My FORScan Tutorial For Beginners!!

[@johnbouldin9033]

Your video was the first one that showed step by step what to do. On the various forums they toss out codes and acronyms but never tell you how to do it. Thank you!

[@johnswilley6764]

It's not focusing because you keep moving the camera back and forth. Thank you for your efforts, believe it or not I really appreciate your taking the time to produce this video. Best wishes.

[@SeanBrennan007]

Purchased the exact same OBDII connector. Glad to see this is what he is using and it works well. I've read that the wireless units don't work as well and can lose connection, not what you want when coding your vehicle.

[@randyearley746]

Sean Brennan have you used it yet? I have a different brand but I’m having a hell of a time with drivers and not connecting to the vehicle. Did you have the same problems?

[@railerswim]

8:49 I work in healthcare IT. So if I screw up on a complex config I can actually impact someone's health/healthcare negatively. So when making major changes I always save often and plenty. Meaning each time you make a change, save the config with a different name that will remind you of what is on there so you don't have to go all the way back but you'll have plenty to fall back on.

[@AdventuringToday]

Great advice!!! Thank you!

[@macmov1]

Just installed oem brake controller on a 2017 expedition, I was a little confused about the hex settings, video made it a piece of cake...thanks

[@chrisholloway2853]

Need to focus the camera. For those that would like to know, the switch is for a medium speed canbus and a high speed canbus. Canbus is the communications protocol used by vehicles . When they first started computerizing stuff in vehicles they used medium speed Canbus. As more features and modules were added they went to high speed Canbus. Consequently today, some modules still run on medium speed and some on High speed. APIM is the main computer for the system. Contains Microsoft operating system etc. There is Sync1. There is also Sync2 which is the same as Sync with Myford Touch I think. Sync3 is the latest which is not Microsoft based. It is by Blackberry and much more stable. Not upgradeable from sync2 without changing major hardware from Ford. How do you know to use the not as built APIM module? Where did you get the spread sheet? Is the spread sheet just for your vehicle? How do you know what module you should be in to find the feature you are looking for?

[@bvbhu3dg]

i Just want to say thank you for this video. I was learning how to use FORSCAN on this Handy tutorial this guy on the f150 Forums gave me but i didnt know how to get forscan to start reading my trucks computer. just programed the OEM LEDs on my xlt.

[@bxodyssey]

Great video. I'd heard of FORScan before but was unaware that you can do so much with it. I still have many questions though. Like Where did you buy the OBS II module (and cable)? Where do I get the actual software? Does it work on a Mac or just Windows? Where did you get the spreadsheet? I think I need to do some more research.

[@brandonr4427]

Great video, definitely made me feel more comfortable about approaching this. My main concern/question is what happens when a new sync 3 firmware comes out. Do you have to revert changes or what? Also, I wonder what dealer technicians think when they see these mods.

[@ozon8r]

Really enjoy the contents of your videos. I have same truck but 2018. Keep the great content coming.

[@StevenApel]

Great explanation of how forscan works! Also, Awesome vehicles! 😉 Thanks! Steven

[@martyw2199]

Thank you. Trying to figure out if I want to invest in ForScan. Your video convinced me to do it!

[@AdventuringToday]

Thank you Marty. Much appreciated. Have fun with it!

[@TimHPop776]

Hmmm... To bad the camera would not focus on the details. Overall good details and info. Question: Does it matter the engine size on Forscan? It is information that you enter into your registration, yet it seems to be more about the Year and model or vehicle than engine size. I am really concerned about getting the details correct for a 2019 F150 Lariat package.

[@TommyTbone70]

Great video. I have one question will this software let me program a AI Proximity key for my 2018 ford escape. I only have one good key tho, Do you know if this software will work with only having one key?

[@live_your_best_life_8]

Thanks very informative video. Where did you download the Forscan software from?

[@markmcgillis1060]

Great video. Do you have vehicle running or just accessory while programming?

[@AdventuringToday]

Sorry for the delay...been traveling. Yes the truck should be running. Good question!

[@Uncle_Buzz]

Badly need one of those spreadsheets for my 2014 STX 4x2 w/3.7 Eco. Is there a repository of these spreadsheets somewhere? Thanks & Cheers, Chris.

