How To Fix A Hardwood Weather Bar To Your Door / Rain Deflector To Existing Door

How To Fix A Hardwood Weather Bar To Your Door / Rain Deflector To Existing Door

[@anncaty30]

Thank you so much for sharing! This is exactly what I've trying to explain to my carpenter to install yet he keep l installing the wrong thing!!!

[@PaintingandDecorating]

You're welcome thanks 👍

[@c.p3425]

The correct way is to fit the bar almost the full width of the door, then cut the frame to accommodate, with a bull nose on the opening end of the bar to allow the door to close.

[@jochippyy]

Agreed I was under the impression you have to let the bar into the frame a bit to stop rain getting in round the ends of the bar

[@peterjones6733]

Thanks mate. Never thought of screwing it rom the back, DOH. Neat!

[@PaintingandDecorating]

Thanks

[@paulwhitting4953]

Nice to see the weatherboard fitted correctly. It weathers so much better that way & no filler to fallout over time. Nice job. 👍👍

[@PaintingandDecorating]

Thank you.. Yes have seen too many done from the front and they start to rot from the near the holes and filler.

[@toria-j]

I've just stripped and painted one with holes on the outside - there wasn't even any filler in the holes. I was wondering if the holes should've been on the other side too. That looks so much smarter.

[@ascno1970]

Master of many other trades, not just a painter/decorator 🙌🔨

[@PaintingandDecorating]

Thanks.. I think this eventually happens to decorators... no one else to fix before you paint at short notice and small jobs.

[@ttsstt1000]

Iv just completed a conservatory rebuild and paint I used car body filler as it comes in 3.5 litre pack for about 28 quid you can pick one up at euro parts of your interested as you will use a lot it's grey but takes paint well and easy sand easy mix as hardener is pink regards sl

[@peterwilliams6555]

Thanks, very helpful.

[@PaintingandDecorating]

Your welcome

[@erickaarredondo3158]

Nice job!

[@PaintingandDecorating]

Thanks

[@Napoleon-Blownapart]

Another tidy job 👌

[@PaintingandDecorating]

Thank you.

[@jasonrich4664]

Any videos on how to makes the actual weather bar from scratch? Good vid also 👌

[@jezza42]

Great video, thanks for sharing. How did you remove the existing threshold please?

[@PaintingandDecorating]

It's a case of finding the screws and seeing if you can unscrew them. Usually come off easy if they need replacing. You may have to cut round the sealant to help remove it. Sharp scrapper and a hammer can help also. Thanks

[@jezza42]

@@PaintingandDecorating I meant how did you remove the brass threshold bar?

[@ratchriat1716]

is that original door you made the job easy and simple enjoyed the video

[@PaintingandDecorating]

Thanks

[@mickyruddy6974]

Tidy job ! 👍

[@PaintingandDecorating]

Thanks

[@shoney70]

Good job! 👍🏼

[@PaintingandDecorating]

Thank you.

[@toria-j]

Did you say you used foam to fill the hole between the sill and the floor please? I just fitted a new sill, and foamed the gap left, but put a layer of caulk over the top to protect the foam. I have a similar threshold to fit on top today, then Sikaflex to seal the edges. I am only hoping it all works.

[@farmergoggin2102]

Thats a lovely old step dont see to many like that any more. I do likr sandtex paint think its good stuff. What do you prefer dulux or sandtex?

[@PaintingandDecorating]

Yes it's a nice house... Dulux and Sandtex are both really good paint... both last just as well... but I find Dulux has better opacity.

[@2010gtoner]

Great vid again mucker :)

[@PaintingandDecorating]

Thanks mate.

[@elizabethowens4522]

do you have a video - on how do fix a weather bar to a PVC door? or is it just the same? I am new to this DIY stuff -sorry if obvious question. my backdoor in the garage is letting water in at the bottom of the door. thanks, Lizzy

[@PaintingandDecorating]

Sorry no you will find instructions with your new weather bar... thanks

[@yuvacyberworld7529]

Good

[@PaintingandDecorating]

Thank you.

[@neilrafferty2097]

Now for the frame !

[@karens138]

Do you need to leave an inch gap of door around the weatherbar?

[@gzbg21]

😂😂😂 That's for expansion.. 😆

[@markhoward5780]

Hi , love your videos learning a lot , would you mind recommending a wood satin paint , I have read many reviews but cant see the wood for the trees , sorry if its of topic . howy

[@PaintingandDecorating]

Thanks Dulux do great satinwood paint oil and water based

[@totoaz5292]

can i use the deflector for the wooden windows in my house

[@PaintingandDecorating]

Yes

[@abcxyz-kc7ch]

Do you have to remove the door? I want to attach the to a couple of gates. Was thinking of using glue. Would be too much effort for someone to do solo.

[@PaintingandDecorating]

Why would you fit one to your gate?

[@abcxyz-kc7ch]

@@PaintingandDecorating because they are solid doors and the bottoms are getting wet and rotten. They are brick built out buildings.

[@markhoward5780]

Sorry , interior white , 4 year old house , already satin finish , thanks .

[@PaintingandDecorating]

Dulux satinwood oil is the best. thanks

[@paulwhitting4953]

That’s some serious wear on the step, how old is the house? 🤔

[@PaintingandDecorating]

Sorry for late reply was making sure we got the correct year which is 1911

[@paulwhitting4953]

Thanks 😃😃👍👍

[@BillsAllotmentDiary]

Where did you get that threshold plate from? I've been after one for a while.

[@PaintingandDecorating]

Sorry for late reply got this from B&Q.. thanks

[@BillsAllotmentDiary]

@@PaintingandDecorating cheers for the reply. Finally took the plunge and started taking on painting and decorating jobs. Just small jobs ATM. I'm hoping you can advice me on pricing jobs I know it's a bit of a liberty but I've been out the game that long I am struggling on pricing. At the moment I'm working part time as well as doing the painting and decorating and so I'm charging double my hourly rate at the part time job but would appreciate your guidance as one old school p&d to another. I'm on FB btw as bill Hayes Decorating Services if you want to check out what I've been doing and advise me feel free to say hi. Would be much appreciated. Bill

[@PaintingandDecorating]

@@BillsAllotmentDiary Hi Bill... pricing is the most difficult thing to do... and no easy answer.. you could have two painters and give them a priced job. one could turn up early and leave late finishing the job twice as fast as the other who turns up late disorganised and leaves early. You need to know how fast you can paint certain things done correctly. Then when you quantify a job you have a good idea how long it will take... better putting a price in because hour rate puts people off.... one price unless unforeseen circumstances that are not your fault on the price... practise makes perfect..

[@BillsAllotmentDiary]

@@PaintingandDecorating I hear what your saying. At the moment i'm saying if a job takes me a full day, in my part time job id get this amount so I base it on that then double it. but if the going price for say papering a wall is more then I'm under quoting but then I may be over quoting. I've just done a porch and bay window it had rot which i've sorted with two part filler sanded prepped and 3 coats of stain. The customer paid for all the stuff so i charged £60 but I don't mind on this job as its for a neighbor who's short on cash and its giving me the experience so win win however going forwards that wont pay the bills. Luckily the mortgage is paid lol

[@PaintingandDecorating]

@@BillsAllotmentDiary That's okay as a favour again for customers give them a price at the start including materials and get trade discount. Only leave colours with your customer and charge only for the amount of paint used for anything else i.e. whites also painters rates are different from painter to painter and in different areas. It's about being priced reasonable my customer gets the paint discount a lot of the time. Keeping the jobs coming in is about word of mouth and that comes down to your skill level.. how good you can make a room look.

[@solankijd5329]

Where can i get this??