How to enable the G37 Tire Pressure menu: MotorvateDIY Garage Ep.51

[@raele1gh]

the best channel for g37/370z work on KZbin is back

[@MotorvateDIY]

Thanks for your kind words! I know it has been a few month since the last video, but the research, building prototypes and testing takes time. The next video (How to Replace the TPMS sensor) is already 80% edited and should be out next week. After that, I hope to have an update on the local testing of the GTR gauges :)

[@PaulsToolReview]

Worked like a charm for me on my 2010 G37S. I have been wanting tire pressure readings sonce bought the car and never understood why it was missing in the first place. Now if we could the graphics or text for left front, right front, right rear, left rear it would be 100%, but i can live with this and it beats nothing. A big thank you to all that nade this possible!

[@MotorvateDIY]

Thanks for the feedback! Fancy tire pressure graphics are built in to the nav unit, but not for the G37. I spent a few weeks trying to see if I can trick the unit to show them, but couldn't.

[@PaulsToolReview]

Is the software in the firmware or on the hard drive ? Also, any luck on getting screen mirroring working with configuration and maybe a dongle to the USB or OBD2 port. Before I was using an OBD2 Bluetooth adapter and obdlink to create a special dashboard on my phone to read the tire pressures. I can also get a ton of other info using using the dongle and obdlink, but it ties up the Bluetooth connection on your phone

[@MotorvateDIY]

From what I have seen, the firmware is used to boot up the system and provide the "fail safe" for climate control if the drive can't be accessed. I have been able to re-configure the nav unit for AUX audio and video. Then I used a MIRACAST device to display my iPhone on the car's screen. Unfortunately, the AUX in video is only standard definition (640 x 480) so the image doesn't look very good. I've used OBDLink / OBDFusion and they are great to get all kinds of data on your car. BUT sometimes the data I want is on two different "networks" and you only get data from one :(

[@longtriops]

Your work is much appreciated! Excellent presentation as well

[@MotorvateDIY]

Thanks for your kind words! Most parts of this video was shot 4 times until I got it how I wanted it. I can always think of the works, but saying it clearly is a different story!

[@krazyfiend]

You and all contributors to this effort are saints. Cheers 🍻

[@MotorvateDIY]

Thanks for your kind words. I'm not sure about the saints part... I'm more obsessive and need to figure stuff out :)

[@MrPrplhaze1]

I was wondering what you were up to lately. I'm still dream of using the GT-R gauges in my car, so I can unhook the gauges I got now. Thank you for doing this for the community! You are very much appreciated. :)

[@MotorvateDIY]

There has been a fair amount of progress on the GTR gauges. The hardware has been finalized and I now have 20 circuit boards back from manufacturing. Over the next week I'll be building a few kits and start to test locally. (Toronto) My first "other" car test is this Sunday. I can't wait!

[@yusufkadi9186]

Great work to both you and Gareth! I, and many others, thank you. This will save me and other drivers countless amounts of time, money, and stress.

[@MotorvateDIY]

Thank you!! Having live tire pressures is really nice and gives peace of mind! I figured out the TPMS menu for the G37 and Gareth figured out the easy USB method to reconfigure the nav unit. He is one of those people who know everything about everything!

[@eugenet6632]

Great video, welcome back I still have my 11 g37x, but my grown up daughter is driving it now

[@MotorvateDIY]

That's a good car for your daughter!

[@gbzoomzoom]

just did this following your steps and couldn't be easier! hopefully more customizations are available via this method. Thanks for all you do!

[@MotorvateDIY]

Thanks for the feedback and I'm glad it is working for you!

[@johnblessing00]

That simple and none of these have this on from the factory? Wow. I think there is going to be a spike in those USB cables being ordered. Thanks for this!

[@MotorvateDIY]

It is kind of weird, but Infiniti decided not to show tire pressures on the G37. I think the EX and FX do, but their TPMS system is different than what we have on the G37. As for the USB cables, I really like how a simple

[@davidbrooks1156]

Could not make this work with a USBA to USBC cable. The recommended USBA to USBA cable worked great, as did all other instructions. Thank you for this!

[@MotorvateDIY]

I'm glad you got it to work! There have been a few people that couldn't get the USB A to USB C cable to work, which is kind of weird... as it should work.

[@Venezuelan.kid1]

I just did it and it worked quite well. Thank you!! 11:55

[@MotorvateDIY]

Great! Thanks for letting me know.

[@DaveNotti]

Really and truly appreciate this channel, as I'm a recent Infiniti Owner. Clear and concise explanations. Information beautifully laid out and easy to digest. Question for you though: I've got a 2014 Q60. Is it safe to say a lot of the information found on this channel pertaining to G37's applies? Keep up the exceptional work!

[@MotorvateDIY]

Thanks for your kind words! Yes, your Q40 is basically a "2014 G37" that got caught up in the rebranding from "G" to "Q". I believe everything here applies!

[@smoochreynolds4865]

Good 2 see you back!!!!

[@MotorvateDIY]

Thanks... I've got a lot of content edited and almost ready to go. Hang in there!

[@darynm]

I was a bit nervous, but if you take your time it will work. I actually tried an old 2gb drive and like you said, it didn't work. I did find an 8GB drive and it worked! Thank you so much! Also a 2010 G37S convertible.

