TheJ20jeepster replacing the exhaust tube and motor mount on 26 gal. Husky air compressor because it wont build pressure. WL660900AJ
Пікірлер: 112
@shirleydiazhurtado9864 Жыл бұрын
Construction seemed sturdier than other units I considered
@joela.rodriguez38022 жыл бұрын
This does exactly what I was wanting
@wakegames4 жыл бұрын
Thank you for posting this video! Was only getting up to 44 psi and about to go spend $300 on a new one. Only spent $19 to fix my Campbell Hausfeld 26 gallon. New part was $17 and I used a $2 angled L bracket from Lowes and attached to the broken bracket. Working good as new! Thanks for saving me money, trash from the landfill, and large companies from profiting from poor designs. Flex line would be the best option.
@tylieu34397 жыл бұрын
For awhile my compressor was filling up to 90 psi. Now it only goes up to about 25 psi. Now I know what to check for when I take it apart this weekend. Thank you for making the video.
@paulkobres55696 жыл бұрын
A friend had the same recurring problem with an Ingersoll Rand. We solved the issue by using our own copper tubing and leaving a coil of tubing in the line to absorb vibrations.
@julz92725 жыл бұрын
I have a red 22 Gallon 5hp version of you air compressor. Changed the tube n it fixed it thanks to your vid
@bryan22876 жыл бұрын
Thanks for the insight. Fixed me right up. Stay Blessed
@ArnoldsDesign Жыл бұрын
Thanks for the video. I'm helping a buddy fix his. The copper tube is split lengthwise on both sides after 20 years of occasional use.
@adammathis87847 жыл бұрын
Thank you for the video. I inherited a similar sized Husky. Previous owner said it wouldn't build pressure. I'll check this week for cracks. I did change out the drain valve. So that's holding what pressure it does build (20-30psi).
@Dansk554 жыл бұрын
EXHAUST TUBE!! I have been looking for that same thing online and couldn't find it anywhere. Now I know what to shop for. Thanks man. Mine was cracked
@samzch8
Great video! Helped me find the same issues on my compressor! Thank you!
@Juanca222218 жыл бұрын
Thanks a lot for your video, it helped me a lot to fix my compressor.
@dannystout34116 жыл бұрын
How do I get the cover of the Husky 17 gallon air compressor
@lifewithsindi40957 жыл бұрын
do u kn wher I can get motor for this same air comperssor
@MarvinResper Жыл бұрын
Thanks for that information I replace mine with copper three years ago
@benfreed3 жыл бұрын
That rocked, thank for posting.
@hellcattraceround3 жыл бұрын
Thanks for Vid - the plastic tube to the pressure switch was my problem.
@3dvisiongamer2136 жыл бұрын
Hey bud, simple question, what do you do to maintain the best performance of it? Does it need a lubricant on the piston or need the poston's plunger to be replaced? Bkught an old one that works but maybe a little slow. Thanks bud!
@1hicksonfamilybcle14 жыл бұрын
Thanks so much for the video. Great job on the bracket!! Where do I go for the part, or is it an Amazon thing?