How To Find A Leak And Patch An Air Bed Mattress Correctly

[@naztubez]

This guy is seriously passionate about airbeds, I hear the sincere dedication in his voice.

[@rich369963]

+naztubez lmao ikr

[@Zeeblud-Music]

+naztubez LMAO i was thinking the same thing.

[@srlkngl]

soo glad he talked really really slow ow ow ow..cuz i need to be put to sleeeeep...

[@lostintime8651]

i'm about to inflate mine and rub one out

[@catrashoo]

He really loves his job.

[@ClearAdventure]

I think it's safe to say that we all want to be loved as much as this dude loves air-mattresses.

[@rosemarydean7636]

Clear Adventure lmao

[@joshhutchison6201]

What he's doing is being a contributing member to society. :)

[@todddonatello4177]

Hahaha

[@kate1269]

Clear Adventure OMG! I literally laughed out loud when I read your comment, LOL!

[@christianlvebst1]

😀got me like 😂

[@jono0007]

This is the most soothing air mattress troubleshooting video I have ever seen

[@willest0652]

Lmao

[@scottjohnson378]

How many have you seen? Lol

[@janmarsh4104]

This was wonderful, thank you!!!!! I was depressed and fatalistic, but after following your directions, I am ecstatic and jubilant. AND I found and fixed the leak. You guys rock.

[@samfooz]

Such simple and great advice - thanks! I'd also add, that using a wet palm instead of your lips is a lot of times easier to try to catching cold air leaking from the mattress.

[@MatticusPrime1]

This guy is really polite

[@Geekygirrls2014on]

+MatticusPrime1 He sounds like a young priest. :)

[@helvetecaLLC]

I did the lick the lips method and dragged my face along the mattress. Boyfriend walked in, walked straight out.

[@kristinroney7591]

helveteca hahahaha. Ohhhh that made my night. That was great.

[@lisaj2892]

😂 😂 😂

[@rehmsmeyer]

You will have that.

[@nicetimefuntimes7532]

Lmfao😂😂😂😂😂

[@eduardoxmenezes]

ahhahaha

[@K373]

You could also inflate the mattress then stick a flashlight trough the inflation hole while in a really dark room and the light should come out of the hole

[@trishoconnor2169]

ingenious!

[@jordanpenman8766]

how are you supposed to stick a flashlight through the inflation whole while it is inflated?

[@D4n21]

LOL looks like his suggestion wasn't ever tested in practice

[@MZhris]

Jordan Penman it takes 1 second to check for light escaping, that's way more than enough time before full deflation.

[@chef5702]

Kebab thanks i did that found the hole

[@jupru220]

You can also use really heavy-duty duct tape if you can't find your patch kit. I always do the big glob of glue, then heavy-duty duct tape. I think that I use waterproof marine glue.

[@JK-ig9tr]

HEY, this is the FIRST repair video for an air bed that I've seen that actually WORKED🥰😍. Thank you very much for advice that works. Note to others, he does mention in the comments that side seam openings are very hard to fix and may not be repairable. The other punctures, FIXED!!

[@crand20033]

I never had a leak on the bottom. It's always in the top and on the seam of one of those little areas that go down.

[@showboatvip7890]

thanks, I been looking and looking. I'll can't find it. I'm gonna focus on the top.

[@stephanieT83]

Me too on seam

[@rheaangela9288]

Me too on seam

[@back2basics997]

Same

[@flagmichael]

Yep - a seam. About a 1 mm separation.

[@CDGMR1]

Glad I found this video. I paid $125 for my airbed 2 years ago and now is loosing air

[@IsabellGreen]

I want him to read me a story, tuck me in, and then a lullaby......

[@airbeds4less]

Seams are definietly more difficult to patch but there are a few things you can try. Using a self adhesive patch you can apply force to the seam with the patch on and most of the time you can get it to seal well. Definitely the hardest patch to make though!

[@vfbaby2011]

I love his passion and tone of voice.

[@mhc562]

Thank you thank you! Your video helped me so much. Followed all the steps and waited 4 hours afterwards. My air mattress is good as when I first got it. Finally getting good rest again.

[@johncoops6897]

You'd get a LOT better rest if you bought a proper mattress.