[@MotorvateDIY]

I'm glad you got it to work... It sure is nice to see tire pressures, isn't it? :)

[@darynm]

Oh, very much so! I wish there was a way to show which tire with basic labels, but absolutely no big deal. It's there and easy to figure out which one is which based on clock movement. Any other updates you have in store?@@MotorvateDIY

[@MotorvateDIY]

No real update.... just lots of testing and testing the GTR gauges, in my G37. (and all has been good!) I'm about to build 5-6 modules to start local testing in Toronto. I want to verify it works well on the automatic and AWD G37s. If all goes well, then late spring offer them for sale :)

[@darynm]

Gotcha! The tire pressure is all I really hoped for. Thanks again!@@MotorvateDIY

[@Ahhfiddlesticks27]

Thank you very much for another excellent tutorial. It is much appreciated!

[@MotorvateDIY]

Glad it was helpful!

[@6d00z]

2017 QX50 US Spec This method also works for my model and it's the last year that nissan uses this system. I'm guessing it'll work on EX37's as well. Thank you so much for sharing this!

[@MotorvateDIY]

I'm glad it worked for you!! The 2014-2017 QX50 uses the same navigation system (08IT) as the 2010-2013 G37, so it is good to confirm that it works on the QX50. The 2010-2013 EX also uses the same nav sysem, so in theory it should work as well. Please let me know your results.

[@JLocker]

Wow great video wish I knew about this before I sold my G37 Black Sedan for my Model 3P. The interior on the G37 far better than M3P btw. I miss her so much. 😢

[@MotorvateDIY]

Wow... that's quite a compliment for the G! For me, I'd have a hard time not having gauges behind the steering wheel... plus I'd miss that wonderful VQ sound. BUT I wouldn't miss the $125 it takes to fill the gas tank.

[@maisyray]

Why? Why! Why am I just finding out about my car 13yrs later? Plan on watching every single video you've done now. Thank you, Thank you

[@MotorvateDIY]

Thanks for subbing and watching a some videos, I appreciate it!

[@gabrielbrown2791]

I feel like I came to you for help before but not sure. My problem is my illumination lights don’t work nor does my gauges/ cluster period but it does have some warning indicator lights

[@MotorvateDIY]

Check all the fuses in the driver's footwell, on the left side.

[@AustinJonesJonesmeister11]

Just finished! Great write-up! I'm wondering what drive information would be. Just miles and time of drive? What a really cool future project would be, adding the no lift shift the 370's got. Still salty about how G37 didn't have the option.

[@MotorvateDIY]

Drive Information is just a simple trip computer. It shows the time and distance since it was last reset.... To turn it on use: sys 2 9 1 10 1 To turn it off use: sys 2 9 1 10 0 Have fun!

[@piotreknowickiyt]

Are there any other features that can be enabled?

[@MotorvateDIY]

Yes there are! The next two big items are enabling AUX IN audio/video (custom cable required) and the GTR gauges. The few remaining items aren't as interesting. All will be shown in future episodes :)

[@BigHeadClan]

Can confirm its the 2010 model that have USB, own a 2009 and was saddened to know I missed it by only a year stuck with the Compac Flash and the old-school 16-pin Iphone hookup . Sadly I've never seen an adapter that terminates to USB female for it. Great video though love the content you've been making for this platform sir.

[@MotorvateDIY]

Thanks for your verification on the usb port! After going through the documentation (shop manuals, owner's manuals, brochures and spec sheets) its good to know I got it right. Also, thanks for your kind words about the content. I'm glad you enjoy it :)

[@slydawg121]

Can confirm this worked on my 2012 370z. Mine was a bit finicky and would only read the flash drive if it was already plugged in before turning ignition on though.

[@MotorvateDIY]

Thanks for the update and the tip!

[@chrishauser5180]

This is awesome!! Well done. Thank you so much

[@MotorvateDIY]

I'm glad you like it... I love being able to check the pressures while on a long drive ! If you don't mind can you tell me what make model you did this on? Just trying to understand what works :)

[@gammaxana]

This seems like it could potentially be useful if any of us wanted to look into an alternate way of getting our nav map updated. Would need to look into more of the options of it but it would stand to reason that’s probably a feature somewhere

[@MotorvateDIY]

I thought the same thing. As it turns out the DVD map updates are encrypted and tied to the navigation ID. :(

[@Silverarrow66]

Really cool! Thank you so much for giving us what Infiniti wouldn't for some reason lol. Cant wait for the next update on the GTR Guages :) If you're able to, can you elaborate on how the coding works? If the "3" at the end of the command corresponds to the write item value, what do the other numbers mean? Do you know of or have a list of other commands that work? Would be really cool to try and enable some other options

[@MotorvateDIY]

I'm glad you liked it! Having real time tire pressures is nice. Too bad they don't use a nice graphic / pic of the car, like they do for the GTR. Since the commands are normally used for development by engineers, there is no "Are you sure?" prompt. I bricked my test bench nav unit 3 times trying out different commands. Luckily after 2+ hours I was able to get it back working, but it wasn't easy. For example, there is one command that deletes the unit's configuration, (without an "are you sure?") then you are left with no A/C control, no volume control and every time you start the car, the nav unit tries to eject a non-existent CD/DVD. Sooo, I worry that people will think there is always an "undo" when there isn't and mess up their system and blame it on me. Most of the commands are to configure existing hardware in the nav unit or on the car. For North America, we don't get many options to add/configure cool stuff. To get the TPMS menu, we tell the nav unit that we are type "X61A", which I think is the Nissan internal program name for the Pathfinder. The only other interesting options is the boot up / splash screen. You can select between Nissan, Infiniti and GTR. I will do a video in the future to show how to change this, as well as how to set the "vehicle type" so you can buy a cheap Rouge/Murano nav unit and make it work in your G37, 370Z, GTR, and and others.

