How To Add Digital Speedometer & Tire Pressure to Left Instrument Display-2015 Ford Fusion SE

ForScan- Adding Digital Speedometer & Tire Pressure to Left Instrument Display-2015 Ford Fusion SE , yes I did notice all the DTC those will be taken care of, if you got questions leave a comment. #forscan

[@coolissimo69]

First and only video that explains how to do this , thanks mate so appreciated.

[@neoknight14215]

It's good to know that you can add those features to the oem cluster without buying and programming the mkz cluster even though the mkz cluster is all digital and looks better.

[@neoknight14215]

Ya im finally at the point where im gonna buy a laptop and forscan and add the digital speedometer, psi guage and ill add the mustang style fog and headlights and have the fog light turn signals with the mustang style sequential turn signals. Ive been watching this content for what seems like forever and ive done the fusion floods and all of that jazz. Its gonna be alil more enjoyable to go to meets at night and the other local fusion guys are gonna look at my fusion and say wtf 😆 i tried to put them down but they dont listen.

[@manuelcruseturner9138]

Awesome hopefully one day I can do it to 2015 limited Taurus

[@solomonsmith4995]

I’m doing it this weekend 2013 limited loaded I just did the navigation install

[@TMLay]

Will this work on the 2014 ford fusion titanium? Tire pressure display is the only feature missing.. And if so what exactly do I need to order off Amazon?

[@lisek4363]

2016 SE and it works thanks

[@BlueThunder05]

Did not work on my 2016 Titanium Energi

[@luismiguelsantos8481]

Tengo el mismo y no funcionó

[@mr.boniato6402]

Does it have the option to change the ambient lighting color..also the blue led inside the dashboard?

[@EverythingWindsor-EssexCounty]

Are you talking about the ambient lighting in the cup holders and doors? If so I think there is an option on the screen for that or a button, as for the dash , this was the exact reason I got into forscan was to change that color and it didn’t work

[@fccquoter19]

2013 Ford Escape Titanium, digital speedometer isnt available.... Dang!!

[@9kr512]

I enabled it (center screen version) lowest 2016 trim (S) tpms worked fine but no where to find digital speedometer on the cluster

[@EverythingWindsor-EssexCounty]

I’m not familiar with the centre screen version

[@9kr512]

@@EverythingWindsor-EssexCounty all good man thanks for the informative vid brotha!

[@TimM519]

That is frickin sweet man I need to get me one these scan tools I got the snap on obd but it don’t do all this jazz

[@EverythingWindsor-EssexCounty]

Ya a bit of a game changer

[@TimM519]

Hell ya probally a TON of shit ya can with it

[@EverythingWindsor-EssexCounty]

Yeah specially if you have a F150 Bambi mode is a must, it allows high beams with fog lights

[@TimM519]

ya no i wish i had an f150 i drive a cadillac sts BUT im SURE there is shit i can do to it!?!? \@@EverythingWindsor-EssexCounty

[@EverythingWindsor-EssexCounty]

On this car it was already enabled , when I select oil life reset it shows the percentage.

[@DoeRainn]

Can I enable remote start with forscan on my 2014 Ford Fusion SE?

[@EverythingWindsor-EssexCounty]

I don’t think you can

[@ALXMARTIN]

I have the basic Gauge cluster without a color LCD, and I want to install the dual screen cluster, is there alot of programming involved in this?

[@EverythingWindsor-EssexCounty]

That I’m not sure of , your best bet is to join the forums and ask there

[@BloodyEnviouZ]

Will this work for a 2013 Ford Fusion Hybrid SE

[@EverythingWindsor-EssexCounty]

It should work if the sensors are installed in your model, give it a try and if it doesn’t work you can always revert the settings back to the way they were before just keep notes on what you are changing.

[@warrenmitchellg1]

Late to the party. I have a 2013 Titanium. If my tire pressure is low. It’ll tell me but doesn’t specify which tire. I hate it. I tried this and it didn’t work. Really disappointed

[@Stephamore07]

Thank you!

[@Hasan.T]

Hello, thanks for the video. All I want is a digital speedometer. I've got a Ford Mondeo/Fusion 2015 with Sync 2. Will this work on it?

[@EverythingWindsor-EssexCounty]

I can’t say it will for sure but it worth a try

[@aaronmontoya4895]

My forscan looks a bit different, I’m using the 2 month free one and using the OBDlink connector, not sure if that has to do with it, would you happen to know the fix?

[@EverythingWindsor-EssexCounty]

I would suggest getting the full free version and the wired obd with the physical switch.

[@biscuits3472]

I have a 2015 Taurus and followed your steps but that option doesn’t come up. Can you help?

[@EverythingWindsor-EssexCounty]

There might not be that option on your car

[@jcruzs21]

Hello, did you install lincoln mkz 2013 cluster in my 2013 fusion, the tpms option does appear in forscan but it does not enable it on the screen and the digital speedometer option does not appear. Will you have update files or what can I do? I have a 2-month license for forscan and elm 327 and obdlink ex help please

[@EverythingWindsor-EssexCounty]

I’m not sure if this will work in a 13 - I been told it only works for 15 and up

[@mhmddweik9495]

i did these steps exactly in fusion2015 but not work and the dashboard maybe different than your dashboard any help ?

