How To Find & FIX Hole in Leaky Air Mattress -Jonny DIY

[@JonnyDIY]

*TOOLS & SUPPLIES & DONATION LINKS* SLIME Patch Kit- amzn.to/3yx4hQW Sandpaper- amzn.to/3wsg94S Spray Bottle- amzn.to/2RDfyyN *If you Enjoy the Channel Consider Helping Support it by Donating below & by Subscribing.* *PAYPAL DONATION* www.paypal.me/JonnyDIY *Zelle Donation* [e-mail] *Venmo Donation* [e-mail]

[@truthneverchangeswakeup2762]

Thank you you gave two solutions to one problem. That's the way I look at problems find the solutions 🕊️

[@JonnyDIY]

@@truthneverchangeswakeup2762 you're welcome, glad I could help 👍

[@kristafoster7190]

Always use hot glue make sure your hot glue is the hottest like taking a red hot spoon and melt the glue in the spoon and pour it on the hole

[@epicproductions8212]

Sweet dude, super useful,thank you!

[@JonnyDIY]

@@epicproductions8212 you're welcome, glad to help 👍

[@jonb2756]

Usually around 226am I get a major rod that won't go away. It leads to a sore back.

[@JonnyDIY]

Sorry to hear, your back will be better off if you just deflate it all the way and sleep on floor tonite until you can fix tmrw

[@christianalexander579]

You didn't even put the colons between the numbers

[@joejoelesh1197]

About the same sprung a leak ~0230. Got a cot set up by 0315, but can't sleep thinking about my leaking $200 air mattress so I am watching this a 0330.

[@sapphire-goddessspiritualg4445]

Lmao same! Smh

[@jonb2756]

@@christianalexander579 you didn't even put a period at the end of your sentence.

[@FulyKuly]

The worst feeling in the world is waking up at 4am on a deflected air mattress

[@JonnyDIY]

Sorry to hear, hope you can get it fixed 👍

[@Kre8iviT27]

Lol. Feeling like the meat in a taco.

[@JonnyDIY]

@@Kre8iviT27 haha thats what I always call it "taco bed"

[@Leannot35]

Yes this seems to be every night as soon as I find a hole and patch it another one starts, I don't want to wake anyone up in my apartment under me, so I got to deal with it till later morning 🙄I'm buying another one, so when this happens, I have backup, or I'll have a comfortable couch soon

[@TheLorque]

I literally juts woke up at 4am on a deflated air matteress and hopped onto KZbin to a find a way to fix the leak i found 😅

[@raymondrizzo284]

Thanks! Can’t wait to try this to fix a pretty expensive inflatable bed. I really like the fact that you included the “fail” as I think that is important as well.

[@JonnyDIY]

You're welcome, happy to help. Haha yup it happens! Good luck 👍

[@laurenkelly3206]

did it work?

[@nomadoftheuniverse]

Thank you! I finally fixed our airbed and saved it from going into landfill as well as from spending money on a new one.

[@JonnyDIY]

Awesome! You're very welcome, glad I could help you out 👍

[@otroems]

i really appreciate you post the fail and then the good fix

[@JonnyDIY]

Happy to help 👍

[@kwikflikzyakadventures3795]

Thanks Johnny DIY, tried for months to find a leak in high Airbed, plugged it in and blew it up in a quite room and found the leak in seconds, patched and all good, cheers.

[@JonnyDIY]

Awesome, you're welcome. Happy I could help you out 👍

[@DebiQ1830]

I LOVE that you included the fail!!!!

[@mountiescorner]

Same, no one does that anymore even though it’s realistic. Props to this guy for being real

[@damnhandy]

I love your room's totally cluttered lifestyle look. I'd feel right at home in your place/crib/pad/digs. (I'm 70, so not sure what they call an apartment these days.) Thanks for the tip. I'm sleeping on two deflated air mattresses.

[@JonnyDIY]

Thank you! Good luck on the patches, hope you can get a "soggy" free mattress nights sleep 👍

[@theresadaly6318]

I had a go spraying the bottom of my queen air mattress with soapy water this morning and around the little plastic panel where the electrical works are....nothing, nothing. I felt so deflated I dried it off and went to run some errands. When I got home I thought well, might as well try the other side since I've come this far but I needed to top up the air. Switched it on til full, went to shut it off and VOILA!! Little BUBBLES at the switch from this mornings water! THANK YOU THANK YOU! I never expected the leak would be there.