[@maverick19702000]

Outstanding video! Thank you. It worked for me. I inflated my tires to 40psi but the pressure values on the Navi screen were not close. I thought I could reset the TMPS by performing the ground connector>tap 6 times>low pressure indicator flashes > but the read out on my Navi screen is asterisk now and the light won’t go off. Any suggestions?

[@maverick19702000]

I figured out my problem. I was not waiting long enough after enabling the TPMS learn mode. It is important to wait 2 minutes before starting the car and driving. My problem is that I was starting the car immediately after enabling the TPMS learn setup cycle.

[@MotorvateDIY]

I'm glad you figured it out!

[@Alekoubas]

Very very clear instructions and well made video, thank you. I managed to activate the tire pressure menu, but I'm getting ** values even after driving for a good hour. I have a 2011 370z GT, UK model. Do you have any idea why I can't get any pressure values to show? I should get a warning if the TPMS sensors are not transmitting, right?

[@MotorvateDIY]

Based on troubleshooting another UK 370Z, I learned that not all UK versions of the 370 have the TPMS system. If the wheels don't have TPMS sensors and you don't have a TPMS yellow dash light, you don't have TPMS. So... there is no data source to get the actual pressures and a *** is displayed.

[@Alekoubas]

@MotorvateDIY Thanks for the reply. This is what I was suspecting too, but couldn't confirm whether all or only some UK versions have TPMS. For what it's worth, I can faintly see the outline of the TPMS warning on my dash, but I've never actually seen it turn ON. I guess all versions share the same dash, but mine is not equipped with the system.

[@richlsz2894]

do you have part number for the usb port? mine doesn't seem to pick up anything that is plugged into it

[@MotorvateDIY]

Replacing the USB probably won't make any difference. The port just is part of a cable that plugs into the back of the radio/navigation unit. What year is your G37 and do you have navigation?

[@richlsz2894]

@@MotorvateDIY 2012 with nav

[@MotorvateDIY]

Weird... that should work. What did you plug into the USB port? If you plug in your phone, does it charge? (this should verify if the cable is plugged into the back of the nav unit)

[@richlsz2894]

@@MotorvateDIY it charges but on the screen it just says reading usb. I’ve tried brand new chargers (old gen iphone chargers & new usb-c chargers) still same message. Tried a usb stick & an android phone still same message lol. I’m thinking about getting CarPlay at this point

[@MotorvateDIY]

The USB stick must be 32 GB or less and formatted in FAT32. Anything else and it won't work. That's all I can think of. :(

[@original72canuck]

Thanks for sharing. Definitely will be handy, and will try in the near future. Would be great if you could enable a relearn mode that updates sensor positions around the car so I don’t have to borrow a relearn tool. Now that would be magical😊

[@MotorvateDIY]

Funny you should ask for that... I'm working on that...I made a cheap DIY device that can read the tire IDs and tire pressure. The next step is to program the BCM with the new IDs. Saving the TPMS IDs to the BCM is just a single command, so it shouldn't be difficult to do. Just need to wrap up the GTR gauges first :)

[@piotreknowickiyt]

There is an manual option to do it! Without any tools. You have to check manual for the right pressure for each tire. You can put your tpms module into relearn mode. Find white cable attached to cable around your legs under the steering wheel. You have to ground that wire for 5-6 times and it will enter relearn mode.

[@johnclare210]

That would be fantastic! Four winter months out of the year I have to live with a TPMS dash light because I'm too cheap to relearn my sensors twice a year, swapping winter/summer wheels. Both sets have sensors, and if there were a way for me to initiate a relearn as a DIY, I'd be all over that.

[@MotorvateDIY]

The white cable / "TIRE PRESSURE WARNING CHECK SWITCH" was removed for the 2011+ G37. If you have a G35/G37 up to 2010, you can use the paper clip method. For 2011 and up, you need a service tool :(

[@piotreknowickiyt]

@@MotorvateDIY I got 2010, and it works 👍

[@vinceventresca6719]

Wow this is huge! See some other cool stuff in there like the EQ section and background colour

[@MotorvateDIY]

Background color (either Nissan or Infiniti) , start up animation (Nissan, Infiniti or GTR) can be changed. Maybe I should make a video showing how. For a while, I did have the GTR start up animation on my Infiniti. As for the EQ section, I haven't looked into it, as I don't have an amp and speakers on my test bench. Anyways, I'm glad you liked it! I love having real time tire pressures!