[@EverythingWindsor-EssexCounty]

Your dashboard isn’t the same layout?

[@mhmddweik9495]

Yes I have not display mode

[@grek999]

Well done! I just wonder, why I don't see IPC module when scanning with Forscan in my Lincoln MKZ '13? Is it because of adapter model/version? I am using wired Ford ELM327 adapter.

[@EverythingWindsor-EssexCounty]

Let me get back to you on that.

[@yazmo-official6417]

Any updates? I’m trying to do this on my 2014 mkz

[@EverythingWindsor-EssexCounty]

@@yazmo-official6417 are you using forscan with standard license with 2 month extended trail. If you need further help please email the address in the about section of this channel picture of your screen where it shows no IPC

[@Tralloz]

When i try to do it in my 2017 mustang always says that the configuration failed

[@EverythingWindsor-EssexCounty]

Same dash ?

[@jayanderson2274]

Do you believe I could enable these features in my 2015 Ford Taurus SEL?

[@EverythingWindsor-EssexCounty]

It’s very possible, do you have the same style dash board?

[@fishingwitmariotv9966]

I have that odb but I don’t any options of iPc

[@EverythingWindsor-EssexCounty]

Are you in demo mode?

[@Mykhailo777]

Hello, what to do if the IPC unit does not have a digital speedometer in the selection list? Ford Escape 2013 SEL

[@EverythingWindsor-EssexCounty]

I’m pretty sure it only works for 2015 and up

[@alitaleb2769]

Mine is 2016, followed the steps to show tire pressure not worked any idea?

[@EverythingWindsor-EssexCounty]

Did your dash light go off and on after doing the changes ?

[@alitaleb2769]

@@EverythingWindsor-EssexCounty Yes

[@brodyburgess2121]

What is the difference from "AS BUILT" and the other option that does not say AS BUILT?

[@EverythingWindsor-EssexCounty]

As Built is used if you have a spread sheet with the codes to change.

[@EverythingWindsor-EssexCounty]

Kinda looks like binary. I normally don’t mess with those unless I have the speed sheet. Most of the time the changes can be made through the other option that’s not as built

[@samersleiman894]

Will this work for a 2014 ford focus se

[@EverythingWindsor-EssexCounty]

I been told 2015 and up

[@samersleiman894]

@@EverythingWindsor-EssexCounty I tried it and I couldn’t really do much with the ipc lol

[@morefun6219]

hi can i enable the TSR in my fusion 2018 1.5 without any hardware?

[@EverythingWindsor-EssexCounty]

Let me get back to you on that, I’m out of town and away from my obd2 and laptop

[@morefun6219]

​@@EverythingWindsor-EssexCounty hi did you check it out?

[@EverythingWindsor-EssexCounty]

Hi, Sorry for the delay, Yes the option is available to disable (TSR)Traffic Sign Recognition. It is under the IPC. You will need ForScan and An ELM obd2 with MS/HS Can switch.

[@drhasabo83]

Is it applicable on explorer 2013 ??

[@EverythingWindsor-EssexCounty]

I’m not exactly sure about the explorer, you would have to ask in the forums.

[@kennethparker9840]

Will this work for the Lincoln MKX 2015?

[@EverythingWindsor-EssexCounty]

I’m not exactly sure , I don’t see why not, you could always ask the guys and gals in the forums.

[@apostolllos]

Hey. Will these features be available on a C-Max Hybrid? Thanks

[@EverythingWindsor-EssexCounty]

I don't see why not as long as you have the same dash layout

[@apostolllos]

@@EverythingWindsor-EssexCounty it's similar not the same tho

[@willo458]

mines says, when i click on the chip, that i need an extended license???

[@EverythingWindsor-EssexCounty]

Yes they offer free 2 month trial for extended license. Hope this helps.

[@willo458]

@@EverythingWindsor-EssexCounty got it. Your video helped a lot thanks!!

[@EverythingWindsor-EssexCounty]

That’s awesome to hear, thank you

[@James-dh1wi]

What is all the mods you have done using forscan?

[@EverythingWindsor-EssexCounty]

So far just the ones shown in this video. I will be uploading a video in a few days of basic setup of forscan.

[@Mohammed-co6vh]

Greetings Dear friend, if possible, please help me.I have a Ford Explorer 2012 and I want to add a digital speedometer like in your video, but I didn't succeed. I would be grateful if you could help me.

[@EverythingWindsor-EssexCounty]

I’m pretty sure this is only on 2015 and up

[@Mohammed-co6vh]

Thank you for your guidance. I hope you will be successful and victorious in life. I had another question. In the area where we live, summers are very hot. I want the radiator fan to work at a lower level through the Forscan program.

[@Mohammed-co6vh]

For example, now the fan starts working at a water temperature of 90 degrees Celsius, I want the fan to work at a temperature of 75 degrees with the Forscan program.

