How to Fill and PrimeThe P800 Refillable Carts from Precisioncolors!

To all you current or future P800 owners who may be considering moving over to one of the 3rd party options, here is the video for you.
I show you how to fill and prime these carts with the new PCK3HD inks set for the P800 and P600 printers from Epson!
~-~~-~~~-~~-~
Please watch: "EPSON P800 Chip Decoder unfortunately DID NOT WORK!"
• EPSON P800 Chip Decode...
~-~~-~~~-~~-~

[@robertatchison556]

With it being 2019 now, is there a limit as to the number of times Epson P800 will recognize a Precision Color refill? If it is 30, is that 30 times for each individual color or 30 times total for all colors? Once I reach my limit on recognition then am I forced to only use Epson P800 OEM? Thanks in advance for your answer!

[@cheo1949]

I assume you are referring to the chip decoder board that allows you to reset globally not individual colors but all 9 colors at once. When one color reaches empty you press the button and it resets that one as well as the rest of the colors to full and it does that 30 times.

[@mocos51mocos]

Hello Jose, Just wanted to ask what printer would you recommend for someone who wants to get into the photo printing businesses? I have a job as a bulding engineer but I really enjoy printing photos and the refilling process is just as satisfactorily as printing for me. Printing will be something I be doing after work and weekends.

[@cheo1949]

What will be you size max and volume. Remember printers need to be used OFTEN

[@Serenoj69]

What is the quality of this ink? I want to buy it for my Epson 3800 (although their site is somewhat unclear about it). THX!

[@cheo1949]

Quality? Yes it is very good. Does it match OEM 100%? Of course not, but it is 1/5 the cost of OEM. Watch my PCK3HD ink videos and there I should prints and comment on this ink.

[@lolniahere4292]

Hi Jose I have been made to understand the the chips for the p800 are unstable and do not reset. Is this true?

[@cheo1949]

YES!

[@MijaresDigitalSuperImagenes]

Hi. Thank you very much for the video. I have a question. Can I put ink from an Epson L1800 to an Epson P800 printer? thank you

[@cheo1949]

No. L1800 uses a cheaper dye ink and the P800 use top quality Pigment based ink.

[@MijaresDigitalSuperImagenes]

@@cheo1949 Thank you. What generic ink do you recommend for the epson P800? Can you put Dye ink on the P800? thank you.

[@cheo1949]

@@MijaresDigitalSuperImagenes well...it has to be pigment based and made for it. Where are you located? If in the USA you can buy the best inks for the P800 are from inkjetmall.com and right behind are www.precisioncolors.com but they only sell to USA.

[@MijaresDigitalSuperImagenes]

@@cheo1949 I really appreciate your time to answer my questions, you are very kind. good night.

[@Yalelax]

Jose: I thought Mike had squeeze bottles that can be used to fill the carts. I would prefer to use such bottles rather than the syringes. Elliot

[@cheo1949]

Yes he does. It is the preferred method for refilling carts you would normally fill with a syringe and needle. Simply much more convenient than dealing with syringes I have to wash constantly.

[@nattapongwattanabut416]

Do you know T850x is the same to T853x cartridge (P807) or not? Because I want to use chipless software but I can't find any third party catridge of T853x

[@cheo1949]

The chip will not matter. In fact technically you do not even need the chips any longer according to to them. That's literally why they call it chipless. You will need refillable carts.

[@nattapongwattanabut416]

@@cheo1949 I means is T850x cartridge can fit to my P807

[@cheo1949]

@@nattapongwattanabut416 I don't see why not.

[@nattapongwattanabut416]

@@cheo1949 many thanks

[@faymoo8217]

Thank youuuuuuuu 😍😍😍😍😍😍❤️👌

[@cheo1949]

You are welcome. Thank you.

[@vandalla-pg1nv]

HI jose, so can I do this same process or my epson P600?, because i bought the Refillable Carts from Precisioncolors oo.

[@cheo1949]

No you can not. Those carts can not be modified for refilling. Trust me I've tried. You will have to use the refillable carts

[@vandalla-pg1nv]

Jose Rodriguez , yes i understand, the question was, can i prime my p600's refillable carts the same way you did with the P800, i bought the refillable for the p600.

[@cheo1949]

Those carts do not have a priming port. They must be filled via the Vacuum Method.

[@cheo1949]

Watch my R3000 video. The carts and method is the same kzbin.info/www/bejne/rGeYd3mharyfra8

[@piero9474]

jose my friend what company has good refillable cartridges for Epson artisan 1430 do you have any idea?

[@cheo1949]

Just about any good online third party ink company. Stay away from ebay. If you are in the USA. precisiocolors, inkowl, inkjetcarts.us, inkrecpublic

[@piero9474]

thank you borther you are the printer master!!!!!!!:)

[@piero9474]

My friend jose you you think refillable cartridges are better than ciss because of the air that are in the ciss that can damage the printer right

[@cheo1949]

CISS are very difficult to tune in so they are perfectly balanced and feed ink at the optimal levels. They are also a pain to set up and not have the ink ribbon cause problems as it moves from side to side. I prefer refillables in most situations but I do use CISS on too of my printers. The one I use for sublimation printing and the one I use for overall application of Gloss Optimizer. I have an old video on that!

[@piero9474]

Jose my friend the ciss that you have from what company is it?

[@jeronimogutierrezvalencia4435]

Do you ship internationally to Mexico? I need a kit of these

[@cheo1949]

I don't sell anything.

[@jeronimogutierrezvalencia4435]

@@cheo1949 Excuse me, the question would be, do you know if the company presicioncolors ships to Mexico?

[@cheo1949]

@@jeronimogutierrezvalencia4435 they do not directly but you can one of the two 3rd party shippers linked on the check out page.

[@jeronimogutierrezvalencia4435]

@@cheo1949 Thank you very much, I'll do the shopping and see what happens

[@EncoreWheels]

I would like to place an order for refill kit, but can't get through via email (tried twice) and called a few times. I just wanted to ask if you are still accepting orders online before I place the order.

[@cheo1949]

I don't sell Amy of these carts. Never did. The carts for the P800 have been found to not reset after they reach empty. So nothing out there is currently working so most companies have stopped selling then until a solution is found.

[@EncoreWheels]

Jose: I actually need a kit for the Pixma Pro 100. I just commented on this post because it was recent. I Just wanted to make sure there was somebody there before I ordered online. Thank you.

[@cheo1949]

Well then go to www.precisioncolors.com. They offer several sets for the pro-100.

[@EncoreWheels]

Thank you. Is it best to have two complete sets of factory cartridges so one does not have to keep transfering chips over, other than the yellow, and simply reset them with the resetter? Or, can I simply refill them as needed one at a time -ink gets low, take it out, refill it, reset it, re-insert it?

[@cheo1949]

Yes. Eventually you will damage the two little posts that hold the chips in alingment. So it is best to have two complete OEM cart sets. The yellow original can be use IF you follow my flushing instructions I demonstrated in my flushing video. Otherwise my two flushed and modified carts from PC and transfer the OEM yellow chips to them.