[@JonnyDIY]

@@theresadaly6318 You're welcome, happy I could help 👍 Hope you can get it fixed or get another bed 🛌💤

[@dadou0387]

Thank you so much. I was about to throw away my air mattress but now I’m going to buy that kit instead and fix it confidently 😊

[@JonnyDIY]

You're welcome, glad I could help you out. Good luck 👍

[@RadioWendy22]

My hole is on the top part with the fabric. I'm doing all the steps, sandpaper & all. I'm praying it works cuz its already 2:30am & I'm EXHAUSTED!!!

[@JonnyDIY]

Hope it worked! 🙏

[@melanielazare9]

My friend tried crazy glue and tape masking tape

[@kollieswurve6355]

Hot glue gun works for mind

[@RadioWendy22]

@@JonnyDIY It did! Thank you! Then I got another small leak a week later 😔 And this was a pretty decent mattress! I was so tired though from so much recent trauma that I would just drink a lot of iced tea before bed so I would have to wake up every couple of hours to pee. And blow up the bed. Lol. My aunt shipped me a fab one, Brookstone Queen, the tall one. Now, 2 months later- I'm back to your feed to make sure I'm fixing THIS hole correctly. Ughghgh. FML

[@JonnyDIY]

@@RadioWendy22 sorry to hear you got another leak. I feel you, I slept on one when I was doing renovations on a house for about a year. I made sure be real careful and put a rug under it. Careful not to push right up against wall cause could be carpet tack strip poking up

[@s.o.n.y.p.i.x]

Thank you for this! I got 2 nice inflatable mattresses and I was not ready to toss them, that Classic Patch Fix worked fantastic!! I love that it comes with pre-cut patches in different sizes, I like to use them on movie night in the living room great for my kids, thank you again so much.

[@JonnyDIY]

You're very welcome, happy to hear you were able to fix them and that I could help out 🙌👍

[@CohenSchmidt]

I just went through every comment on this video and you hearted it and replied to them. Props to you man❤

[@JonnyDIY]

@@CohenSchmidt thank you! 🙌 I try and read and respond to all my comments on this channel 👍

[@psychesrevenge]

Like many DIY videos, it was very satisfying to see the process completed with that large black patch. All good, ready to exit to another video. Then, almost too quickly to notice: "Oh, never mind, it didn't work." Classic. ll worked out though lol

[@JonnyDIY]

Haha it happens! Turns out that batch of glue I first used was defective 🤦‍♂️ Got it done though! Patch still holding strong, just used mattress a couple weeks ago 👍

[@caraj1209]

you are the most helpful guy ever, i just subscribed to your channel yesterday on something else and was so glad I just found this one by accident today....... I appreciate all your details and not too jiggly camera work.

[@JonnyDIY]

You're very welcome, happy to help. And thank you for your kind words 🙌👍

[@gladysobrien1055]

Thank you‼‼‼I have cataracts and cannot see those little holes…but with the help of a handyman…We found the Aerobed 🛏air leak on a side seam just above the letter “D” ‼Yes, we started on the sides of the bed…your bubble 🫧🫧🫧soapy water trick is fantastic….I just want to add…once we found the 🫧🫧🫧bubble leak….we distinctly heard a high 🎼pitch whistle, too! So listen for those pesky little holes singing🎶🎶🎶‼ We used a tape patch…waited 45 minutes and put Humpty (redressed the bed with linens)back together with an extra new bamboo mattress topper for cushier comfort softness and protection from my Texas Rescue Chihuahua who has learned to love jumping on the 🛏Aerobed!🛏 Time for a great cup of coffee☕&relax! Gladys🇨🇦Toronto🇨🇦Canada🇨🇦

[@JonnyDIY]

Awesome glad to hear you got it fixed and I could help a little bit 🙌👍

[@gustavocastellon2630]

Welp looks like I need to start watching full videos because I tried the first attempt and ended up on the floor woke up came back to reply and troll realized there was 3 mins of video left and here I am now! Scraping and adding glue hopefully night 2 of camping isn’t as rough!😂

[@JonnyDIY]

Hope you can get it fixed! Soggy air mattress is the worst. Good luck 👍

[@frozenhouse5362]

I have just gotten one step closer to being the smartest man on Earth,Thanks for the video

[@JonnyDIY]

😄 You're welcome, glad I could help 👍

[@jamesupton5709]

Thanks for being honest with needing a second repair.