[@brianmcgonigal229]

Yeah...you make it look easy...waiting on the adapter so I can get my Puddle, stering , shifter lights to come back on.

[@EverydayProjects]

Thank You! I'm using ForScan too (just beginning) and these videos help!

[@AdventuringToday]

Happy to help...take your time and double check your changes before you apply them...you will do great!

[@lloyde80]

Would this work on lincoln vechiles. I would like to add a oil pressure guage or reading on my guage cluster. Its all digital

[@AdventuringToday]

It should. The key is to get into one of the online forums for your vehicle and see if they have an excel spreadsheet of the proper coding for your vehicle. Or if your Lincoln has a similar model to a Ford then you could try the Ford codes on your Lincoln and they should work. Just be sure to write down the OEM codes are you changing so you have them to switch back to if the Ford codes did not work.

[@sandygrungerson1177]

yeah those bulbs do a great job of blinding oncoming traffic too

[@johnjohnson1313]

My 07 Mustang is having an intermitant problem with the starter relay-pcm-ign switch system. I think it might be a wiring problem. Do you think Forscan would find that? Thanks.

[@mannynm69]

Hey Dan like the video! I have been watching different videos learning a lot. Also gonna try to get my 2017 F350 to run drl lights while driving. Not having all lights on. Also windows to roll up and down along with the side mirrors to fold when I turn my alarm on and unfold when I unlock with my key fob.

[@patrickpower6096]

Did you get it to work?

[@chesterdog7318]

Helpful information. Could you use a better camera and maybe a tripod setup, so the video would be still? Thanks

[@Cody.The.Electrician]

Thanks for the great video! Will be playing with this for sure! Now when removing the module do you need to eject it any particular way or just remove it?

[@timallen1262]

Hi Dan, I have a question, I have a 2017 Ford Super Duty with the 6.7 Diesel. With Forscan I'm wanting to add Show Temps on Gauges. I'm not sure which new code to use, the spreadsheet shows 2 options, Replace ** with E5 with brake controller which I have or A5 adds temps above gauges without adding boost gauge and boost data to menus, yes I also already have the boost gauge. Want to pick the right one the first time so I was wondering which one you used when you changed yours?? TIA!!

[@AdventuringToday]

Hey there...so sorry for the delay...I was traveling for Thanksgiving. I used E5 because I have the brake controller. I am 99.9% sure that one will work for you. If it doesn't...no worries. You can easily change it. I would write down what the factory setting is before you make the change to the new code so you can go back to factory just in case. Hope that helps! Let me know how it works out for you! Thanks again.

[@timallen1262]

@@AdventuringToday Thank You Sir for responding back, seem like we have basically the same truck and I will try that. Again Thank You!!

[@TheCarCrazyGuy]

Do you have a link to the OBD II device you are using?

[@neilwalker5506]

Loved your video (and house and garage!!). I've now joined the Forscan Forum, but I am still scratching my head on how to get the spreadsheets for my 2013 Edge and my 2013 F-150. Any help would be great. Thanks.

[@JG-ss9xy]

Thank you for the vid I just installed the perimeter plus alarm system on my edge 2016 sync 3 and the dealer is charging me 150 just to plug it in and activate that, is not worth it , I will Try with this for scan, but only works on windows?

[@offroadenemy]

Great video, how did you change your sync screen to black back round?

[@kamalaldawoodi5169]

good post ,please I can not reprogram fob key for ford F150 raptor SVT 2011 after I earesed the original key

[@AdventuringToday]

Thank you...I am so sorry I cannot help with the problem you are having. I may be wrong but I think you have to go to the dealer to get this fixed or you could try Autozone. Thanks again.

[@robertnelson5474]

This is a great video. I am going to do the changes on my Ranger and both my Mustang GTs. Also to change the factory setting on the axle ratio as I have changed the gearing. Thank You!

[@gageyesbeck]

Hey Dan, I just bought a 2019 Ford Expedition Max Platinum last month. After watching this video I'd like to make the same changes you made to your Expedition and more if possible. Since posting this video, have you discovered any more useful tweaks for the Expedition that you'd be willing to share?