[@alicezavaletta5250]

AYYYYYYY I FOUND IT! Patched it with super glue and tape. You're the best bud. ☺️

[@OCWatchMods]

you have a very special relationship with your air mattress

[@iamleximusic6251]

😂😂

[@ashleystroebel1018]

Stop it, get help😂😂😂😂😂

[@catlemurgt]

The lip trick helped me find the puncture in my mattress and fix it instead of buying a new one. Thank you!

[@larcorba]

I can go sleep now, all calm. Thanks soothing airmatrass dude

[@WandaEby]

I finally found the leak I had in air mattress...thanks to your "wetting your lips" trick - took me less than a minute to find. I was going to use the messy soapy water next if I could not find an easier solution fast. :D

[@ente9161]

Ok, Wow. I seroiously did not expect to find the hole in my huge airbed this way, but I did! Thank you so much!!

[@urgulp1554]

"So sit back and let us help you find the hole".

[@Geekygirrls2014on]

+Ur gulp 13 year olds really ought to go play Minecraft and stop commenting promiscuously.

[@bbpgurl]

😂😂😂😂

[@urgulp1554]

TheGeekiestWoman Prudes better find a time machine and get themselves back to Victorian times.

[@UnknownButKnown15]

Ur gulp 😂😂lmao

[@WavyKiing]

😂😂😂😂😂😂😭

[@charwalker26]

i feel oddly comforted by the timber of his voice...

[@Versushi]

oh my god hahaha

[@keybobrob1]

i guess it is odd to feel comfort from a "woody" voice,..whatever that is. Unless you meant to describe the TIMBRE of his voice. ;-)

[@socal114]

Good video which turned out to be very helpful. My puncture was in the flocking material and I had no idea how to remove it in order to patch bare vinyl. Thank you!

[@D4n21]

Worked like a charm on a mini-air filled seat cushion that has been leaking for ages!! :) Great fix! (Specifically the wetting your lips maneuver)

[@TeslaDRay]

for me i use a single (low to the floor) twin Intex air mattress. they're cheap and the most comfortable and i'm always careful. i use it because i'm a stomach sleeper and is the easiest on my back for that, but it seems after only a couple months every time, it eventually shrinks. nothings been stuck through it and i put 2 underspreads on the bed (one for each side) to prevent any debris from embedding to the material. all my leaks happen on the the seam of the top of the beds (the phelt side). i'd even apply the patch to it in the past but air always escaped so i stopped bothering and just chucked it each time and bought a new one. they were cheap enough. i hope this video addresses the seams wearing away too from nightly use, even though i'm extremely careful how i handle it.

[@sheliapea1387]

TeslaDRay I read a "seal a meal" works on the seams..may try when that time comes.

[@CaliMaxe]

​@@sheliapea1387 how would that work? Lol

[@briansmobile1]

I was SO ANGRY to find my air mattress was leaking! Now having watched this video- I feel much calmer. Trouble is I don't even care enough to fix it now. Oh well.

[@stellajones7460]

Lol

[@therealmelissabanks9202]

briansmobile1 zv dgaf t

[@donmahu9952]

Wat kind of air mattress do you have N where r you from

[@jlo...6254]

Please explain... Did you get a bed?? Yeah, jus curious...!!Lata...Jeanne🐸

[@sburight]

SAME 😂

[@sokr418]

took me 2 minutes finding the leak after this tutorial. Great vid! Thanks! (1k likes!!)

[@MZhris]

sokr418 took me 1 minute. I win

[@MidniteAssassin2]

Video was very helpful, instead of using my face though I just sprayed water on my hand and found the leak

[@mikex8254]

surely they could make airbeds more puncture proof by using thicker gauge pvc. problem with these airbeds they dont use thick enough gauge pvc

[@ralphfinley184]

USE PVC ADHESIVE , ITS WELDS THE PUNCTURE

[@johncoops6897]

@@ralphfinley184 - since you're such a clever DIY man.... Fix your broken CAPS LOCK KEY, you ignorant dick head..

[@colewho8913]

John Coops woah John you’re ruining the soothing vibe of this video

[@mike1005ful1]

At 2:15 it gets sexual.

[@tinafama2587]

Michael X lmao

[@mdkvisions]

IM Crying lol !!!

[@pamcole5245]

Too funny

[@joyval7578]

jajjajajjajjajjjaa

[@clarissaespinoza7535]

Michael X lmmfao

[@wanderlustspirit4607]

My wife thanks you for helping me “find the hole” 😂

[@dajoliemakutano4914]

Goodness 😀 you did found the “hole” Congrats

[@MrHeem94]

Great. Now make sure you lick the hell out of it.