[@JonnyDIY]

@@jamesupton5709 You're welcome! Happy to share 🙌👍

[@i_am_seawolf]

I used a pvc patch from my inflatable paddle board and gorilla glue… I guess we will see how well that works. Awesome video

[@JonnyDIY]

@@i_am_seawolf Thanks so much. Happy I could help you out. Yes that should work well 👍

[@lorilaubacher2125]

Ok this comment and response is recent. I thought I was originally commenting on a post from 3 yrs ago. So the comment got a little crazy. The fact I only had wood gorilla glue in my possession and didn't feel need to watch this 1st, the replacement air mattress may have to be opened up after all. My confusion also has been regarding curing time, and when the mattress may be used again. ?

[@JonnyDIY]

@@lorilaubacher2125 gorilla glue may work depending on patch material but I won't br surprised if it doesn't stick and peels off. Hopefully works though 🤞 Id give it a couple hours drying time ar least

[@ritamoreno1493]

I did the soapy method and used a self-adherent adhesive bandage wrap with super glue worked so far even for a 5mm tear with the mattress inflated of course you cut a piece that you need to cover hole or tear and put super glue on the section air is coming out then the bandage press down it drys up and bam we are ready to use by the way I used $1 super glue work great.

[@JonnyDIY]

Awesome, glad to hear you were able to fix the leak 👍

[@computerrepairvermont]

I ended up using a nicotine patch and it works great. It also keeps my bed pretty chill

[@JonnyDIY]

Haha that's awesome 😄👍 whatever works right!

[@markbenedict3845]

Your bed didn't need a patched it needed a drag 😂

[@gabbirae7274]

Did it last?

[@george40ish]

I have the exact same air mattress...prepping for camping trip...glad I did, as it is leaking. Now to go and find the hole.

[@JonnyDIY]

Hope you can get it sorted, and have an awesome camping trip 👍

[@mrjonsey5075]

I used Gorilla Glue thick black tape on mine and it’s working fine! After I applied the tape I used a hair dryer to help the tape and air mattress mesh together.

[@JonnyDIY]

Awesome, yeah that tape is great. I got a big old roll of it I use all the time for things 👍

[@clarkmacgowan5114]

I ordered something from Amazon that was specifically for air mattress tear repair. I can't remember the name but all you have to do is look up air mattress patch kit. The only bad thing is you needed to leave it for 48 hours for it to set. I just put a bunch of books on top of it. But it worked beautifully. I use that bed for another 6 months, I was living someplace where I knew I wouldn't be there long and I didn't want to go to the expense and trouble of buying a bed. So I slept on that air mattress for 9 months and that one patch really worked. But the biggest deal was you have to let it set for 48 hrs or it won't take.

[@JonnyDIY]

@@clarkmacgowan5114 Awesome thanks for sharing. Yeah I slept on an air mattress for a year too before when I was moving between houses working on them.

[@darkss8758]

Got this from Walmart thank God it still exists about to fix a small hole thanks so much

[@JonnyDIY]

@@darkss8758 You're very welcome, happy I could help. Hope you can get it fixed 🤞👍

[@dancinbear10]

TY I was looking for this info...first 2 videos I found not too helpful...I can save the bed now!! Blessings

[@JonnyDIY]

You're very welcome, happy I could help you out 👍

[@jacobbanks7795]

Find the hole grab a lighter and something with plastic wrapping. In my case I used my black and milds box covering. Tear a small piece off light the plastic 🔥 blow it out and quickly place it on the hole for atleast 10 seconds with pressure and repeat if necessary. My bed is no longer sinking in. That’s the manly way to do it I believe bc if I gotta go back to the store I’m returning it

[@JonnyDIY]

Thats awesome, thanks for sharing 👍 never tried that way, but sounds similar to like hot glue gun

[@st.sullivan.538]

That's a good tip about spraying on the soapy water. Cheers pal.