[@AdventuringToday]

Hi Matt...so sorry for the delay. I actually a have not made any changes since making this video. If you can find a Forscan spreadsheet on the internet for the 2018+ Expeditions that would be your best bet. I have not looked around but now that the vehicle has been out for a while maybe some folks have discovered some new things that can be done. Thank you! Enjoy that Expy! We love ours after 25,000 miles! Getting ready to consider buying new tires to get the wife/kids through winter.

[@gageyesbeck]

@@AdventuringToday Hey Dan, I just made the few changes to my 2019 Expedition Max Platinum by following your tutorial. I was wanted to follow up again to see if you'd had any luck on finding the right code to display the tranny temp in the dash or any other successful mods for that matter.

[@fbirbragher34]

tks.. do i need to be connected to the internet when i use forscan?

[@cryonicsage]

Hi, thanks for the video. How or where do you get the info or coding for each vehicle? Thanks and Happy New Year!

[@AdventuringToday]

Hi...I found my coding on the Truck forums. Best bet is a google search...wish I could give you more direction. If you have a Super Duty then it is listed on the Ford Truck Enthusiast forum for 2017+ models.

[@klaudioradovic]

Adventuring Today Hi I have ford fiesta 2013 but I cant find list nowhere

[@1083dragon]

what , where and reason did you print off theses papers I bought the forscan but have no clue so this maybe helpful to know

[@AdventuringToday]

Great question. If you go to the ford truck forums you can find them. They are usually in a sticky at the top of the groups. Most of what I have seen they are a google doc you can simply print off. Hope that helps.

[@weldingjunkie]

where do you get the spread sheets for all the diff cars? awesome video i was thinking about buying forscan

[@matdin779]

Hi sir i have ford focus hb s+ plan to changes rs front set but different head lamp function how to coding head lamp sir

[@AP-wc5mm]

Is possible to check real mileage with forScan? Thanks

[@hockeyplayer157]

Hey, great video for a first timer. What obd did you purchase?

[@donc9751]

Great info thanks for posting your videos!!! It it easy to tell which version of sync your vehicle has? I'm just getting into it myself because I need a new remote entry key fob for my 2014 f150 4x4 and the idea that a dealer will charge me $120 ($175@ the 2nd one I called) just for the key then $60 to program it just ticks me off for something so simply done by them with software and hopefully almost as simple to me once I get it. I'm glad to hear theres a helpful spreadsheet on the forums for the 150 and hopefully one for an Edge as well so I'll have to search that out. With all the little warnings that concerns me a bit but I'm pretty savvy with tech, not so much mechanic's tho.

[@محمدحمد-ث1خ7ظ]

Thanks for explanation,please I need to know how to get the coding exll sheets that you have

[@AdventuringToday]

I posted a link in the notes on the video. Thank you.

[@sperandio44]

hello, I'm from Brazil. I have a Ford Focus 2016 and I did a Upgrade of the sync 4 to 8 inches and I have a problem now. My sync voice and bluethoot doenst works. I known that make a update using forscan to works. Please do you have a tutorial to me fix this issue?

[@AdventuringToday]

Hi...I am so sorry. I do not know how to fix that. I hope you can get it straightened out.

[@dashcam3098]

How did you get the numbers on top of the heat gauges , was it with forscan or in a menu change

[@cgarcia121473]

Great Video. Can you please tell if the ForScan code works for a 2018 Ford F150 Diesel Sport.

[@AdventuringToday]

Christian Garcia Thank you. I have never tried it on that vehicle. My guess is much of the coding will work just like it did on my expedition.

[@NormSauceman]

I wish I could add a picture here to help show what I am about to describe....I have a 2011 F150 XLT Super Crew. Above the stereo head unit is a digital display. It just sits there..I would like it to scroll either way because it hides a lot of my music information I want to see.....Do You know any way to make that happen? Thanks

[@luisleonard1551]

Hi I been working on a super duty I'm looking for he spread sheet so I can use as a guide for future programming ,can you you tell me where I can getting

[@patlandy21]

