How To Fit Your YZF-R125 Fairing Kit

[@Sloal]

Best guide on KZbin for fitting fairings. Thanks.

[@MotorcyclePartsWarehouse]

You're welcome! Glad it was helpful!

[@NOREMAC2300]

So glad I’ve found this video I’ve got a first gen 2011 model and I’ve been trying to figure out how to put it back together since I’m about to repaint as all the panels were cracked and scuffed so thank you

[@MotorcyclePartsWarehouse]

you're welcome - we are glad you found it helpful!

[@sOnIc53ful]

Definitely gonna use this video to help me with mine!

[@MotorcyclePartsWarehouse]

Nice! Let us know how you get on

[@MrStyve]

Could you possibly put the link for the bolt kit? Would be great!

[@robertbridge9723]

did you find out what bolts you needed?

[@sirterry2444]

By the way you missed the part where the front of the indicator panel attaches to a bracket underneath the headlights. Use a chimney nut and self tapping screw to secure these points in place.

[@loganmoriarty2834]

Would help if the actual mudguard bracket kit existed I just got my kit and it won't fully go on because yous don't supply the bracket kit

[@MotorcyclePartsWarehouse]

This is valid feedback, thanks. We do have a fitting kit in the pipeline. From memory, some M6x15 bolts and nyloc nuts are best for the mudguard bracket. You can use rivets like the OEM but that makes swapping in future more of a hassle.

[@chrismcginty3687]

Hi could you sort me some photo of how wiring goes at front please like near yolk.ect and on sides im.rebuilding 1 and stuck with how wires look . Also i be looking at getting the matt black kit in next 3 weeks

[@muhammadhamzamalik1425]

do you guys still sell the mudguard kit as i can’t find it

[@MotorcyclePartsWarehouse]

I'm afraid it seems to be discontinued - we'll give you a heads up if there is a restock!

[@tristanpflaging8237]

Hey, what is the name of the part shown at 3:37 with the yamaha Logo on it? I really need this one :D

[@IAmSwordless-]

does this kit come with all screws? also do i need that mud gaurd metal plate to use this?

[@MotorcyclePartsWarehouse]

Hello - the kit does not come with screws or the metal plate from the mudguard. It is possible to reuse the plate from the original mudguard if you drill out the rivets. We replaced the rivets with bolts to make it easier to swap out. At one point there was a bolt kit in the pipeline...perhaps at some point in the future hopefully.

[@miless3868]

Is this the same for a 2013 model ?

[@MotorcyclePartsWarehouse]

Yes - 2008-2013 have the same panels. Slight update in styling between 2014-2018 but that is essentially the same too

[@Benboardman3]

Do you have a video on how to strip it down before the fitting

[@MotorcyclePartsWarehouse]

We don't, but it is in the works!

[@walker_yzf.r125]

Hola buenas, llevo buscando este vídeo meses, ahora que encontré este vídeo podré restaurar mi carenado pero lo único que me detiene es no disponer de todos los tornillos y placas de metal para sujetar los carenados, hay alguna manera de que me puedan mandar todos los tornillos y placas metálicas para restaurar mi carenado? Gracias

[@MotorcyclePartsWarehouse]

Gracias por tu comentario. Me temo que actualmente no vendemos un kit de tornillos para el carenado YZF; Este es un producto que ha estado en proceso durante mucho tiempo y nunca se finalizó. Con suerte, traeremos un kit que pueda reemplazar los sujetadores OEM, pero por ahora me temo que no lo tenemos en stock.

[@phimorahadu-sarpong4571]

Please where do I buy the fairing kit and the bolts and nuts from I’m in Ghana and we don’t have a Yamaha shop here

[@charliemcdowell9113]

How do you install the bolt that holds the fule tank in place

[@Yzf_zy]

Hi! I have YZF R125 2017 And i bought the upper cockpit for the YZF R125 2014- 2016 Will it fit on my bike? I never fount any for the year 2017

[@MotorcyclePartsWarehouse]

Hello - the second generation YZF runs from 2014-2018, so you should be good with the one you bought! Any parts for 2014-2016 will fit the 2017 and 2018 bikes as well - hope that helps

[@Yzf_zy]

@@MotorcyclePartsWarehouse much appreciated 🤝

[@sirterry2444]

Do the black fairings still come unpainted on the interior sides? Like what I saw with the boomerang panels.

[@MotorcyclePartsWarehouse]

yes they do - all the infill panels are moulded in black ABS, but all of the painted panels are unfinished on the reverse

[@sirterry2444]

@@MotorcyclePartsWarehouse Thats a really shame. Looks like I'll have to paint the interior myself. Do you know the exact colour code that is used for the fairings exterior?

