are you using in 3gun

[@timothymartini9969]

I just love it very informative indeed! Thanks Mac. The Philippines is being flooded with lots of 3 gun competition right now. What's your take on Turkish semi-automatic shotgun? Will it take the beating of the 3 gun requirement? Is it not a bad set up considering budget? Thanks for the advise. By the way I love your series on Gun Life.

[@bullittmcqueen]

Timothy Martini Not that familiar with the Turkish 3-gun model other than knowing that Matt Burkett at Predator Tactical is about to release a model that was built in Turkey, so it has to be fairly similar. I'll have to look into it. Thanks for watching!

[@oskinoify]

Hey Mac, the 930 turned out nice man congrats. I plan on meeting up with you in GA sometime to shoot a match together man, as I live in Greenville so not to far from you. Oh yah I also plan on getting some taccom quad shell holsters to be able to get some quicker reloading times or at least that is the goal. take care Mac!!

[@bullittmcqueen]

We'd love to have you down here man. We have a local match in Augusta on march 15th at pinetucky gun club.

[@JG-bk9pj]

Any recomendation for sights?

[@bullittmcqueen]

HiViz

[@colthatcher2698]

What reliability product are you speaking of? Do you know when you will release that video? Thanks for the great video!

[@bullittmcqueen]

Colt Hatcher Oregon 3-gun Marine Spacer Tube. I have a backlog of videos to get recorded but I hope to get it done sometime in early 2015.

[@armedrealtorakasheepdog6914]

My question is sights... I have the 22” JM Pro (I got a screaming deal on it from a guy who had only shot 1 box of shells through it and then needed the cash) and am curious about if you need to shoot slugs through it during a match. I am slowly but surely equipping myself to be able to compete. A, Is that a scenario that you have run into during competition? and B, If so, what kind of sights would you recommend? I am trying to decide and find a belt/caddies now. My hands are way too small to load quads so have been practicing duces (not from a belt obviously). Any recommendations on that as of 2018? I know equipment changes faster than you can make new videos...lol Thanks for your time, energy and efforts. I enjoy your work.

[@ΜΑΡΙΟΣΣΑΡΡΑΣ]

hello , am looking to buy a shotgun , i;ve got to models in mind first mossberg 590A1 51668 and Benelli M2 TL which one in your opinion sould i buy?

[@bullittmcqueen]

+ΜΑΡΙΟΣ ΣΑΡΡΑΣ Benelli M2, no contest.

[@ΜΑΡΙΟΣΣΑΡΡΑΣ]

+BullittMcQueen thank you very much for your time. one more thing does it withstand hardship?

[@tkdchris14]

as a beginner who competes in production/factory matches would this force me to move to unlimited? since the rules say no internal or external mods?

[@bullittmcqueen]

+Chris Bennett No, the wording regarding that is peculiar but the only reason you would have to move to open/unlimited would be if you had optical sights, magazine fed shotgun, or ports/muzzle brake on the barrel. Internal modifications and loading port mods are ok.

[@oscarsalazar361]

Great video! I own a Mossberg 930 22", that I "used" for multi gun. I now own, and use, a Versamax for multi gun. I really liked the 930 but my issue with them is that it is really hard to buy parts from Mossberg. I also would like to have the lifter welded but Mossberg will not sell any to you. That is not a good way to do business. Great gun though, too bad.

[@bullittmcqueen]

That's very true. Their unwillingness to sell parts is really frustrating. Fortunately for me, I built a 930 Turkey into a 3-gun shotgun previously, so now it serves as my backup gun and "parts gun". I felt a lot less scared to weld my lifter knowing I had a spare.

[@stag3t-muspsa910]

can u explain to me why when I quad load why does it spit a round out...I have the same gun mac....it's like a ghost load....

[@jusgoonin]

Your not pushing round in deep enough that's why people modify lift gate and port because it will chew your thumb off. If you do happen to do that it solved quickly by cocking the carrier back it will spit the round in chamber out but it will clear loading port so you can feed remaining rounds into mag

[@GrablifeCO]

Mac great vid. I just picked up the 930 JM Pro, can you provide contact info for the folks who welded the lifter for you. Thanks much.