[@jalalalhussary]

Awesome work. Looks pretty easy and straight forward to follow! I have a 2013 with nav and aux port but I don’t have tire pressure in the INFO menu. Is there a secret setting to make it show up?

[@MotorvateDIY]

Wait... you have a 2013 G37 with nav and have an AUX in port? I didn't think that was an option.

[@jalalalhussary]

@@MotorvateDIY yes sir! I’m that expert with the different trims and options but my 2013 G37x does have nav (map ver. 12-13 MAP No.1 and program ver. X9U62002) and aux button on the head unit to toggle between bluetooth, disc, and aux inputs and have a USB port in the center console. Do you know if the tire pressure can be enabled in INFO menu?

[@jalalalhussary]

If I’m not mistaken I think I have the premium package that come with nav and bose system.

[@MotorvateDIY]

I see now... When I refer to "AUX IN" I am talking about using RCA connectors (red, white and yellow) which stopped being available for the G37 in 2009. I think you are referring to AUX IN and using the USB port in the centre console. To get the tire pressures in the info menu, just follow the steps in the video. I have done this with a 2013 G37 navigation unit (version X9U) and it works well.

[@MrMszuman]

Hi Frank, thanks for sharing it ! Do you think there is any possibility to activate "Engine Oil temp", "ATF Oil temp", "Coolant temp" and "MAF" readings ?

[@MotorvateDIY]

Most of those items (except MAF) are part of the the GTR MFD gauges that I have been testing since March. This weekend, I'll be testing on a local G37 that has the Technology package. I can't wait to see how it turns out!

[@officialmoeee7688]

@@MotorvateDIYi look forward to hearing how this goes!!

[@MotorvateDIY]

Me too! I think it should... but sometimes you get thinking about the "what ifs" and you get doubts. I'll know soon!

[@butertoast4]

get a tune and ecutek tell you all that

[@TheJoeyFerraro]

Legendary as always! Thanks for all of your hard work. Have you got any other commands here figured out? I've been wanting to change my startup animation but don't have a lot of the pieces you all seemed to use to connect to the systems before. It would be nice to be able to modify the radio values through CLI like you do here.

[@MotorvateDIY]

There are just over 200+ commands. BUT most of them are for trouble shooting and debugging. New features come from specifing a different configuration. Like the tire pressure menu. In a future episode I will show how to change the start up animation to one of: Infiniti, Nissan or GTR. A believe custom animation is possible, but VERY difficult to do and above my ability. What do you mean by "modify radio values"?

[@GoogleSystemAdmin]

Hey man, I've got a 2012 Infiniti G37 just like most people only the year is 2012..... Anyways to the point I have went out and bought four different adapters with no luck to try to get my Android phone to stream audio to the car. iPhone works fine. Even iPad, just plug in and it'll start playing my KZbin music streaming service. For the life of me, I cannot get any Android device to plug in and play music. Any advice is greatly appreciated. Cheers mate!

[@MotorvateDIY]

I'm not sure I can be much help. 99% of the time I use my iPhone to stream audio in my G37 and it always works well. On my test bench, I just paired an old Galaxy Tab A running Android 8.1.0 and it played youtube audio just fine. The only thing I can think of, is to delete all bluetooth connections on the car's unit and try again. Good luck!

[@GoogleSystemAdmin]

@@MotorvateDIY Oh crap! It probably doesn't help that I'm using Google's latest phone the pixel 8 Pro 😅. I tried getting one of those USB to Android Auto dongles but since it doesn't have Android auto, it just loops on my phone. I tried getting one of those dual receiver Bluetooth USB sticks with no luck, so I ended up just getting a second SIM card and an old iPhone. I don't have any new ones, but that iPhone is currently the music center of the car. A bit inconvenient but hey you know music so I appreciate everything, let me know if anything comes to mind. Cheers mate

[@MotorvateDIY]

I'm starting to think the new phones are dropping support of the very old 1.2 and 2.0 Bluetooth versions, as that is what the G37 uses. However, it seems like you have a good work around!

[@GoogleSystemAdmin]

I think you're exactly correct, the phone I'm using is Google's latest pixel 8 Pro, so it makes the most sense that it's no longer compatible with older protocols. ​@@MotorvateDIY

[@dBassHz]

Not very knowledgeable about CAN Bus and ECU programming, but would this module interfere with EcuTek tunes? Also, would the module be able to control boost with the associated hardware? Thanks for all you do!

[@MotorvateDIY]

This won't interfere with EcuTek. The navigation system configuration change doesn't change anything externally, so there is no way I can see it causing any EcuTek issues. I will verify this in the next few weeks, when I start the tuning process. I've never thought about a boost control add-on and will look into it once the GTR gauges are done testing. Thanks for the suggestion.

[@AN0NYMOUS1_69]

Awesome work!! 👏

[@MotorvateDIY]

Thanks! Even though it is an ugly list, it is better than nothing!

[@ItsAidan]

I’m confused, why aren’t these options available on the non navigation unit, it’s the same hardware??

[@MotorvateDIY]

My only guess is the marketing team decided not to have this available. BUT it sure is nice to check tire pressures when on a drive!

[@mikeucfl]

Any confidence that 370z's interface acts the same, and takes the same commands? Very cool, thanks for the video!