[@brettt4654]

@Wanderlust Spirit @BoscoMoney you people are a bunch of freaks. so innapropriate

[@ashleystroebel1018]

😂😂😂😂😂😂😂

[@ashleystroebel1018]

Wet lip trick right?😅

[@philklingensmith3179]

Hey I really appreciate this video. I had a leak in the bottom of my air mattress that I found with feeling the air on my damp lips. I first tired just listening and seeing if I couldn't feel in on my face, but the damp method worked much better. Actually it seemed to be three very small slits in a triangle 1/2 in triangle patten. That made no noise and were very hard to feel even with this method unless I had the mattress really full and I was putting a lot of pressure on it. It would only go down just a little after sleeping on it for several hours. I tried the soapy water method suggested in another video to verify, but it was difficult to get it to bubble. Much more difficult than feeling the air against my wet lips about two inches from the mattress. Also I have small inflatable back pillow that likewise had a hole, but would take and hour or two to deflate leaning against it. This method worked very well for it too, but of course was much easier to find as the surface was much smaller. Thanks again! :)

[@crystalgreen1252]

This guy definitely throwing king hill propane vibes lol. Love it!

[@mildridj3423]

Since you are using all of that glue, what if some gets in the hole and adheres to the bottom of the other side, what will happen when you attempt to inflate if they are stuck together?

[@horsedikdotmpeg1]

Try licking a queen size one,LOL!!I'd use dawn soap and water in a spray bottle for the vinyl sides/bottom.Most of my failures are through the automatic pump.Air goes in yes,but goes out same outlet when you sleep. Do yourself a favor,get an air mattress that automatically keeps your airbed the same pressure!!If it's not automaticaly controlled,don't waste your money!!!I've gone thru a ton of them,especially with the brand name that starts with I and end with X.

[@shaahinpc]

Just now I fixed my bed!! Thanks bed MASTER:)))))

[@gyromatical]

I picture their returns department being full of mattress lickers

[@hillaryclintonsracistkaras1720]

*LOL!*

[@wildmustangart1577]

is that a step up from window licker??

[@DaBorderhopper]

how about flex sealing the entire bottom half....

[@thatoneguy6725]

MCrowley138 probably only need to flex seal 4 inches around the hole

[@sherylmcguire1790]

But if one doesn't know where the hole is. This Flex Sealing would save 3 air mattresses for me!

[@Lovelace069]

MCrowley138 gooooood idea!!!! Thanks from the ladyin the plastic taco shell.😉

[@icsisbrockman2174]

MCrowley138 i cant find the damn hole in mine so i think im gonna do that sounds like a good idea 👍

[@tiffturg]

I love my dog pump it up at night, turn the lights off, shine a flashlight through the inflation hole and look for a pin hole light in your mattress. Works faster with another set of eyes.

[@translated3249]

We are so poor we only have an air mattress and sadly my 6 year old jumped on it today and punctured it. :( there is a gaping hole on one of the seams so on the floor we go...

[@cynho3093]

I have slept on a single width air bed every night for years but the beds only last a few months with daily use. Only 1 had a repairable hole all others were in the seam. If you sit on the side of the air bed, you will weaken the seam - usually the bed is useless any time I sit on the side but it's hard to get out of bed without sitting on the side. I try to roll in & out of bed instead. I have found that a mattress will last MUCH longer if you can support the seam. One way is to put a firm foam strip (about 8" thick & wide) next to the seam so when you put weight on the seam edge it's supported. BUT it's hard to keep the foam in place. My recent "trick" was to take the last dead bed & cut off the end & slit all but one side of the inside supports (so that the last inside support next to the other side seam is fully supported) & slip the new uninflated air bed inside before airing up. In theory this should disperse the weight off the seam & this recent bed has lasted 4 months so far. Unfortunately this makes the bed smaller, next time I am using the old twin (& removing ALL inside supports) & inserting a full mattress which is 14" wider & see if that will work. Another suggestion is to goop ALL the seams & let fully dry BEFORE using the air mattress but I've never actually tried this. This may give the seams extra support. I did try taping all the seams with wide packing tape on one bed BEFORE using & that was worthless. I buy my beds during the winter from Walmart & paid $8 for them last time, usually $15.