I have the OBDLink EX and the latest Forscan. attempting to load the configuration on my 2007 F250 6.0 only produces 7 Modules. PCM, TCM.OBDII,ABS, TBC,IC, AND RCM. The first 6 show under HSCAN, the 7th shows under ISO. I get none of the other modules. I'm trying to get the BCM for tire size. When I try Forscan on my 2004 Expedition the same thing happens. Would you have any idea how I can get the other modules to show up? Thanks

[@germanezequielperez4995]

I have a ford tourneo 1.8 TDDi of 75hp year 2006, I have changed the vp44 pump for a scrapper, and it does not start, it turns the engine, but it does not start. I've been looking at forscan but I don't have much idea how to use it, is it possible to adapt the vp44 scrap pump to the ford tourneo with the forscan? I have an ELM327 ford adapter, and it works with the forscan, but I don't know what function to use in forscan to adapt the pump, if it is possible. Greetings, any advice is welcome.

[@shepherdspie88]

So here is an item for you. I have a 2019 F350 Platinum and it had a recall for DRL that were too bright. The dealer lowered the brightness, but now I think the LED DRL is too dim honestly. Is there a way in Forscan to make the change and make these brighter?

[@AdventuringToday]

Yes...you can go back to full brightness with forscan. Check out line #94 on this spreadsheet. docs.google.com/spreadsheets/d/1qf2gYgkhmsX-dnFO3Ki0nYUvr7aeLKsHsA0WxhDns1s/edit#gid=0

[@stevekellerhals3767]

@@AdventuringTodayBill, I took my 2019 F350 Lariat in for oil service and they did that recall while it was there and yes the DRL are too dim. I want to increase it back or at lease make it brighter. I'll need to see how much the Forscan software cost and get the adapter. Maybe I can give you my email so we can communicate on our outcomes.

[@Merescat]

a bit late to the party but still a great, informative video! Thanks!

[@stevo091]

Hi , i must say it's been a very interesting video to watch. Only one question . How can I change my remote to work with my window closures?. Thanks

[@horsebrother]

does changing my ford focus mk2 hvac digital panel to focus mk3 require a configuration to the ecu?

[@nevillecampbell8019]

That is awesome stuff, where do you get other vehicle spread sheet like the Mustang

[@AdventuringToday]

Thank you. I would dig around the mustang forums. I bet you can find something there. The forums is where I found my coding for my truck.

[@rvadventures]

Did forscan change the license agreement? We use to be able to change the settings. Now it says we need a ext license

[@AdventuringToday]

I believe it did. Bit of a pain now. But still well worth the effort!

[@AutoDad]

Which cable are you using? Can you post a link?

[@AdventuringToday]

Hey there...sorry for the delay...I use the ELM Config wired cable with a HS/can MS/can switch.

[@FordF-Super]

If you have the DPF filter status, do you have the ability to OCR? And have you had to perform one? And can you post a link how to get the DPF status screen? Thx

[@wilburdunn2552]

What Is that sheet of paper called that you are holding. I'm need that info for my 2015 F250 power stroke

[@barrthom603]

NIce job on the video. I got the heated/cooled seats to work. Did you ever figure out the coolant temp coding yet? I tried mine with E5 (I have brake controller), but it didnt work.

[@janekck]

Barr Thom I found information on Mazda forums (same interface) that you also need to change the hex sum at the end. Basically if you sum up all the stock values/numbers in a row, you will get 8 bit shifted hex sum, which should be equal to the last two characters. When you change a value, you need to recalculate the checksum. Hope that helps.

[@Garrett-In-Canada]

I have issue with my wipers not working I just ordered the OBDII tool and the forscan. hoping it gives me some direction. great video

[@yourmom5321]

Garrett Bishop update?

[@Garrett-In-Canada]

Eremie96 ended up being the the steering angle sensor

[@makkial-saboodi3569]

Which one better for reading the codes and program els27 forscan or IDS???

[@elroyvallier186]

Thank you so such for your video however how can I get a copy of Forscan codes for 2015 Ford Explorer

[@AdventuringToday]

Thank you. I don't have them on the explorer...so sorry. I would check out the Explorer forums and search for "Forscan" and see if anyone is talking about it. The coding I used on my expedition were codes I found for Ford Super Duty trucks...F250, F350, etc. Most of the coding worked.