[@MotorvateDIY]

I think it should work. I didn't mention it, as I haven't been able to test it on a 370. I actually followed a 370z into a store parking lot and asked if the driver if car had navigation... It didn't :( We than chatted about the G/Z for the next hour! Super nice guy. Anyways, the navigation system in the G37 and 370z (and many other Nissan/Infiniti vehicles) are the same units, known as the "08IT". Just the configuration file is different, for the different models and options. If you can provide a 370 "xrcnf 2" config file here, I''ll test it on my on the bench and then my car.

[@mikeucfl]

@@MotorvateDIYsure thing. I am waiting on a cable to arrive today and I’ll grab the output. Would it be easier to send you the file through myg37/the370z forums?

[@MotorvateDIY]

If you could post (or PM) on the370, that would be perfect. I didn't mention anything on the my370 forum, as I have no proof that it works and wanted to get feedback on the G37 first. BUT, since you are going to try this, I look forward to you observations!

[@mikeucfl]

@@MotorvateDIY sent you a message on the370z forums with a pastebin link, output looks similar to what you had.

[@MotorvateDIY]

Sweet! I'm heading there right now. Did it work as expected?

[@MichaelKorshikov]

Great video, as always, you never disappoint! Would you happen to know if this would work on 2014 Q60s w/ Nav? Also, is there a way to enable Tire Pressure menu on non-nav G37 (specifically, talking 2013 G37 journey)?

[@MotorvateDIY]

The 14-15 Q60 does use the same nav system (08-IT), however, I don't know anyone who has tried it, but I do think it will work. As for the non-nav G37 tire pressure menu, I haven't looked into it, so I don't know.

[@tomykas0]

EX35 2011 worked like a charm. thanks! although when connected with Putty, there were continues errors, just ignore them and put down the commands.

[@MotorvateDIY]

I suspected it would work with the EX, as it uses the same navigation system and now I know. Thanks! In the xrcnf command, what was the vehicle type for your EX?

[@tomykas0]

So I connected again and enabled logging. Vehicle type is "0x5342 (P53B)"

[@MotorvateDIY]

Thank you!! I'll add that to my notes.

[@fredb3696]

hello i am french and i would like to put a kn filter on my civic 1.8 ivtec but i have a lot of questions about the quality of filtration do you think it filters correctly thanks

[@MotorvateDIY]

I think it filters OK for the conditions I drive in. In my area, it isn't very dusty, and does a good job. If I lived in a very dusty area, I would stay with the factory filter.

[@isaacg35]

I get a pop up saying unplayable file. Doesn’t show up in device manager either. 12 g37x with Bose and nav.

[@MotorvateDIY]

Most common solution: Make sure Windows has "show extensions" turned on, and verify the filename. You can also look through this thread for other problem/solutions: www.myg37.com/forums/brakes-suspension-wheels-and-tires/303424-how-to-enable-the-g37-tire-pressure-menu.html Good luck!

[@coreymorgan7310]

Hey Frank, hope you're doing well and Happy Holidays. I was wondering if I could try a laptop with Windows 8, idk if you could even answer this question but I figured I'd ask. Thank you

[@MotorvateDIY]

Hmm...I'm not sure... try it and see if a COM port shows up. When I tested this in Windows 7, a USB driver was needed and I had no idea where to get a USB driver for a navigation unit!

[@MerlinAlinaya]

I have 2012 g37 coupe one of my tpms is reading bad. do I need to replace all 4 then reprogram with this system? Tpms lights is always on. This video is a lot of help.

[@MotorvateDIY]

It depends on how much you want to spend... You can just replace the one that isn't working and get the BCM programmed.... or replace all 4, get the BCM programmed and you should be trouble free for a few years. For me, I hate to replace parts that are still working, so I would only replace the one TPMS sensor that has died. Also, if you have navigation, and follow the steps in the video, you will be able to tell which TPMS sensor is bad, as it will show up as "***" for the pressure.

[@thaisayz]

I have a g35 2007 sedan MT , having problem starting the car with push button. Whenever i press the start button it only click once. New starter, new ignition switch, new battery, new fuse, new relays. Only way I could start the car is to jump wire the solenoid in the ipdm Box. Any clue?! Thanks in advance.

[@MotorvateDIY]

The only things that comes to mind is the IPDM/ER. It contains the starter relay and the starter control relay. The starter control relay is the one you probably already replaced as it is easily removable. However, the "starter relay" is inside the IPDM/ER and is not removable as it is soldered to the circuit board. If you need a wiring diagram, pop over to nico club dot com and you can download it for free. Good luck!

[@flipmode00]

I will never understand why the 09 never came with a usb port?

[@MotorvateDIY]

Like you... I also don't have any idea...

[@bradleysmith6822]

Confirmed working on UK 370z. I have 4 options for tyre pressure: psi /kpa/bar/kg cm3 ?? Works great, thank you!

[@MotorvateDIY]

Fantastic... Thanks for your feedback / confirmation that it works not just on a 370, but on the Europe version of the nav unit software.

[@Wildzephr]

Any idea on how to upgrade the factory Bluetooth module?

[@MotorvateDIY]

Some have been able to re-purpose the satellite radio audio input for bluetooth, but I don't know anything about that.

