How to enable traffic sign reconize on ipc using forscan

[@christz1054]

Great videos, managed to get TSR working but i dont have the display option under TSR to move it to the left side of the IPC and overspeed chime. What firmware version do you have loaded

[@joost1453]

This dashboard looks so much better than the 2 display versions

[@Deerslayer369]

Any idea how to enable street sign recognition in a 2022 Ford Explorer XLT? I can't believe it doesn't have it already. It's fully loaded, including a moonroof.

[@Ptrip42]

Hey man, I got new tires and my lane assist and auto high beams got disabled after? How do I get them to function again?

[@XpolrerST]

I'm going to try it. I have the MKZ cluster and front camera on my fusion

[@fmkimports4044]

Hello do you know which is for Ranger Limited 2017? Can you tell me where I get this information from?

[@CakeOfPlay]

Hello, as far as I've seen in your videos, you have installed a mirror with camera from 19 fusion. So my question is, do you need to flash the IPMA (camera's) with a Mondeo IPMA firmware (or any any other). Or you just turned on the corresponding options in configuration (IPMA, IPC) and that's all, to make traffic sign recognition system work?

[@Nickthecarguy]

All I had to do was enable it in the asbuilt data no firmware flash needed

[@CakeOfPlay]

@@Nickthecarguy I also have seen a video of signs displayed on your instrument cluster. Nonetheless, they were shown as European style signs. So it recognises US style speed signs (rectangular), but shows them as if the EU ones (circular), or you do have circular speed signs, so there are shown as they are?

[@CakeOfPlay]

@@Nickthecarguy what I’m wondering about, is if the US fusion camera will recognise the EU speed signs))

[@Nickthecarguy]

@@CakeOfPlay I would think it would. Only problem I had was my fusion speedometer doesn't work for traffic sign I had to replace my speedometer with a mkz or a mondeo speedometer

[@TNB23]

Hmmm 🤔 this is very interesting.. I maybe do a dash swap just to get this feature for my 2014 Fusion and 2015 Edge

[@Nickthecarguy]

This speedometer came off a 2018 lincoln mkz I had to switch out the facemask because the Lincoln mounts different than the fusion. Also had to reflash the firmware so it will be a fusion firmware instead of lincoln

[@ryanrs1000]

Hey nick, I have a 2015 Lincoln MKZ with the same instrument cluster. I’m looking to update the firmware in the IPC to get the thicker blue needles and the digital speedometer. Do I need to record my mileage when I update the firmware or will the cluster keep that saved? Thanks

[@Nickthecarguy]

The cluster will save the milage

[@ryanrs1000]

@@Nickthecarguy Thank you sir, would you happen to know which firmware would be the correct one or where to find it? Definitely don’t want to brick my IPC, but I’m also itching to go in and change things now that you don’t need a UCDS subscription to do it. I have forscan and an OBD link ex if that helps.

[@0stall]

Hello, in an older video of yours I asked you how to add a language to a 2013 Ford Taurus if you remember. I've found a way which is I can add a digital speedometer with the specified language that I want by installing/flashing a firmware to my existing IPC. I know the Solution but I don't know how to do it unfortunately. Can you help me how you managed to flash the firmware to the MKZ instrument cluster? and where can i find the firmwares ? Thnaks.

[@Nickthecarguy]

Unfortunately I didnt flash the firmware on mine a friend of mine flashed my firmware

[@TheCarCrazyGuy]

Will it work with the 2 LCD cluster with a 2019 Fusion with standard drivers assistance package?

[@Nickthecarguy]

That's a good question I dont know I've tried to enable it in the easy mode and didnt notice anything. Maybe if you do it in the asbuilt format it might work

[@joshw4328]

@@Nickthecarguy can confirm with stock gauges with driver 360 package this does nothing for 2019

[@Nickthecarguy]

@@joshw4328 yes I tried it out with a fusion speedometer and it doesn't show it. Apparently the fusion don't have the firmware to display the traffic sign

[@joshw4328]

@@Nickthecarguy on the lines of another subject for the fusion I got a 19 I just bought can you dm me I have a few questions for you about ambient lighting adding everything and mods

[@Nickthecarguy]

You have Facebook you can message me on Facebook nick the car guy

[@sandersalazar9114]

Hello nick, is ordinary dash cam? And if how to rewired it, thanks

[@Nickthecarguy]

This is a black vue 900s 2ch it got a front camera and rear camera. It is pluged into my 12v outlet under the radio I dont have it hard wired

[@boricuaboi212]

Do you know if i can get this to work on a 2021 ford explorer xlt that does not have navigation? I found the settings and enabled it but it loads to 48% and then becomes disabled again

[@Nickthecarguy]

Probably they changed the firmware on the 21 or it don't have the firmware to enable it on the speedometer. My fusion ipc original wouldn't allow me to enable it either. This speedometer came off a Lincoln mkz

[@Johaidiiii]

Hi! How about europe Mondeo mk5? It's possible?

[@KingManga360]

I hope I can do the same thing on my 2016 Ford Fusion

[@TheCarCrazyGuy]

How do you program the mirror camera?

[@Nickthecarguy]

On forscan there is a lane departure calibration procedure you can do.

[@aaad3516]

Ford Focus 2017, tou haver?! Portugal

[@jquiznos2283]

what camera is that?

[@Nickthecarguy]

Whar camera on the car? The rear view mirror?

[@jquiznos2283]

@@Nickthecarguy whatever youre using to detect the light. Isn't it a camera? Maybe I misunderstood.

[@adrianoferrazviana3702]

work for Ford Fusion 2016 hybrid?

[@Nickthecarguy]

Unfortunately no

[@adrianoferrazviana3702]

Excuse me for the question, would you be able to do perpendicular parking, active brake, or something else if the configuration is original?

[@Nickthecarguy]

@@adrianoferrazviana3702 the perpendicular park you will need the front sensor full and rear sensor full for it to work

[@adrianoferrazviana3702]

yes, and the code procedure would be able to pass inform?

[@biangk9538]

Do you have to change GWM ?

[@Nickthecarguy]

On mine I didnt have to

[@Nickthecarguy]

Mine is a 17 fusion and the speedometer came off a 18 mkz

[@biangk9538]

@@Nickthecarguy I changed it in ipc but it only shows on taplo but I can't read the traffic signs

[@Nickthecarguy]

Do you have lane departure system

[@biangk9538]

@@Nickthecarguy have a lane keeping system, do you have to activate anything else? BCM...

[@abraarukuk]

ipc not showing in forscan

[@XpolrerST]

My Line on 720-03-02 reads 880C 28E8