[@garyhile5713]

How do I find a list or spreadsheet of Forscan procedures that can be performed on my 2020 Ford Escape SE? Can my power windows automatic up and down be changed?

[@germanunzner4876]

How do you know from the spreadsheet that they're asking for regular Format and not AS BUILT FORMAT? and what did you use for the rest of the mods?

[@ibrahimyousef6768]

Great info thanks for it, I have question if you can help please, I had a focus 2016 sync 3 with navigation and I already updated my maps to my region F9 maps for Middle East, before i had done it I was having a home screen with navigation but after i did the update and changed my region using the forscan I have now the home screen as it’s a non navigation (big radios widget and compass So if I want to change the home screen from where can i do it ?

[@jakekiddall5108]

This doesnt cover if u need activatiin key? Mine keeps saying no elm found, cant even connect to it

[@phillipschneider9901]

Where did you print out that spreadsheet at for your expedition????

[@AdventuringToday]

Hey Phil...look in my show notes...I included the link to the spreadsheet I used...it's a google doc. Thank you.

[@robertwyatt502]

Very good video on Forscan with one exception. USE A DAMN CAMERA THAT WILL FOCUS!!! I got a damn headache trying to watch it.

[@benriefourie115]

Thank you for the video. I am getting into Forscan and this helps a lot. Question, if I write the wrong code to my car , what will happen? I will save my original file so I can put it back, but will I break something? I have a 2018 Fiesta MK8 Titanium with Sync3. I cant fine any code like you have on the super duty. I did find the excell sheet for the F150 , but nothing for MK8 Fiesta. Perhaps you know where to find for my car? Thanx again for the video.

[@brianfivas6906]

Any issues with programming changes not doing anything in the Truck even though the program changes took place and when I pull it back up in the FORscan tool it shows the change... I have a F450 2019..

[@salehgt46]

Do i have to download a specific version of Forscan for my vehicle or is that one version good for all Fords? I see on the site there are many different versions.

[@LTSRIDE24]

Do you have to have a laptop to use this or are there other options?

[@kristhibodeaux9524]

is it necessary to register with forscan to be able to use the software? thanks

[@Ahmed-yh9yu]

i swapped out my cloth seats for my 2019 mustang for leather seats and they have heated/cooled so i’m wondering if i can add the feature to turn them on

[@adrew1963]

how dod you determine sync 3 and thanks alot for the vid

[@billybassman21]

I have a 2012 ford Escape, I have issues with it shifting hard when the engine is cool, especially on cold days. I have heard a pcm update will fix this, can I update it with this software or at least change the shift parameters?

[@stresd111]

so looking at this from another site I would say any will work? The secret to enabling features is going to be in the As Built Data. ABD. It seems as though all MFT cars get the same APIM and what differentiates the features is the ABD. The ABD tells the car which features were purchased and which to be enabled. ABD is not plain text, it exists as bits. Comparing the ABD of cars with Nav vs cars without Nav should teach us what modifications we need to make. The ABD is NOT easy to access or change and will likely involve using proprietary or expensive software to do so. Ford VCM2 and IDS are a guarantee. ABD is not unique to the APIM, in fact its used in many modules on the car. We are unable to manually change values on the APIM ABD.

[@wardperozuk2782]

So it’s been about a month since you released the video.....any issues (cel or anything like that)?

[@AdventuringToday]

Thank you. No CEL or any issues with either truck. Everything is working perfectly.

[@wardperozuk2782]

Thank you

[@ckelly38237]

What is a CEL issue?

[@wardperozuk2782]

Chris Kelly “check engine light”

[@bennywilks9367]

Thanks for the video, but maybe put some time into either screen recording software or learning how your camera focuses. Your videos would be much better. Thanks.

[@bullboss7698]

If you add the Bambi Mode, can you still turn the fog lights off with the fog light switch ?

[@DynoDieselWagon]

After you changed It to (065) it was still HIGHLIGHTED . SIDE CLICK TO UN-HIGHIGHLIGHT (ON PAD) ..THEN WRITE

[@Maine307]

Hi. I got a 2016 F250 , trying to find where to purchase the right scan tool. Would u send me a link or message on where to get one. Lots of fakes are out there.

[@barrthom603]

Any updates on getting the coolant on the dash above gauge for your expedition?