[@MrHeem94]

I licked my air mattress for 2 hours yesterday trying to find the hole. 2 HOURS! And I STILL couldn't find it. I'll give it another shot but no more than 3 hours this time.

[@sconnieknd3]

I've been using airbeds indoor about 3 years and when it get Broke or something like that i use crazy glue or the better "gorilla" brand and few cuts from an old airbed (just the top side of the airbed) then i do what this guy just said and thats how i fix my airbeds ...it work!.

[@kdavis114]

(also..if you own a cat, lock the bedroom door! My cats have cost me a small fortune in air mattresses and lost sleep!)

[@johncoops6897]

The obvious solution is to buy a PROPER MATTRESS.

[@MeredithHammett]

My cat sent me here to these videos. 🤦‍♀️

[@MeredithHammett]

@@johncoops6897 no shit. You got $ to give us for that option?

[@kdavis114]

@@MeredithHammettthe best solution I found was to get a heavy quilt that covers most of the mattress. (Or lock them out) I've gone thru at least 10 mattresses due to my cats.

[@kdavis114]

@@MeredithHammettthe best solution I found was to get a heavy quilt that covers most of the mattress. (Or lock them out) I've gone thru at least 10 mattresses due to my cats.

[@fluteloverskh6777]

I like it!! We bought this and leakage near the whole from where we fill air, what should I do???

[@johncoops6897]

1. Learn how to spell. 2. Repair the leak

[@fluteloverskh6777]

@@johncoops6897 Learn how to spell What u mean?

[@johncoops6897]

@@fluteloverskh6777 - On a flute, what is the name of the place that you cover with a finger to change the note that gets played?

[@airbeds4less]

108travel, if you lightly sand down the flocking/flannel material until it feels like the actual vinyl, you can then patch it in a more secure and easier manner.

[@satnitcboy]

Decent advice. My method: First, vacuum the mattress using the narrow wand tool to get rid of dust and dirt that will make visual identification difficult. Then: 1. LOOK - some cuts or punctures will be visible. 2. TOUCH - slowly move your hands over the entire mattress, at a distance of about 1/2", to see if you can feel air leaving the leak - rather than wetting my lips, as in the video, I'd wet my palms. 3. LISTEN - in a silent room you can often hear the air as it exits the leak. Ear to the mattress is not quite as unappealing as lips to the mattress! If possible PLACE THE MATTRESS ON ANOTHER BED OR A LARGE TABLE while you do the work - the harder you make the job, the more frustrating it will be. Note: You might find an extremely small leak by touch or sound that you can't quite see. Just a little soapy water on the spot will produce a bubble - that's the bicycle repair way. Prevention is really important: I put a clean quilt or packing blanket on the floor to protect the mattress from anything that could puncture it: something sharp in the carpet, or a sliver or pin, etc, stuck between wood floor boards. If people will be going in and out of the room where the mattress is being used for more than one night, GET IT OFF THE FLOOR - either deflate and put in a corner, or upright it and lean against a wall. Don't let kids play on it, and keep pets off, too. Roll it up carefully when you put it away. The smaller you make it, the better. Be sure there is nothing left on the mattress as you roll it up - a ball point pen, for instance. Try to store it in a box, where no tools or sharp objects in the closet can get to it - Storing my big Intex mattress in the bag only led to a cut from something - I'll never know what - going right through the bag into the mattress. ANYTHING sharp will want to make a cut or puncture if it's in contact with the mattress.

[@jtbburch4674]

Thanks for the info. Very helpful.

[@zoey9785]

Tom Crisp What kind of glow do i use coz mine is intex as well and we dont have the repair kit in Egypt any kind of good glow ????

[@Lovelace069]

thank you thank you and gew whiz thank you. I'm laying in a taco shaped bed right now. .frustrate with his blow or hear technique. You could totally make a video. I'd watch it several times. Thanks

[@Lovelace069]

gee** and frustrated* * I blame the sunken bed for all typos. 😊

[@TruthMusicStudios]

It would be nice if you left links to where we can buy the patching materials

[@margaritaavila2778]

Truth Music Studio Google it Walmart, Home Depot, Lowe's, eBay.

[@bfpierce]

Margarita AVILA --people are literally glued to their cell phone all day yet don’t know how to use a search engine. Or look for a how-to video like this one.