[@Evolution2810]

So my 370z doesnt have tpms sensors in the wheels, does this mean i could buy some and link them up? Is there a certain process to linking them? Or would it not work

[@MotorvateDIY]

I'm not very familiar with the 370, but I do think if you added sensors and had a shop program them to the car, it should work.

[@CDogL8RGamer]

Is there a way to do this with the engine oil pressure ?

[@MotorvateDIY]

No. The G37 (and 370) don't have an oil pressure sensor, just a switch. However, if your G37 / 370 has navigation, our GTR MFD gauges can show oil pressure when a oil pressure sensor is added. kzbin.info/www/bejne/Z5uog5xna9tlo9Efeature=shared

[@omorin34]

I have a very well cared for 08 without a usb. very interested in this and the GTR updates also just wanted a USB plug. wanted to know if I could swap out the radio for a later unit. Has anyone done this?

[@MotorvateDIY]

From the data I have, the 08-09 G35/G37 with a 2010+ navigation system probably won't work or have a lot of gauges that don't have any data. The data source for the gauges is from the vehicle's network (CAN bus) and a lot of data items just are not on the 08/09 vehicle's network.

[@omorin34]

@@MotorvateDIY Thanks that actually makes a lot of sense. I also have a Ram 2500 Cummins diesel, Tradesman. I added many wire looms to the CAN Bus for remote start, folding mirrors, auto fog lights, etc. Then re-program the system to turn on the options I added. That was updating within the same year. If it didn't exist, in 08, I'm out of luck and will not be able to update. Not interested in pulling the car apart either to update everything, later year bus and wiring harness. Thanks.

[@JoseluisGonzalezdelgado-d8b]

I have an infiniti g37 sport year 2012, you can apply this update for Mexico

[@MotorvateDIY]

I think it should work for you in Mexico, since it has worked for 370z in Europe. The software seems to be mostly the same in the different regions. Unfortunately, I don't have a way of testing it on anything other than the North American version of the NAV system.

[@jdjack68]

I got an "unplayable file" when I plugged in the USB with the text file

[@MotorvateDIY]

Most common solution: Make sure Windows has "show extensions" turned on, and verify the filename. You can also look through this thread for other problem/solutions: www.myg37.com/forums/brakes-suspension-wheels-and-tires/303424-how-to-enable-the-g37-tire-pressure-menu.html Good luck!

[@17al3x17]

Cool news again ! 👍 Just a question, I have a Mac, did you know what software to use ? Thanks for your work ! I'm waiting the others features 😅

[@MotorvateDIY]

I'm glad you asked! Everything I do, is done on a Mac first. For the most reliable results, use the sdcard.org formatter (they have a Mac version) on your 4 - 32 GB memory stick. Make sure FAT32 is selected. Then, instead of putty, you can use free app "SerialTools" from the App store. Make sure baud rate is 9600, 8 bits, parity none and 1 stop bit. RTS and DTR must be selected. Then select the port (can guess one at a time) and click on "Connect"

[@17al3x17]

@@MotorvateDIY yeah! Thanks for your answer 👍 I will try on my 370z europe version ( 2017 nismo ) when I have the cable 🙂

[@MotorvateDIY]

Just make sure you have the TPMS option. I was working with a person from the UK that couldn't get the TPMS menu to display pressures... after many back and forth conversations, he found out the car didn't have TPMS.

[@17al3x17]

You know how can I check it ? I didn't know if I have it ( Normally yes )

[@MotorvateDIY]

I think TPMS was required by EU law starting in 2014, so you should have it.

[@natec811]

hey sir, ive been trying to get in touch with you to work with you on a canbus project i have. getting the 370z motor to communicate with my 03 350z.

[@MotorvateDIY]

Feel free to send me a DM on Instagram: motorvatediy

[@excellentpranks3287]

I have windows 11, and under the device manager there isn’t ports listed anywhere

[@MotorvateDIY]

What year and what make/model? That means the nav unit is not in debug mode. The most common cause is the windows default setting of "hide file extensions" The filename looks like "UsbDebugStart.ivanaX", but is really "UsbDebugStart.ivanaX.txt" In windows explorer, click on View > Show > File Name extensions If you see the .txt, delete it, that was the problem. Shut down the car for 10-20 seconds and try again. The other thing you can try is to use the sdcard.org "SD formatter" to format the memory stick. Sometimes a windows formatted memory stick doesn't work BUT this one seems to always work! Let me know how you make out!

[@piotreknowickiyt]

same problem here

[@timkelley6383]

I have 2012 G37X with navigation and using usb-A to usb-c does not work. My usb A to A cable will be here tomorrow and I'll retest.

[@MotorvateDIY]

I never thought about using a USB A to USB C cable... That's a great idea, as many people already have that cable. I just tested it on my Mac and it works just the same as the A to A cable. In windows, the default setting is to hide the file extension. This results in a file that shows as "UsbDebugStart.ivanaX" BUT is really "UsbDebugStart.ivanaX.txt" To fix this: From Windows Explorer, select the "View" control in the toolbar ribbon, then "Options". From the Folder Options dialog window, navigate to the "View" tabpage. Uncheck the checkbox labeled "Hide extensions for known file types". Good luck!