[@JonnyDIY]

Happy to help 👍

[@blue_latics2]

Your a life saver thank you 😊😊😊😊 👍 I'll do that again if I get another hole

[@JonnyDIY]

You're welcome, happy to help 👍

[@bobhinton6401]

This video was perfect for fixing my air mattress. My hole was right in the middle of the bottom.

[@JonnyDIY]

Awesome, glad I could help you get it fixed 👍

[@paulhart384]

Hi Jonny, thanks for your help. I have an air mattress with a leak but hell can I find the leak ? I've looked everywhere. Do you have any suggestions please ? Thanks Paul

[@JonnyDIY]

I've always had luck with either listening for it, feeling for the air (sounds funny, but if you put your lips near leak you'll feel it), or the soapy water spray bottle. It's also possible its leaking from the pump mechanism. I've never taken one apart to see if possible to fix that though.

[@AurelienCarnoy]

I love that you included the fail part. It helps too.

[@JonnyDIY]

Thank you! Glad to help 👍

[@ashleychang5318]

Hi! Thanks for the video! I currently own a broken air mattress, its corner had been torn, so there’s a more than 10 inches of hole in the air mattress. Apparently I cannot fix it with patches…Is there any possible way that I can fix it? Or I’ll have to throw it away and replace it? Thank you for your time!

[@JonnyDIY]

Ooo 10 inch hole will be tricky to fix. It's possible with a very large patch, but will be difficult to get to seal I'm thinking. You could try. I would probably just get a new one though or be prepared to at least if doesn't work 👍

[@ashleychang5318]

@@JonnyDIY Appreciate your reply! We managed to tape it with a bunch of duct tape but there’s still some air going out :( We’ll probably just get a new one or keep working on that… Thanks for the advice!

[@JonnyDIY]

@@ashleychang5318 you're welcome, good luck 👍

[@chuckennuggett]

Would my bicycle patch for inner tubes work on air mattress?

[@JonnyDIY]

Yes, thats exactly what I used 👍

[@jamkpa]

Another good idea is to trim/round off the four sharper corner edges of the new patch. If not, these are the points where a patch will usually come apart or peel off.

[@JonnyDIY]

Thanks John, you're right the sharp corners tend to start to curl and peel off. Hopefully this patch holds a few more uses at least 👍

[@JonJonJonJonJon]

I was worried about using a soap solution on these almost cloth feeling mattresses. No issues with cleaning it up after the hole is found? I have done this with pool floats and such but not with anything that feels like these beds.

[@JonnyDIY]

No problem with the soap solution. Its just some sort of felt that's bonded to the vinyl or whatever these things are made of 👍

[@2slofouru]

Use goop sealant, cut a piece of vinyl fabric as the patch. Goop is flexible and strong and the vinyl fabric (pleather) patch will reinforce it. Tire patch rubber cement is not compatible with the vinyl these mattresses are made of.

[@JonnyDIY]

Thanks for sharing will have to give that a try. Have patched many a mattress this way over the years, without issue though

[@citylumberjack8381]

@ 2slofouru: Is there a specific type of goop? I’ve seen the product at Walmart or Home Depot. Sometimes there are multiple versions of a product and I want to make sure I select the correct one? My air mattress is also vinyl but I suppose most of them are?

[@AurelienCarnoy]

Intresting

[@RadioWendy22]

Is it called Goop Sealant??

[@franciscalopez758]

Slept on a leaky air mattress all Christmas Eve night while me and my hubby are sick. It Christmas morning hopefully we’ll be able to get something to patch it.

[@JonnyDIY]

Sorry to hear, hope you can fix today. Merry Christmas 🎄🎅

[@amikuwilab]

Do you know where to find a valve replacement for this kind of air bed?

[@JonnyDIY]

I would think those kind of parts would need to get from specific manufacturer. Or take apart and see if can order same part

[@riccardosforza]

THANK YOUUUUUUUUU!!! I was desperate finding the hole!! 😅

[@JonnyDIY]

You're welcome, glad I could help you out 😁👍

[@curtisharper7566]

what is the hole in the FRONT ? Top of bed does it still work ? Ill let u know when i do it Jonny, THANKS

[@JonnyDIY]

Yes is will work wherever the hole is located. I've had success patching air mattresses all over so no worries. Happy to help 👍 Good luck

[@bad_request5088]

The adhesive your using is meant for vulcanizing rubber. The air mattress is made of PVC. You need to use a PVC sealant. That's likely why the first patch failed and I wouldn't expect the second one to last long term.