[@zombie21boy]

I play this video every time I get ready for bed. 🛌

[@Madness832]

I have an 2-month-old Intex twin airbed that's very similar to the one in this video (the flocking is of a lighter shade). A few days ago, it developed a leak at the end of one of those seams, running down the top (to make it look like tuck-and-roll). A split, at the half-rounded end, where the seam joins the rest of the bed. The bed did come w/ some patches, but no glue! What brand of PVC/silicone glue would work best? Or should I just go the suggestion of other videos & grab a bicycle patch kit?

[@kdavis114]

Make sure to stay away from Coleman brand air mattresses. I've tried them all and Coleman's are junk!

[@Sleepyhollow77]

Agree all are junk that I purchased

[@SignedOff402]

kdavis114 i disagree. However, I did buy an Intex from Walmart for under 8 bucks and it leaked from the moment I inflated it. My Coleman never deflated. However, I placed a space heater too close to it and am here to inform you, plastic melts.

[@whatfreedom7]

My intex lasted one use then it started leaking. They are just junk.

[@SignedOff402]

whatfreedom7 Design is faulty, inferior product and probably why they were on sale - but even those at an upper shelf, that can inflate and remain inflated for initial uses, end up leaking air as i think the stretching can only go so far and then, the seams are compromised. We are using up all of our resources to produce products which end up in the dump. It’s criminal.

[@bloomer3638]

Coleman is the WORST!!... I DESPISE THERE PRODUCTS AS PASSIONATETLY AS THIS GUY IS ABOUT AIR MATTRESSES

[@Yommi20000]

I don’t even have a punctured air mattress, but I watched this cus it’s gonna be useful some day

[@sylviomaronn2694]

Found it! Thanks for the video. It's as simple as it is.

[@mollyg8459]

I'm glad I looked for this video before taking mine to the tire shop 🤭🤣

[@elizabethgilbert3611]

Thank you so much i knew i could save my mattress i didn't want to have to buy a new one , again thanks.

[@HandsomeSwede]

Your tips got my mattress fixed. Thanks!

[@airbeds4less]

It is mor difficult to patch on a seam but if you use self adhesive patches like the TypeB vinyl patches. Sometimes placing a small patch over the whole and then a larger patch over top of that can help it seal better.

[@bobknoxious5949]

Put a piece of papwr towerl between weight and patch so if there is some extra glue it dosnt stick to the weight and peel off your patch will you pick up the weight off the bed

[@jrj90620]

An easier way would be to just put some Goop or E6000 on the hole.About the size of a quarter would be enough.Should work,even with the felt still on.

[@loudeearmy6832]

I'm stuck on lick the lips part! True genius🤗🤣

[@carriesf2369]

Applying a patch advice: Make sure all the air bubbles are out. If you are using a clear patch, you can usually see these quite readily. If you are using a colored patch, you can usually see these if they are big. Try running your finger lightly across the patch to see if you can feel any small lumps. Regardless, you should presume there a few tiny air bubbles. To fix this, use a fingernail or spudger to work out the air bubbles from the center outwards. *apologies if this was already mentioned

[@martinvanschalkwyk2001]

A stupid idea that might work. Fill the bed with water to detect the holes

[@thatoneguy6725]

Martin Van Schalkwyk bed would get heavy as fuck. if it didn't explode it might just poke more holes

[@sherylmcguire1790]

LOL the lengths we will go to to fix these things!

[@chalee3484]

You could also wet the air mattress with a rag and some water, to easily find the hole. And make sure the mattress is well pumped. Then in total silent listen👂🏽.. The air mattress will start whistling like pewwwwwwwwwwwwwwwwwwwwwwwwwwww.. there's your leak. You're very welcome😏

[@MZhris]

Cha Lee orrrr piss on it and look for air bubbles.

[@tiffturg]

Cha Lee or wait till night time, pump up the air mattress, turn off the lights, shine a flashlight through the inflation hole and look for the pin light hole shining through the air mattress 🤷🏻‍♀️

[@qbw8834]

what if the problem is in the valve... how do u take out the valve

[@suzannepalmer8684]

Yes. That's whats going on with mine, do I glue all around, or what?

[@asiawakabayashi2668]

QbanWay 88 0

[@Laciesgrl33]

Do you have a video for finding a leak in an EZ bed? That would be helpful for me.

[@michaelromero8221]

Thank you for the tip to check the bottom first!

[@RedDiamondXYZ]

how to find the puncture? where to get the patch? what sort of glue is required?