[@MotorcyclePartsWarehouse]

@@sirterry2444 yes I know! We'll speak to the manufacturer and see if there is anything we can do, but that'd be a long term project. The colour code tends to change batch to batch - I've just had a look at our bike and it isn't really that noticeable once fitted. If it really bothers you the boomerang panels seem to be the only ones which are visibly unpainted on the back.

[@sirterry2444]

@@MotorcyclePartsWarehouse Gotcha. Thanks very much.

[@veyseld90]

How do you fix the fog lights with the front mask and the side mask which comes over to the front?

[@1trxps]

where can I get the cover for the back seat?

[@MotorcyclePartsWarehouse]

motorcyclepartswarehouse.co.uk/catalogsearch/result/?cat=&q=MPW-R125-SSC - here's a couple of options for you

[@1trxps]

@@MotorcyclePartsWarehouse thank you, do you also ship to germany?

[@MotorcyclePartsWarehouse]

@@1trxps yes we do ship to Germany - if you select Germany and your state when you're in the shopping cart, it will show you the shipping costs

[@oboumami6186]

omg! how old is this bike? first generation!?

[@MotorcyclePartsWarehouse]

Hi Obo. This bike is a 2008 model, though as a shop bike it's seen some hard times!

[@Krushurpants]

is it possible to fit the 2020 kit on this model?

[@shabulsaem5094]

yes, you can. i have a 2008 faring kit on my 2018 mode

[@MrStyve]

nope

[@djxxxvxxk]

@@shabulsaem5094 no, why would you even say this?

[@martinyzfr]

@@shabulsaem5094 2020 and 2018 are completely different models

[@willmason6595]

Does it come with all the nuts and bolts ?

[@grant5377]

Hi Will - the kit doesn't come with nuts and bolts - we are working on putting a bolt kit together though...

[@dazpike3472]

What size bolts were used for this ?

[@MotorcyclePartsWarehouse]

There are a range of sizes required, depending on where the fairing is fixed. We potentially have a fixing kit in the pipeline...you can re-use the original bolts for your fairing (if you have them) or some people also sell generic fairing bolt sets. We'll update you when/if the fitting kit is listed!

[@dazpike3472]

@@MotorcyclePartsWarehouse any idea of size of the self tappers used

[@MotorcyclePartsWarehouse]

@@dazpike3472 I believe they are M6...from memory there are also a few different lengths depending on whether it is for the fuel tank cover or infill panels. Hopefully we will have our fittings kit sorted within the next decade or two!

[@dazpike3472]

@@MotorcyclePartsWarehouse thanks alot !

[@noinusgaming]

Does not show you have to fit the indicator panel under the Headlights as they do not simply clip together?

[@nbandit2k9]

what year is your bike?

[@thomasrobinson2466]

What size chimney nut are you using please

[@grant5377]

You've probably figured this out by now! I believe they are M6 chimney nuts for the side fairings, if I remember rightly. Should need 14 in total.

[@sirterry2444]

I really hate to be negative but this fairing kits didn't come with pop rivets which are absolutely needed for the front mudguard, specifically when it comes to fixing the metal plates and brackets used for bolting it to the front forks and securing the brakes and speedo cables too. Since there's literally no information about it on google (trust me I've checked) I got no choice but to buy loads of metal pop rivets until I find the right ones. If you guys know the size of the rivets used originally in the front mudguard please reply this is crucial missing information.

[@MotorcyclePartsWarehouse]

Hello - not negative at all SirTerry! What we did was replace the rivets with M6x12mm button head allen bolts and nyloc nuts. It makes replacing mudguards a lot less hassle in future. We used the same bolts for the brackets to attach to the forks and they work perfectly. We haven't tried using blind rivets on our bike, so I'm afraid we don't have information on which to use, but I'm hoping the bolt dimensions will give you something to go on. Let us know if you have any other questions.

[@sirterry2444]

@@MotorcyclePartsWarehouse I used these materials and now feel so silly for not doing so in the first place. Absolutely perfect thank you so much. Now I'm gonna go ride for a long time, cold weather be dammed.

[@MotorcyclePartsWarehouse]

@@sirterry2444 that's what we like to hear! Enjoy!

[@MotorcyclePartsWarehouse]

Make sure to Subscribe to our channel! More how-to's and reviews are just a click away! #subscribe #gompw

[@nanangpurwanto276]

Wow, 👍