[@JonnyDIY]

Thanks will check that glue out. Still holding fine, just used a few weeks ago. First patch turned out to be bad batch of glue.

[@bad_request5088]

@@JonnyDIY fair enough then! Glad it held up for ya!

[@AurelienCarnoy]

Ha ha ha. This video is bringing great comments. Humm. Is it time to do an update?

[@terrabrletic5082]

I have velvet on one side and the rubber on the other side I fixed the other side with this very strong tape that I have and then it ended up when I put the air in it found five holes pin holes on the Velvet and nothing seems to be helping should I put that glue on the Velvet I haven't tried that yet for the tower glue I'm so freaking fed up LOL with this trying to fix this it's so aggravating and it's a big king size one and camping and been laying on the ground in the tent for a day and a half and I'm ready to pull my hair out I can't do anything on this velvet it's so thick please somebody help me so I use the bicycle glue I thought about a hot glue gun but I don't know if you could put that on there and I use the the soapy water you see God if I can find any more holes but I don't see any more holes it's just aggravating find something to stick on his velvet if I could put that glue on the Velvet please let me know I appreciate it so much thank you 😕lol ..

[@acies239]

What's the best patch kit for PVC air mattresses?

[@VideoVenture_1]

You know it will help me learn more 😌 thankfully at least I don't have to tell my dad to help me

[@JonnyDIY]

Happy I could help, good luck fixing 👍

[@bensonabernathy4664]

Dude nice bandanna, I know that's not the focus of the video, but I just really like the bandanna.

[@JonnyDIY]

Thanks! The Dodgers one I got for some kind of in game promotion at a game years ago 😆👍 but it's definitely my favorite one of my collection

[@josh3633]

Great job johnny, it worked like a pro, sleep great!

[@JonnyDIY]

Thanks Josh! 😁👍

[@randydeal5612]

So Jonny DIY the hole in my air mattress is on the top where it has a type of felt like material. I used Duct tape first but the tape didn't stick to the felt. Then I tried Gorilla glue with the tip of a Q tip. That held for a while. Now it's leaking again. I used more Gorilla glue and Q tip but still leaking air. And again the hole is on the top of the mattress. Any suggestions...

[@JonnyDIY]

You can do the same fix as I did here, but be sure to scrape and sand off all the old glue around the hole. And since on the felt you use a lil bit more of the patch glue. Can get a bicycle patch kit at any Walmart, sporting store or bike shop 👍

[@itsjust._nalyn]

Thank you so helpful and save me from buying another one.

[@JonnyDIY]

You're very welcome, happy I could help you out 👍

[@christ9359]

I have a fairly large hole. Any tips for preventing the patch from being glued to the opposite side of the mattress?

[@JonnyDIY]

If big, slip a small piece of tape in hole and press outside of mattress against it. If not too big can lightly glue just the punctured area first, wait to dry then large patch over hole 👍

[@christ9359]

@@JonnyDIY thanks for the quick reply. I appreciate it.

[@JonnyDIY]

@@christ9359 You're welcome, happy to help. Hope you can get it fixed 👍

[@oneseeker2]

I have that same airbag, queen, love it!

[@JonnyDIY]

It's great! I slept on it for a few months when I was working on a vacant house 👍

[@maddiek9]

Thanks!

[@JonnyDIY]

You're very welcome, and thank you for the💲💰 🙌👍

[@milenastrzelecka409]

and how to glue it if the air escapes from the mattress during gluing? Will what is in the video work the same way ???

[@JonnyDIY]

Take all the air out first as I showed in video

[@ValleySun]

Is there a way to patch the felt type material on the top of the bed? My patch kit says it doesn't work on the top, only on the plastic part

[@JonnyDIY]

Yes it should still work, I've patched both areas with success before. I just use more glue on the felt. If small prick put glue over hole then glue patch over whole area as well. Make sure to clamp down as I showed as pressure while drying will be key 👍

[@mollyg8459]

Thanks never thought I would be looking up this video!