[@bullittmcqueen]

Jeff Cockrum at c-rums.com

[@mcschneiveoutdoors3681]

why is there a shot shell taped to your gun? I have noticed that in other videos made by other people.

[@bullittmcqueen]

+Steveie McSchneive Its called a Matchsaver and 100% of 3-gunners use them

[@mcschneiveoutdoors3681]

BullittMcQueen Thanks...

[@bigrickshaberdashery2759]

nice job

[@gudio911]

@BullittMcQueen Who welding your lifter?

[@dnhman]

Good info thanks for sharing

[@bullittmcqueen]

dnhman Thanks for watching and please subscribe if you havent!

[@bnsf9161]

Bullitt - Can you tell me what shells you use in your jm pro during competition please? I am breaking mine in and I have had some malfunctions.

[@bullittmcqueen]

I have no problem with 3 drams of powder shells, and 1 oz of shot. I run 7.5 shot in competition. Some jm pros have trouble with light target loads, you may need to steer clear of those.

[@DE2137]

Understating you bought your chokes from Briley. I recently picked up a JM pro series but the 22 inch verison & they came with the wrong chokes. Only choke I have is the modified one that I'm currently using. I would like to get an extra full choke so I can keep a tight pattern at distance. How much did you buy your chokes from Briley? What's the model or product number? I've been on their website but I don't want to order the wrong ones. Thanks!!!!!

[@bullittmcqueen]

DE2137 Try this link: www.briley.com/mossbergextendedblackoxideportedshotgunchoke.aspx. The chokes will say "WinX2" on the side because they also fit the Winchester Super X2

[@jasonlove7943]

Hey Mac! Who is the manufacturer of the 2+ end cap you mentioned in this video? I am looking to add one to my 930. Thanks!!

[@bullittmcqueen]

Shooter's Source

[@jasonlove7943]

+Jason Love Thank you!!!!

[@jasonlove7943]

+Jason Love Did you use the factory spring?

[@bullittmcqueen]

No, immediately get rid of the factory Benelli spring and put in a Nordic Components spring

[@jusgoonin]

Heavy duty or regular and for some reason shooter source only has +1 end caps

[@dj42864]

I've never seen someone with a 3-gun shotgun with a pistol grip, are they not allowed?

[@bullittmcqueen]

+gringogallego Yes they are allowed. A few people use them.

[@hektoriuz]

+BullittMcQueen Grand MasterTaran Butler has used a benelli with pistolgrip stock.

[@topgunjoeicdbko]

hey ive been on your videos awhile.all i need is a shotgun for my first match on the 16th of july. i want something i can use for skeet also with a simple barrel change. do you think it would be best to just do a stoger3000 with a 28 inch barrel for now then get the shorter later plus extras to match with the m3k has. since i cant shoot skeet with a 22 but i can with that or do you think i should go with a diff idea

[@bullittmcqueen]

Get a 24 or a 26. 28 is too long for 3-gun but the vast majority of shooters shoot a 24 or 26. You can shoot skeet all day with a 24.

[@topgunjoeicdbko]

BullittMcQueen great thanks. my goal would be to switch of barrels but for now atleast i can play.

[@NeverGiveUp-ib3xb]

Awesome

[@inch308]

Nice video. Well done and professional. The music is a bit much...LOL :)

[@bullittmcqueen]

Warren Dean Thanks for watching!

[@michaelbrooks2139]

great video mac. thanks. can you give jeff cochrane's contact details. I think you said 'c rooms' but a google search didn't find him?

[@bullittmcqueen]

Jeff Cockrum www.c-rums.com

[@chris2crazzy]

Why don't jim contact mossberg with this issue ugh

[@bullittmcqueen]

[@ADifferentMindSet1982]

Been looking for new videos you busy or something 😁?

[@nigelwolfe6150]

Somewhat worthless (depending) video because trying to make it universal....just saying....go ahead and do the work and make several videos?