Just used your video to fix my Blanco culina tap, you are a life saver, thanks for making it clear.
@alracm210 ай бұрын
Brilliant! Thanks for sharing. Just moved into a new house with this exact tap and it's been giving us issues. Your video was really helpful 😊
@nuralamrahman6630 Жыл бұрын
Thank you. Needed to replace the cartridge on an IKEA glittran mixer tap, another video showed how to access the cartridge and this was very helpful in showing how to take the cartridge out replace it.
@Zed_Zone11 ай бұрын
Thank you very very much ...we have had a leak at that spot and I didn't know how to replace the cartridge (didn't even know it was called a cartridge). Thanks again guys
@HammerRocks3 жыл бұрын
Excellent work. My new home has this gooseneck style mixer tap in the kitchen sink and I've never had to replace the cartridge in these style of taps before. Thus didn't know how to pull one apart to get to the cartridge. I didn't even know they're called cartridges in these new taps. As I've only ever replaced tap washers on the traditional hot/cold taps. This video has given me the info I need where to start. Thanks for sharing.
@briantomkins91854 жыл бұрын
Well done mate, it all made sense when you showed where the grub screw was hidden.
@Aesir55 ай бұрын
Yes super helpful
@joeldstirling Жыл бұрын
Thank you. Would never had been able to do that without your help :-)
@janetp21753 жыл бұрын
I never comment on KZbin but I had to say thanks for the informative video! Very helpful! J
@ebutuoy4512 жыл бұрын
Mate, you saved my bacon. She’s happy again!
@lovehatebs63202 жыл бұрын
Thanks mate, love that you saw something missing and gave back to the community by making this. Top bloke. I’ve got one with separate hot and cold taps. Is it the same idea, just need to isolate which one is causing the drip and then replace just that?
@CHECKHIMOUT Жыл бұрын
I just watched your video and did exactly what you did . Now the water pressure is at a trickle. Any ideas on how to get the pressure back to how it should be. Both cold and hot are producing the same pressure
@CHECKHIMOUT Жыл бұрын
I finally figured it out! I must of loosened some build up and it was lodged in the aerator.
@bazajow2 жыл бұрын
This is the only video that shows that the handle needs to be unscrewed first to reveal the grub screw. Similar tap but Franke Fuji that I have and no where it shows this although underneath there is the usual small hole but no hexagon key turns anything. Having many fruitless moments I will try it tomorrow. Many thanks.
@silverfox_943 жыл бұрын
No more leaks - Thanks from the UK👍
@Guatsyoutube4 жыл бұрын
Thank you from Canada
@mikeroberts8412 Жыл бұрын
Thanks for uploading, very helpful
@vapp705 жыл бұрын
thnx mate simple easy to follow video
@4txx Жыл бұрын
Handel on my faucet is solid as a rock. I tried everything to unscrew it.
@jaapgerritsen84 Жыл бұрын
Got the same problem. Already fixed it?
@4txx Жыл бұрын
@jaapgerritsen84 I managed to unscrew it in a rather amusing way. I used strong tape to wrap around the handle several times while also inserting wooden toothpicks in between layers. These toothpicks provided a grip point for the adjustable spanner. Zero scratches.
@JasonBarrett2192 жыл бұрын
you superstar... was looking for a screw on the bottom and was just about to get the plumber in.
@SlademanxxАй бұрын
Where was the fixing, you only replaced it.
@VideoWatcher88883 ай бұрын
10/10 I have the exact same tap.
@rosstisbury16265 ай бұрын
Very helpful thanks 😊
@mikeleask38584 жыл бұрын
Excellent video. Very helpful! Nothing on KZbin for side mounted mixers. However mine (Oliveri) still leaks after replacing cartridge. Any ideas?
@bingilee24883 жыл бұрын
Did you ever get fix your leak?
@gsfdriller2 жыл бұрын
Tighten down the big hex a little more.
@barneyrooney71268 жыл бұрын
Good oe Ausi - Sorted! Thanks Barney UK
@snuffle22693 жыл бұрын
I should have watched this first. I had a constant drip on the cold side side so I took my Armal apart and discovered a small piece of rusted screen stuck in the cold side. The individual, small o-rings adjacent to the 2 locating stubs were flat so I bought the 35mm replacement control (non-factory). It didn't seem to fit so I went back to the hardware store and they said you need the gasket kit which doesn't fit on the original mixing valve. So I reinstalled the old and it seals well. So in this video I see that no gaskets are involved. I have the spare mixer and gaskets. I could have saved about 10 Euros. We have good water so the original might last well beyond me. THE ORIGINAL CLOGGING SCREEN CAME FROM THE WATER METER CHANGE BY THE CITY.
@ahsanullah27612 жыл бұрын
Very helpful thanks
@simonrboothphotographer22177 жыл бұрын
Helped me sort this thank you :-)
@jaxtrax615210 ай бұрын
Cheers 👍😎👍
@SeniorBandar Жыл бұрын
Tech talking to him self, action hidden under his hands. Never know when was fault, what corrective action he has taken no idea.
@MartinTurnerBassist7 жыл бұрын
So undoing it and putting it back together 'fixes' it? No mention of a new cartridge or new seals......
@olegau127 жыл бұрын
I would never call a such plumber
@TheCJN7024 жыл бұрын
Martin, if you had "LISTENED" to his commentary.... you'd have heard him say he'd already replaced the cartridge earlier and was just (kindly) showing us how that is done. You may apologise 😏
@MartinTurnerBassist3 жыл бұрын
@@TheCJN702 you are right!! Apparently a picture isn't worth a thousand words. Dear All you 'watch' this video.... please listen too, otherwise you will never know that he had already fixed it, and now was doing it all over again to show us how he had done it.......
@andrewmuir28014 жыл бұрын
Legend thanks
@clemmcguinness10874 жыл бұрын
Thank you Sir
@rajdeep3080 Жыл бұрын
Thanks u
@vijaydesai95975 жыл бұрын
You did nothing to stop the leak. This demonstration only shows how to assemble it.
@MartinTurnerBassist3 жыл бұрын
Watch out - Clare Clare will tell you that you should have "Listened" (as she replied to me earlier)