[@deputyduck9031]

Did you have to switch anything else? I enabled each setting in Forscan and ran it through. Neither gauge is showing up in the cluster though. Was there something else that needs to be modded to display it? What tab should they be under?

[@EverythingWindsor-EssexCounty]

That was all I enabled.

[@frankmontez6853]

Soo it doesn't have a digital speedometer the 2015 SE ? I was wndering if I just couldn't find it but no it doesn't have it ...

[@EverythingWindsor-EssexCounty]

My car is 2015 SE and it does have it

[@frankmontez6853]

@@EverythingWindsor-EssexCounty how do I get to if ?

[@EverythingWindsor-EssexCounty]

Did you watch the video by chance?

[@frankmontez6853]

@@EverythingWindsor-EssexCounty you added it on , it didn't come with digital speedo ?

[@EverythingWindsor-EssexCounty]

@@frankmontez6853 yes it came with it all I did was enable it

[@jessejames5518]

Have u had the issue of the battery draining while using forscan? I did 2 mods and then the battery went out of juice and the car wouldn’t start

[@EverythingWindsor-EssexCounty]

No I have not experienced that , i start the car while I do this incase that happens.

[@jessejames5518]

@@EverythingWindsor-EssexCounty Do you think it could be because I didn’t turn the car off and on like i was instructed to?

[@EverythingWindsor-EssexCounty]

That’s very possible, I would also try undoing the changes you made to see if it fixes the issue. You may also have a bad battery.

[@jessejames5518]

Yeah my battery was going bad, it was just a matter of time so I got a new one, the only changes I did was enable the cooled seats and heated steering wheel on the sync system. Currently it’s starting up perfectly fine now

[@jessejames5518]

I’m just worried now that if I do more changes I’ll mess up the new battery

[@many001]

what is the name of the application that used on pc

[@EverythingWindsor-EssexCounty]

Forscan . That’s the application to make changes to your car

[@many001]

thanks bro, this feature (adding speedometter) does need subscribtion for the app? or it is free? @@EverythingWindsor-EssexCounty

[@brooklyn_autumn]

I'm so irritated with FORScan. I don't see any modules that show ICP (instrument control panel) or IPC. I have that exact OBD11 and the latest forscan version. You cant just switch the switch to MS or HS whenever because the program won't run - you switch it when it tells you to. I have a 2015 ford fusion titanium. I cant even get the frikin DRL to work only with the high beams and no taillights. I have my car's headlights switched to Auto and when I go from off to Auto...it first goes to highbeams for a half a second and then goes to low beams and even taillights. I have everything switched in FORScan too but it refuses to only use the front high beams. Soooo annoying. The IPC (or ICP) is an issue because it hust doesn't show up. If i was in demo mode (whatever that is)...i wouldn't be able to change anything if that was the case. I seriously don't even know what to do.

[@EverythingWindsor-EssexCounty]

Hi, what exactly are you trying to get out of forscan? I can possibly help you

[@brooklyn_autumn]

@@EverythingWindsor-EssexCountyHi! I just keep trying to use High beams as my driving lights (no taillights) and I have everything set in FORScan that I can see and enabling stuff that I was told. Nothing changes on my 2015 ford fusion titanium. I do have my lights set to auto but everything comes on. I have sync 2 (didn't know if that matters but I want to go to sync 3). I can't get the IPC to show and I was hoping I could set other stuff in there like my side mirror adjusting when reversing to parallel parking, etc. My biggest thing I've been working on is figuring out why my DRL lights aren't going to high beam only. When my headlights are turned to "Auto", I push button start the car and for a split second my high beams come on and go directly to low beams and taillights. Then I need to figure out why I can't get navigation working (I don't need if I need a card, etc, to get all that going). Everything else I can get to change, just not what I mentioned.

[@brooklyn_autumn]

Plus...it woukd be nice to see a completely full list of all the built-by codes and actually just do it all that way. I have ford's full list but we can't see that full list of built-by's on FORScan

[@brooklyn_autumn]

@@EverythingWindsor-EssexCounty ???

[@EverythingWindsor-EssexCounty]

I know the mirrors only work if you have the 3 position selector on your mirrors - as for the high beams thing I have never heard of that one, there is a forum on the forscan website that has a lot of resources, as for a spread sheet I have yet to find one and I don’t usually mess with the as built settings.

[@manuelcruseturner9138]

Never tried forscan yet old people be scared lol

[@averymccoy5624]

what website are you on to do the forscan?

[@EverythingWindsor-EssexCounty]

Do you mean where to get the software?

[@averymccoy5624]

yes like the screen that your scrolling through with all the options

[@averymccoy5624]

yes like the screen that your scrolling through with all the options

[@EverythingWindsor-EssexCounty]

That’s the forscan software, you can download it from forscan.org

[@EverythingWindsor-EssexCounty]

You will also need the ELM327 with the MS switch

[@mrmaxgas]

but digital ? no way

[@EverythingWindsor-EssexCounty]

Way lol

[@choonfeilee6950]

Can u enable oil life percentage?

[@EverythingWindsor-EssexCounty]

On this car it was already enabled , when I select oil life reset it shows the percentage.