[@AdventuringToday]

Barr Thom Hey there. I have not tried for the past few weeks. I searched some expedition forums but it seems FORScan is not as big of a deal for this model compared to the F series trucks. My next thought was to search for a f150 forum but have not had time. Thank you.

[@barrthom603]

@@AdventuringToday keep us updated...I tried searching on the expedition forum also...no luck.

[@vickeyjameson5784]

Great video, thank you! I'm a new user and it really helped.

[@TimHPop776]

Have you had to set it back to stock or back to a certain date?

[@AdventuringToday]

Never. I have had the truck to the dealership several times and nobody has said anything about my Forscan changes.

[@hickeya3]

Will that spreadsheet you have work for a 2019 Ford Raptor and if so, where do I get a copy of it?

[@AdventuringToday]

I have never looked for a spreadsheet for a Raptor...but my guess is that it will be nearly identical to what I have used on my 2017 Super Duty and my 2018 Expedition. Try this spreadsheet. docs.google.com/spreadsheets/d/1qf2gYgkhmsX-dnFO3Ki0nYUvr7aeLKsHsA0WxhDns1s/edit#gid=0

[@attackpilot]

Did you find a sheet? I have an 18 Raptor. I was told the F-150 one would work.

[@nizardawood8198]

Hi,I got my BOD 2 when i connected it to my Ford explorer 2017 vehicle using forscan it can not recognize me vehicle it show me connected to Ford focus 2002 ,please help

[@saifalkaabi6195]

Hi thanks for you great work.. How can i get the sheet for f150 2018..

[@denseleit]

Do you need a license or extended licence? I believe mine is asking for it?

[@MrMetalbarD]

great Video , where Can I find The FORScan Codes for 2015 FOrd focus MK3 ??? i Have a Sync2 thank you

[@eduardojosereisdealbuquerq6360]

Hello, how are you? Can you show the activation of the cruise control on a ford focus mk2 and 2.5? I have the buttons installed and the beeps test is ok

[@kotsioschristou8472]

Those papers that you holding on the begin where i can find it for Fiesta mk7 2009 tdci Zetec S?

[@waelbadr4724]

HOW CAN I GET MY CARS SPREADSHEET?

[@dhirmer]

Did you ever get an answer, I just got the forscan adapter and software and would like to know where to get that as well

[@fhood2011]

Design By Dan i need the spreadsheet for the ford taurus can you help bro

[@MJLOVEMJ]

Hello Thats great I wanna ask if u have like this for explorer 2014 I mean coding I'm using forscan but idont have that

[@ukaszrugaa104]

Hello, where to find that excel sheet for other cars?

[@hondaxl250k0]

Dose this work on the obs 97 f250HD 7.3powerstroke?

[@smorrow0816]

How do you see a list of all the options to change for an F150? I know it can do a lot, but is there a master list somewhere?

[@randyearley746]

With that cable, was it plug and play? I bought a different one and I’m going through some driver issues and cannot get it to see the vehicle.

[@AdventuringToday]

yes...it is completely plug and play. Just remember to move the switch when moving between modules. Having the correct equipment when it comes to FORScan makes all the differnce in the world. I have also found the hardwired devices work better than the blue tooth.

[@kristenhorwith5187]

@@AdventuringToday where did you get the cable? I'm adding rear fog lights to my Fusion and would like to activate the rear fog light indicator on my dash.

[@AdventuringToday]

@@kristenhorwith5187 Amazon.

[@buckyjackson]

@@AdventuringToday could you post the model and brand or link?

[@mackglenn2945]

I have a 2013 f150 bout to upgrade it to the sync 3 system....will the four acan be limited.

[@joeblogs1169]

Hi can anyone tell me how to use this device to tell the van to turn the headlight back on after I replaced a blown bulb? I just cannot believe I have got to get involved with all this just to replace a headlight bulb! Thanks

[@lovswr]

I have a 2016 Escape with a START/STOP button & the car will "time out". So do you think there will be any issues with turning on the vehicle (while programming) with a button vs a key?

[@AdventuringToday]

Hey there...There should be no problem using the button vs the key. Just as long as it's running is all that matters. Good luck.