[@JonnyDIY]

You're welcome, glad I could help. Hope you get it fixed 👍

[@sherylwood8879]

Wow! This Is Great! Thanks, The Beautiful Kat did It 👀😊

[@JonnyDIY]

You're very welcome, happy I could help you out. Haha I'm always afraid my cat will use corner as scratching post too 😸👍

[@paulhart384]

Hi Jonny, It's me again. Just a thought, when I've repaired my Airbed's I've used Gorilla Epoxy Resin and I've used it three times all were successful. I don't use any patches, just put it straight on. Never fails. I also keep the bed at 90% blown up so the glue isn't stretched so much when hard. As you will know it's part resin and part hardener, mix it together and it bonds like magic. It's even made in America. Also I was wondering re finding the impossible leak: Is there a chance you might check out the pump and whether that could be a source of leakage ? Thanks for your help, Paul

[@professorb3744]

I’ve also heard that leaving the weights on it overnight to cure helps too. Not sure if that’s overkill but just something I heard

[@JonnyDIY]

Yes for sure it'll help, I usually leave for a couple hours at least

[@sheylapagan2670]

Can I use the same thing if it's on the top of the mattress with the fabric

[@JonnyDIY]

Yes, you can use a thicker glue like e6000 with patch too

[@jaycbrand]

thank you, Jonny. Great information and much appreciated!

[@JonnyDIY]

You're welcome! Happy I could help 👍

[@deshawnmisdontukno]

I Love this Video Thank you Made me smile The do over... 😊 ❤❤❤

[@JonnyDIY]

You're welcome, happy I could help and give you a smile too 😁👍

[@0N1X_BR]

Eu também tenho esse mesmo colchão de ar muito bom ele é de ótima qualidade 🔥😎😍🥰 e muito confortável

[@0N1X_BR]

Inclusive ta cheio ate hoje comprei no começo do mes passado entao ja faz um mes que to com ele e ainda mao furou nada ta intacto uso pra dormi em casa tenho a convencional mais amo o meu de ar nao troco por nada 😍🥰

[@suchahermit55]

You actually don't need a patch, tho it might be best. You can use silicone glue. I had some quikweld handy so I used it and it worked fine. So there's options that work. The hardest part is finding the leak

[@JonnyDIY]

@@suchahermit55 Awesome, thanks for sharing 👍

[@lisaxmarie5615]

I used a Lidocaine patch, same steps and it works amazingly 😁😂

[@JonnyDIY]

Lol whatever works! 😆👍

[@jamila9416]

Pls do explain I’m in distress now

[@chikamatthew4064]

Where can I get lidocaine patch please, my bed is leaking 😫

[@JonnyDIY]

@@chikamatthew4064 get a bike tube repair kit, readily available many places 👍

[@chikamatthew4064]

@@JonnyDIY thanks

[@JK-qm1nz]

Love the classic Casio watch!!

[@JonnyDIY]

Thanks J K ⌚ me too, they run forever too! 👍

[@adamcturnbull]

Yeah, the plastic wrap might've kept the patch from drying as well. Thx so much for this. I let my dog on mine !!

[@JonnyDIY]

You're welcome, hope you get it fixed 👍

[@shawnbichotte4038]

Can you use cement glue?

[@JonnyDIY]

Rubber cement, yes. But you want to use the heavy duty one not the one for photographs where you can peel them on and off

[@susanknull7799]

My hole in my mattress is on the top and that is where the mattress has a fuzzy surface. How do I get patch to stick? Sand all fuzz off near hole?

[@JonnyDIY]

Yes that will help to thoroughly scuff. I've patched the tops with success with this method and another using e6000 glue 👍

[@mikegamez77]

What about patching the top and sides where it’s Fibrous material

[@JonnyDIY]

@@mikegamez77 sand it as smooth as you can and can do it as I showed or can use a thicker glue like e6000. Ive used that with success as well 👍

[@mikegamez77]

@@JonnyDIYwill try that. Thank you!

[@JonnyDIY]

@@mikegamez77 you're welcome, glad to help 👍

[@jackflash5659]

Nice tutorial Jonny DIY.