[@timkelley6383]

Tried 3 different type C cables and no connection. Used new USB A cable ordered from your Amazon link and worked great. Computer is HP 360x

[@MotorvateDIY]

I don't know why the USB C cables didn't work.... BUT I'm glad the A to A cables did!

[@AngelJuarez-ip8bl]

Hello motorvate! I recently did a vhr3.7 swap into my g35 coupe 06. Engine starts, car idles and runs. however my cluster aren’t working with this swap. Anyway you can shine some light on what could I possibly do for this to work ?

[@MotorvateDIY]

Yes I can :) The gauge cluster receives engine RPM, coolant temp, speedometer, and a few other via the car's network (known as the CAN bus) For the 2007+ G35/G37 (V36 platform) Nissan/Infiniti changed the CAN bus message format. Soooo, your 06 G35 cluster is not receiving the messages from the VHRs ECU, and ABS module, so the gauges don't work.

[@AngelJuarez-ip8bl]

yes, my speedo and gas gauge work. however my tach and temp does not. i'm running aftermarket glowshift gauges to hopefully get me by meanwhile. I need to locate the tach signal wire so i can hook up my after market tach gauge. do you have any idea where i can tap into that wire or receive the rpm reading from a coil possibly ? @@MotorvateDIY

[@MotorvateDIY]

The VHR ECU uses a different CAN bus message than the 06 G35 to send the engine RPM and coolant temp to the gauge cluster. That's why they don't work. If you are interested, I am 99% certain I can put together a module that will convert the VHR CAN bus data to the 06 G35 cluster, giving you RPM and coolant temp, just by plugging it into the OBD port or wire in a module. The other option is to use ECU pin 110 (Engine speed output signal) to drive the aftermarket tach and don't worry about having coolant temp.

[@AngelJuarez-ip8bl]

how much ?@@MotorvateDIY

[@MotorvateDIY]

Sorry for the delay in getting back to you. It will take some time for me to build and test this... I will need to dig out and wire up my 03 G35 cluster (should be the same as the 06 from a CAN data perspective) , write the program to convert the CAN data and then test it. The GTR gauges are my top priority right now, but #2 is now the "VHR to DE" converter. I'm aware of a few people who have also done this swap and it may help them. As for the cost it will depend on the hardware needed and I won't know that until I test. My goal is $100 or less.

[@piotreknowickiyt]

Can't identify com ports on windows 11, device manager doesn't show com ports assgined to usb

[@MotorvateDIY]

That would indicate the navigation unit isn't in "USB debug mode" or maybe a power only or bad USB cable. Use the official SDcard.org (official governing body of SD card standards) formatting program (www.sdcard.org/downloads/formatter/) to format the 4 - 32 GB USB memory stick Make sure Windows isn’t hiding the filename extension:
-From Windows Explorer, select the "View" control in the toolbar ribbon, then "Options". -From the Folder Options dialog window, navigate to the "View" tab. -Uncheck the checkbox labeled "Hide extensions for known file types". Now create the “UsbDebugStart.ivanaX” file and try again.

[@piotreknowickiyt]

It's working on G37 2010 sedan v36. I see there a lot of different options after typing "sys"

[@taliversetv]

Thank you sir! Got torsos another sub

[@MotorvateDIY]

Excellent! Thank you!

[@zhaoming1771]

我的QX50尝试成功了😁 谢谢你！

[@MotorvateDIY]

Thanks for letting me know it works on a QX50!

[@AB-wi2mh]

Does the usb flash stick has to be 4gb or any size will work?

[@MotorvateDIY]

The memory stick must be 32 GB or smaller and formatted in FAT32. For best results, use the official SDcard.org (official governing body of SD card standards) formatting program (www.sdcard.org/downloads/formatter/) Sometimes, a Windows format doesn't always work, but the above formatter does :)

[@coreymorgan7310]

Hey Frank hope you're well, I'm kinda a computer idiot. How can I be sure I'm getting a fat32 compatible 8gb USB stick?

[@MotorvateDIY]

The easiest way is to use the "SD Card Formatter" www.sdcard.org/downloads/formatter/ Good luck!

[@hayanalkharusi7970]

i couldn’t find the "ports (com & lpt)" tab on windows 11

[@MotorvateDIY]

As you can guess, it is difficult to to troubleshoot this over the internet. I'm going to assume you Windows 11 PC, is not "locked down" and you can add devices. If there is no COM port, means the nav unit is not in debug mode. The most common cause is the windows default setting of "hide file extensions" The filename looks like "UsbDebugStart.ivanaX", but is really "UsbDebugStart.ivanaX.txt" In windows explorer, click on View > Show > File Name extensions If you see the .txt, delete it, that was the problem. Shut down the car for 10-20 seconds and try again. The other thing you can try is to use the sdcard.org "SD formatter" to format the memory stick. Sometimes a windows formatted memory stick doesn't work BUT this one seems to always work!

[@hayanalkharusi7970]

@@MotorvateDIY I’ll try again with a different memory stick thank you

[@hayanalkharusi7970]

@@MotorvateDIY I tried it with the usb A to C cable but it didn’t show up. Then I put an adapter usb C female to usb A male and it worked it showed up the port menu. Thanks alot for the help

[@MotorvateDIY]

Well... that's odd! BUT I'm glad you got it figured out!