[@Sarafina27]

Thanks so much for this. I went out and bought another bed not knowing I could do this. I use the glue and duck tape plus a 15 weight to hold it down. Hopefully I can sleep in my bed tonight. Oh My kit didn't come with glue but a piece of tape instead?

[@airbeds4less]

What you are describing definitely sounds like a seam that has come loose. Unfortunately there is not a way to repair the seams on an air mattress. Sometimes depending on the extent of the seam tear you can sometimes flip the bed upside down and get some use out of it. That doesn't always work, but unfortunately is the only option we know of when a seam comes un-welded.

[@InBetweenMen]

Question: I found my hole and of course as luck would have it, it's not in any location that any KZbin tutorial has an example of how to fix. It's not in any "easy" place, like a flat spot or even a curve, which is what every video uses as an example. No, mine is a hole right the corner where two seams meet. Where the vertical and horizontal seam meet on the corner location on the suede side. (Have a photo to show if there's any way to send to you for reference). Right in the 'T' seam where vertical and horizontal seams meet on the suede part, in the right corner between the head side and the right side (both suede). It's right up against the seam. And the seam is obviously a bit raised higher than the hole so I'm not sure how I can get a piece of duck tape over crazy glue over the hole because the seam will prevent the tape from being 100% flat and flush on the material. Also Idk how I can shave off the suede in such a difficult spot. Any advice?🤦🏻‍♂️

[@TheWakeOfRedemption]

I have found the hole on mine problem is it's right in the seam on the material side. It'll be a tough one sanding that area clean. My Intex air mattress didn't come with glue just adhesive paper.

[@carmenjohnson1988]

Ok so what if the hole is on top in the seams area? I have bought a lot of air mattresses in the last 5 years and they are the 22 inches high intex,not those that are what 5 or 6 inches high. I like to make sure my peoples are comfortable and the last last one I bought lasted almost 2 years until I went away for 2 weeks and came home to a mattress that had a hump in it because the seam came apart and now it has a pin hole. Why the pin hole always ends up in the seams.

[@butyoucancallmesam]

This video help me find the hole in our mattress.

[@raymondray3232]

I lost the patch kit can I use super glue instead and trusty duct tape?

[@dorreolrailey5908]

Yes

[@UR2Compliant]

1:40 That's what she said...

[@airbeds4less]

In stores you can look for Vinyl repair kits. any brand will work great as long as it is specified for use with Vinyl products! Tear-Aid is the best brand we have found and stock them on our website!

[@spooky6832]

when the glue goes through the hole and seals the punctured side to the other side, then what do you do???

[@ComradeArthur]

How many hours does it take to pass an ear over every square inch of a mattress?

[@johncoops6897]

None.

[@caroldonahue4290]

worked like charm...found my leak in 5 minutes;)

[@ibcoull]

About half the battle is locating the leak(s). Wetting a hand and passing it around the exterior of a fully inflated air filled object works well to find those pesky small leaks.

[@TheCat86]

Thanks! That's was really helpful. The whole was on the bottom side and found it simply by hearing.

[@johncoops6897]

So you really were too stupid to work out such a simple thing by yourself? WOW.

[@AustinOmoria]

Thank you for the video. Mine is leaking on the side where it is joined. Please where do I buy the patch and glue? Thank you

[@ralphfinley184]

Use Pvc adhesive no patch

[@AustinOmoria]

@@ralphfinley184 Thank you

[@AustinOmoria]

@@ralphfinley184 If you can also do a tutorial on that, it will be highly appreciated. God bless you.

[@babyblu5590]

Better if it's slightly inflated I think so that the drips and excess don't stick to the other side since the liquid tends to spill through especially for larger holes.

[@cheriep9831]

What should I use to get the flock off for repair.?

[@truejey7475]

Will bicycle tube patches work? Or what kind do I need ? Thank you

[@potatochips829]

What about tempature during day it makes me mad as hell when I lay on my air bed and it moves and feels like a damn water bed

[@johncoops6897]

Not sure what the fuck you are babbling about. If you don't like your cheap inflatable mattress, then go and buy a proper bed.

[@happychaosbikelab]

Does/Will this work if your air mattress has a felt top covering.

[@brendahubbard2547]

I've never gotten a leak in the bottom of my air mattress it's always been at the seems until today and my dog stuck is nail right through the top of it. so as far as glue goes what is the best to use. because there was no glue that come with my patches.

[@ashoknikalje417]

I loose my airbed nozzles cap not able to find any solution??