[@JonnyDIY]

Thank you Jack! Hope it was helpful 👍

[@Ellisprincewhite]

I just fixed mine now, thanks for the video

[@JonnyDIY]

Awesome, you're welcome. Happy I could help 🙌👍

[@DaRealMrsRaymond]

What about if the hole is in the seams of the fabric on top of the mattress? Mine has a pinprick hole almost right in the middle

[@JonnyDIY]

This will work there too. Just be sure to thoroughly scuff and clean area before applying glue and patch 👍

[@markbenedict3845]

Actually no use gorilla glue or hot glue sticks and follow instructions on the other videos that work

[@WonderrrBred]

Do you think crazy glue would work ?

[@JonnyDIY]

For a small hole it may work. Worth a try if it's all you have 👍

[@mountiescorner]

Put duct tape over the crazy glue to keep it in place 2 layers Like a “T”

[@SamanthaNickole02]

What about the top of the bed, where it’s flocked? Whatcha got for me there, sparky?

[@JonnyDIY]

@@SamanthaNickole02 sand really well before applying patch. Thick glue works well for it too like e6000

[@JRMAIN]

Can also use 2 sided tape and use 1 side

[@JonnyDIY]

If it works and holds air, that's all that matters 👍

[@DebiQ1830]

What about holes where there is a felt layer?

[@JonnyDIY]

Sand extra well and will need extra glue. I've used thicker glues like e6000 on felt holes with success before

[@DebiQ1830]

@@JonnyDIY Thanks!! I'll let you know how it goes!!

[@JonnyDIY]

@@DebiQ1830 you're welcome, good luck 👍

[@iuaislamf]

omg, i came looking on ytb to find out how do you know how much to blow up an air mattress. i hope this isn’t an omen that i need to learn this too even for my new mattress 😬😩

[@JonnyDIY]

Youll be fine, just be careful of laying it on carpet because sometimes sharp things in it. Check flooring before blowing up. Dont put up against wall with carpet because tack strip can puncture or I lay down thick blanket first 👍 But if you use an air mattress long enough you'll get a hole

[@mysongs6745]

Great video, Jonny. Thanks for posting it.

[@JonnyDIY]

You're welcome, happy to help 👍

[@yettabetta]

Ok but what if you get a hole in the velvet part of the bed?

[@JonnyDIY]

Same procedure, make sure to thoroughly scuff patch area. I've patched a couple holes on that area before and didn't have any issues 👍

[@terrabrletic5082]

That's what I'm looking for the Velvet part I got like six little holes in it for my cats I found the holes but I tried absolutely everything to cover the holes to seal and nothing seems to work and he suggestions please

[@randydeal5612]

Ok so I used Gorilla glue and cotton from the tip of a Q-tip. Held for about 2 weeks. Now leaking air again. I also have cats in house. So it's either a new hole or the glue has cracked and leaking. Any suggestions...

[@_supanova__]

I used duct tape, I was super desperate to quickly fix it but it’s actually working so well! I did a small square of tape over the hole, then a bigger square of tape over that, and then a final piece over that.

[@OsirusIrdia]

did you patch the hole with duct tape when it was inflated or deflated?@@_supanova__

[@jhonsmith5710]

Where you get that bandana?

[@JonnyDIY]

At a Dodgers game years ago, they had a special in game giveaway oddly. Remember having to go down to another level and pick it up in middle of game 😆

[@covenantakinsola1072]

Please what do we do if the leak is from the pump or pump area?

[@JonnyDIY]

Usually if the leak is from the pump you're out of luck and will need a new one. That or take apart the pump assembly, and try and figure whats leaking

[@hashiragamers9321]

Am I the only one waking up looking like a hotdog in the morning😂

[@JonnyDIY]

Been there done that! My back would be a wreck those days! 😄

[@adalbertanieves629]

LLLLLLLLLLLLLOL BROTHER

[@adalbertanieves629]

Wt

[@HelenStone-ey3pl]

A glue that really holds up to literally everything, it's E6000. Last time I checked, it was the 2nd strongest glue avaible

[@JonnyDIY]

Yes that will work too, I've used that before 👍

[@Thesewingsuccesschannel]

But do in very ventalated area. That fumes cause cancer. Read the label

[@Mopar3.6LV6]

Great video. Will this same process work to repair a 4 inch tear? Thx.