[@MarcosGarcia-xg1rf]

Will this work while plugged into a dongle on a Mac air

[@MotorvateDIY]

Yes! Before I did this using windows, I did this on my 2015 MacBook Pro. Just use a free serial program called "SerialTools" from the app store. Good luck!

[@AB-wi2mh]

When I plug usb in car it says unplayable file?? Please help

[@MotorvateDIY]

Troubleshooting Tips: Memory stick must be 32 GB or smaller Use the official SDcard.org (official governing body of SD card standards) formatting program (www.sdcard.org/downloads/formatter/) -AND- Make sure “Hide extensions for known file types” is not selected: From Windows Explorer, select the "View" control in the toolbar ribbon, then "Options". From the Folder Options dialog window, navigate to the "View" tab page. Uncheck the checkbox labeled "Hide extensions for known file types". make sure file name is UsbDebugStart.ivanaX

[@AB-wi2mh]

Perfect the usb worked. Thank you. What should I do once I plug in usb to car and laptop but doest show which com ..do I need to do anything for it to work. Thank you!!

[@MotorvateDIY]

No, it should show up in Windows 10 in device manager.

[@JRQUION]

What does "maintenance info" show?

[@MotorvateDIY]

It shows this: www.myg37.com/forums/g37-sedan/256041-2013-g37s-service-engine-soon.html

[@JRQUION]

@@MotorvateDIY thank you, could you tell me what DRIVE INFO shows?

[@MotorvateDIY]

Just a simple old school style "Trip Computer" that show distance travelled since last trip reset and duration of current drive.

[@luisulloa80]

Can this be done on a 2009 G 37

[@MotorvateDIY]

Unfortunately no. The 09 uses the previous generation navigation unit and the CAN bus data needed to drive the gauges is not on the cars network.

[@JamieO-lz9mk]

Hello i have been searching how to contact you. I woukd love to buy one of these.

[@MotorvateDIY]

There is nothing to buy from me. Just pick up an "USB A to A" cable and follow the directions in the video. (assuming your G37 or 370 has a TPMS system)

[@Bill-ze8bn]

Was your laptop Windows 64 or 32 bit?

[@MotorvateDIY]

That was 64 bit windows running in a virtual machine on my MacBook Pro. i would think it would also work on 32 bit Windows, but I don't have the hardware to test.

[@8timex]

bro you need to make more about the gtr radio for the g37 i wanna buy one

[@MotorvateDIY]

Don't worry... It is still being worked on :) The production circuit boards have arrived! Over the next few days I will be assembling a few and will be testing locally.

[@hayleencruz8865]

I have 2014 q60 do you think it will work

[@MotorvateDIY]

If your menus look like the menus in the video, I think it should as you have the same nav unit as my G37. Good luck!

[@SkarRowdoggs]

Im finna try this on my 2013 G37. I'll come back with an update.

[@MotorvateDIY]

I look forward to that :)

[@AB-wi2mh]

Can someone please tell me if a 128gb usb stick will work??

[@MotorvateDIY]

No, max size is 32GB as the file system must be FAT32 for this to work.

[@jojochannels]

Thanks but you missed to give the most important info, what are the 4 sensors I have to buy and put on each wheel ?

[@MotorvateDIY]

You need the TPMS sensors that work with the factory system.

[@jojochannels]

@@MotorvateDIY Link ?

[@MotorvateDIY]

I'm unable to give a direct link as I don't know the year of your G37 or what country you are in. Some G37s in Europe don't have a TPMS system. Try Rock Auto, Amazon or google G37 TPMS sensors.

[@MichaelMantion]

anything for a lexus gx460 lol

[@MotorvateDIY]

Sorry, but I don't have anything for a Lexus, just Nissan/Infiniti vehicles.

[@michaelcalderon4401]

Too bad the 2008 didn't have a usb port 😢

[@MotorvateDIY]

Agreed! The first year this works is 2010, as that is when Nissan/Infiniti switched to the "08IT" navigation system. The previous nav system is the "06IT" and doesn't support this reconfiguration. (as far as I know)

[@unslicedbreadd]

no way to get this to work on non nav?

[@MotorvateDIY]

There might be a way... Someone without nav is going to try this and see what happens. If it works, I'll let everyone know :)

[@unslicedbreadd]

this would definitely be nice to have on non nav instead of having to use a scan tool to see my pressure lol! I know you can switch non nav to nav but thats more expensive@@MotorvateDIY

[@solocamo3654]

"must have nav" ... aight Imma head out

[@MotorvateDIY]

Hold on, I may have good news... I've been in contact with a G37 non-nav owner, and he is going to see if the steps in the video work. Just maybe, it may work for all G37s. If it works, I'll let everyone know!

[@solocamo3654]

@@MotorvateDIY No worries, was just giving you a hard time, but I appreciate any updates as it would be awesome to have. Thanks for all the videos as always.

[@G37xMaN]

Did it work? No nav here as well.

[@supradoom]

Playing Doom! lol. cant wait.

[@MotorvateDIY]

AND it sounds really good through the Bose system!

[@supradoom]

@@MotorvateDIY huge doom fan so i look forward to it.