[@bookofachievers440]

This was really useless for me, Those steps to find the hole will only work if the hole is large enough, which in my case isn't. My mattress takes about 7 to 8 hours to loose air so the hole is obviously tiny.

[@showboatvip7890]

Exactly, that's what mind is doing. I've looked hard.

[@DomoKunLove]

Mine was the size of a pin drop on the top of the felt .. I had to listen very carefully . The licked lips method worked for me , and I had to blow it up all the wayyyyy

[@ralphfinley184]

Use pvc adhesive

[@MaleficHuman]

bro the intel airbed comes with holes at the top they purposely put holes in i got one and as soon as i laid down i felt air all over my neck and lower back and im not big im 5,6 105 pounds so i clearly did not put those holes there

[@bfpierce]

AllWill FallToMe -Whaaaaat!?

[@vikinggrimm3139]

I patched mine on the top where the flocking is, by using super glue GEL and then pressing a paper towel on to it. Allow that time to dry and apply another layer or two then tear away excess. It's not as pretty as a patch but who cares? The bed is covered with a sheet anyhow. Did the same on the sides where the seems come together, this seems to be another place holes commonly occur.

[@jaredhammonds8255]

Can I use superglue as my adhesive or does it have to be a certain kind?

[@sriharshacv7760]

I wasted 40 minutes looking on the under side when the puncture was on the top side. In my case, I figured the hole by groping systematically. (I know how it is sounding but that is what I did.). I sealed the fuzzy side by removing the fuzz by using a sand paper first till I see the skin (Urgh. This is getting weirder).

[@jessicarosario3926]

If the air mattress holds the night but once u come back from work its lost a lot of air do u thinks it's a whole or the temperature change ?

[@airbeds4less]

It's true, we want to try and help that with this video but those Type B "Tear-Aid" brand patches will work great to fix the beds, that's what we use in all of our repairs.

[@colecormier2797]

I'm wondering if shoe goo and gorilla tape would do the trick as well. Worried about using Krazy glue or similar types of adhesive where if the material moves the glue is likely to crack. Any have any experiences with this?

[@johncoops6897]

Of COURSE it doesn't work. Buy the proper glue and patch, you idiot.

[@sibalogh]

What's the name of the glue and where can you obtain it from?

[@MrVman202]

Lol I clicked on the video and thought duck tape would do...mannn I was wrong lol

[@kingzofkings2824]

lol😂

[@VanDarkholm]

Yeah my dog made a small hole and I went a little overboard on the duct tape... It didn't fix anything

[@yuridia731]

Same here ughhh

[@roxannajohnsom7478]

Our dog made the puncture wound and we were putting on duct tape while watching the video, @@VanDarkholm

[@dracojensei1141]

Same

[@BewareTheLilyOfTheValley]

Might have to sand down the hole I found in my mattress today as I'm still losing air. It's a 20 inch mattress so it has a bit of heft and I've rolled the thing around four or five times today trying to find where I'm losing air still. I don't feel anything from the current hole, but I just slapped another piece of adhesive over the first one, just in case. I rolled that bed like a Katamari ball and have yet to find another source of escaping air. I heard valves can also be weak and yet I still don't feel air from it. I'm miffed and I just know at 5AM yet again, I'm going ti be in a taco on the mattress. I so can't wait until I buy a proper bed next paycheck...I'm spending my days off troubleshooting my bed and can't even sleep in or take a nap because of it. Sleeping directly on the floor again might be a better option to this song and dance. For shame, this was supposed to be my guest bed once I was done with it. I have a Bestway mattress I got from Walmart. I loved that bed until today, lol.

[@kkhlufris]

Use soapy water to find the hole Just use super glue and baking soda, doesn't look good but works so well n super cheap. 2 3 drops of each and you are good to go

[@BewareTheLilyOfTheValley]

@@kkhlufris I've already found the hole but even after sanding the spot down and applying the adhesive, then adhesive and tape, air still leaks out. I have zero cash until next Friday to buy super glue, lol! I've decided to just make a pallet on the floor and tough it out. I slept on the floor the first week I moved in, I can bear with it one more week.

[@laureleccleston7655]

Found the leak in less than one minute. Sanded the flock of the airbed. Now can see the hole in the mattress clearly. Also next to leak is another puncture without a leak that I have patched. Thank you Air Beds 4 less.com. You have customer for life!