[@JonnyDIY]

Yes, for that big of repair I may do a sandwich patch with one patch on the inside glued and dried then one on the outside. Youll probably have better luck creating a seal that way 👍

[@AurelienCarnoy]

@@JonnyDIY a sandwich! Nice

[@slvrangel22]

Need to try this. Over the summer three little girls slept on it... that's where I went wrong. That's three little girls seeing something they can bounce on lol. Now my sisters visiting along with my parents so I guess I better patch it for my sister lol

[@JonnyDIY]

Lol. Good luck, Merry Christmas! 🎄

[@cathgordon836]

Our high end air mattress deflates hourly so my husband re inflates thru out night. IT SOUNDS LIKE AN AIRPLANE TAKING OFF OR A ROCKET LAUNCH. hope this works

[@JonnyDIY]

Hope you two can get it fixed 🙏 that doesn't sound like a good nights rest. Lol they are realllly loud, especially in middle of the night 😄🚀

[@loun9611]

Holes usually on bottom edge from the stretcher tacks at the edge of the door that stretch the wall to wall carpeting.

[@JonnyDIY]

Yes exactly!

[@ginorizzo1310]

How do you fix the edge

[@USbachelor]

I had the same bed but hole was on top and was 1/4 inch slice how to you fix a bigger hole on top

[@JonnyDIY]

You can fix it the same way I show here with bigger patch 👍

[@USbachelor]

@@JonnyDIY i tried and the volor wouldnt holed it.

[@JonnyDIY]

@@USbachelor sand down surface really well and try again if doesn't work again, try a thicker glue like e6000 with patch 👍

[@richardwrenn3175]

Thanks Bro you really helped alot

[@JonnyDIY]

You're welcome, glad I could help you out 👍

[@VIGILANTE_Eraser45semi]

The worst leak to fix is definitely in the seams (the space in between the parts that rise up on top). That was fixed temporarily with gorilla tape, less is MORE! You don't need a ton of tape. I say it's the worst because it's different to patch a seam when it's not flat while inflated

[@JonnyDIY]

@@VIGILANTE_Eraser45semi yes you're right, seams and around the pump are tricky. Keep an eye out for more leaks. I've had them where the seams just start failing all over

[@jckdnls9292]

I missed you Joe Dirt !!!

[@JonnyDIY]

Keep on keepin' on 👍

[@sashafortin1695]

I got up at 3:30am (it's now 6:14am) because of my deflated basically to the floor airbed! Now, I dont know where the leak(s) could be coming from, as I've got a toy breed puppy who scratches at it to get my attention because he can't jump up on his own(he tries to though!) I'm going to check around as soon as it's appropriate. HOWEVER, I do not have any of the materials to repair it😫anything else around the house that could be used?

[@JonnyDIY]

Ohh dang sorry to hear about rough nite. Hmm some have mentioned they used hot glue on holes with success. Will need glue of some sort. You could try duct tape but not sure if that will hold. I would put blankets or towels hanging over edge where dog scratches too 👍

[@sivanesanerambu753]

Good work

[@JonnyDIY]

Thank you! 🙌👍

[@GiovanniGineri97]

Thank You 🙏🏼 !!

[@JonnyDIY]

You're welcome, glad to help 👍

[@judepatterson3708]

Thanks mate!!!

[@JonnyDIY]

You're welcome! Happy I could help 👍

[@AkudoPeace-qm6hs]

Good it's understandable thanks

[@JonnyDIY]

You're welcome, happy to help 👍

[@ruthybermudez16]

Duck tape works well, also…I did it to mine 🙂

[@JonnyDIY]

Thanks for sharing. As long as it holds air, good to me 👍

[@throttlebeholder]

What if its on the suede part?

[@JonnyDIY]

It will work just the same, just be sure to thoroughly sand and clean area. Sometimes need use thicker glue like e6000 if patch won't stay on 👍

[@jona8279]

Thanks boss

[@JonnyDIY]

You're welcome, glad to help 👍

[@joecornejo944]

Thanks bro

[@JonnyDIY]

@@joecornejo944 You're welcome! 👍