Excellent information, well spoken and demonstrated. Very much appreciated!
@840diego5 Жыл бұрын
Im 19 yrs young and I wish i could work along side a passionate professional like you man. The jokers i work with are supposedly supposed to teach me how its done PROPERLY but all they do is teach me how to cut corners and that’s just not me. At least i have these videos to learn from someone like you so one day i can surpass them and with the years become a passionate professional too ! Thank you for all your helpful videos Leo !!! God bless 🙏🏼
@manwithapan Жыл бұрын
When do you want to come to work?
@840diego5 Жыл бұрын
@@manwithapan i live in Houston could i still work with you ?
@manwithapan Жыл бұрын
@@840diego5 if you feel like coming to Pennsylvania
@840diego5 Жыл бұрын
@@manwithapan i know for my career it would definitely be worth it. But my son was just born January 2nd and i barely spend time with my family as it because of work and to me this time is more valuable than any money i will ever make in my life. I really appreciate your welcoming Leo i guess i will have to figure it out on my own thru experience and continuing to watch your videos ! Thank you for sharing your knowledge with us FOR FREE, you make it easier! God bless you and your family Leo.🙏🏼
@raymondmahadeo5762 ай бұрын
Leo you Remind me of my Irish boss Jerry from New York taught me to hand tape 20 yrs ago very meticulous guy worked very clean also.Up and close with the bazooka is the way to go. Nice work.
@bradscates9064 Жыл бұрын
It is but it’s just an extra step I do because I can’t stand that grove in the middle of my tape. I love fibafuse on my flats but when i used it I still ran paper on my butts. The fibafuse would tear some if I used in the butts when I busted them out with the box. It’s just got so expensive I’ve went back to paper everywhere
@manwithapan Жыл бұрын
I could totally see it tearing on butt joints. I always prefill butts. A lot of times if hangers are clean the make the so tight mud can’t get through them and only bonds to paper. I put a little v in them when prepping the house. It does help lay tape or fibafuse flatter.
@Tigerratcat2 жыл бұрын
Some of best drywall videos. Thanks for explaining so clearly. Would you ever run Fibafuse through a bazooka?
@manwithapan2 жыл бұрын
I ran an entire house with fiba fuse. All flats and butts, have to run paper on angles. Advantage to fiba is it does not pull at all when your taping and no stretch like tape. Disadvantage is that you have to be in long sleeves and need gloves because the fibers get into your skin and you itch all day. It does run smoother through a tube.
@Tigerratcat2 жыл бұрын
@@manwithapan Thx. That makes perfect sense. There’s also Fibafuse Max that I think can be run in corners too
@manwithapan2 жыл бұрын
When I ran it, it was 7 years ago. They didn’t have the max out yet.
@manwithapan2 жыл бұрын
One thing to be careful about is tearing it with your knife, if you wipe to hard.
@geordie-drywall2 жыл бұрын
Was going to ask this myself thanks guys. Why do you choose to run paper over FIBA mate , just keeping costs down or any other reasons ? Used steel angles since day one on internals but all you guys really making me want to go to paper 😬
@dereckthompson15722 жыл бұрын
Great content!
@manwithapan2 жыл бұрын
Thanks man! I’m trying to help people! The more this channel grows maybe the builders will see the difference of high quality job and cheap get it done as fast as possible job.
@dereckthompson15722 жыл бұрын
@@manwithapan absolutely!
@DCtaping Жыл бұрын
That bazooka it bad ass can you get parts easily tho thats why i run Columbia because in Canada i can get parts
@manwithapan Жыл бұрын
I deal with the guys over at East Coast drywall. Derrick Trout runs it. I had a pin break on it a month ago. It cost me $3.00 plus shipping and it was working 2 days later.
@DCtaping Жыл бұрын
Right on east coast drywall in new York they should be able to ship to Niagara falls Canada? You're not that far after all 👍😎
@manwithapan Жыл бұрын
facebook.com/EastCoastDywallTools?mibextid=LQQJ4d
@chadchavez4991 Жыл бұрын
I want to learn. I’m an apprentice finisher laid off . Where are you located
@manwithapan11 ай бұрын
Northeast PA
@bradscates9064 Жыл бұрын
Y not prefill so you don’t get those gaps and lines in your flats?
@manwithapan Жыл бұрын
So believe it or not. The house is prefilled. But I don’t prefill where the flats are tight together, only broken board and gaps. The line in the tape has been happening only recently over last 4 months. I was using USG tape on this one which seems to have gotten thinner. It stretched a lot wiping it down on that house. I would run some long flats and it would stretch almost an inch by the time I was done wiping it down. I am going to try ProForm tape on next one I tape with a tube. It has a thicker profile.
@jeffwindover991610 ай бұрын
I do all prefill to butt joints and corner gaps along with damaged board with sheetrock prior to taping as it is required to get a high quality finish and 2 other things you failed to mention 1 being that where you end at adjacent wall/ cieling flats if you touch filler valve to drywall and do cut length is perfect every time no quess work involved and 2 being that the screen on bottom of pump can get plugged by chunks of debris either dry mud or semi dry mud and restrict mud when pumped into bazoka and cause air bubbles , all butts that are not prefilled will show a line in the long run btw , my 41 yrs exp knows these facts to be true
@manwithapan10 ай бұрын
Very good. But I was just doing the basics. It takes years to learn what you know. People can use the videos to get started. Along the way they will learn to be masters. Good comment Jeff!
@bradscates9064 Жыл бұрын
I was having the same issue so I just started prefilling all my flats and butts, it seems to help my tape lay flat
@manwithapan Жыл бұрын
I can totally see how that would work, but that’s like taping the whole house twice almost on the flats and butts. I did tape one house one time with fiba fuse on all flats and butts. I didn’t have this issue at all.
@liverpoolliverpool66888 ай бұрын
You're pulling way too hard on that knife you pulling back out all the compound mud from under the tape that suppose to help hold the drywall joints together
@hawkeyedrywall88872 жыл бұрын
U probably need me to help u? I shared ...
@fbad32 жыл бұрын
Leo, any idea on the square footage of that house? 4000? Looks like a beast. Just curious. Thanks for posting.
@manwithapan2 жыл бұрын
This one is 6k sq ft. Has a bit over 21k ft of drywall.
@manwithapan2 жыл бұрын
150 no coat, 50+ sticks of beads. Rooms, 11’ tall, 11’6”, 9ft, 10ft, 3 barn ceilings, 19 ft high room, 11 ft garage. All sorts of different heights.
@fbad32 жыл бұрын
@@manwithapan Appreciate the response. Yep, that's a big house for sure. Bet it will look amazing when you're done. Can't wait for the next videos in the series!