How to fix a puncture on an inflatable kayak - Using Stormsure Flexible Repair Adhesive

[@kelplicker76]

Been using this stuff for over ten years. Brilliant stuff, you don't need a repair patch with it either.👍

[@70diezel]

Justin, thanks for the video. I ordered on Amazon and did exactly and tried my kayak the following day and was perfect. It work really well

[@JBTV]

Fantastic, good stuff it is!

[@inakalimba9428]

Just picked up the JB Weld &taking it back to the store unused, after you showed us the problems that product produced. Thanks for sharing ! ! !

[@davidwatson7611]

Hi, I have exact same kayak and just found your video. Many thanks for making it, I will also get this glue and hope it does the trick.

[@martinjolly]

Brill vid mate cheers, I have the exact same kayak and have just put a small tear in the bottom of it.Only just noticed the patch repair kit they send dosnt come with any glue so this has been extra helpful, Thanks again for taking the time to post :)

[@clivewilkinson5394]

Have you tried the storm sure tape and patches. They too work amazingly well.

[@donotrobme9295]

Thank u!!! Hopefully I won’t need too but I watched cuz when I need it I’ll be out of cell Service. Going to buy some now. Thx

[@maztergee]

What's Up JB,, thanks very much for the informal video :)

[@bedfordshiremodeller4491]

You need to leave it for 24hours in order for it to fully cure but it does the job alright

[@70diezel]

I have the same kayak and have a puncture on the bottom. So I am going to try this glue. Hope it fixes . Thanks

[@paullopez2278]

can u repair yours?

[@70diezel]

Paul Lopez , hi yes I did and worked. I had a puncture on the bottom and I did exactly as the video showed and turn out really good. I tried the kayak the next day and no issues. Once the glue dries , it looks like silicone seal..

[@70diezel]

I ordered on Amazon and came from U.K.

[@nowthenad3286]

Thank you. Great video. Is the patch still working? Did your glue go off in the tube - I read that it needs to be kept in the freezer if you don't want it to go off.

[@sternzbt]

Thank you very much Justin for sharing this very helpful video!

[@oliverjohn5566]

Hi do you play in Coldplay

[@JBTV]

When I'm not making KZbin videos 👍

[@billosbilly7908]

I have heard it is best to clean the place where the lap goes.

[@TheBeardedAdventurer]

Just brought this product today and then come across your video lol do you suggest using some form of patch with it, like you did? I mean I did get a patch too not sure of the quality of it tho.

[@JBTV]

I've used the patches and they're ok 👍

[@ju5943]

Jazz hands 🥰

[@bigrich6676]

Hello all where can I buy this glue in the uk ??

[@JBTV]

Follow the link in the description 👍

[@vincenzovigvincenzovig1436]

hi, thanks for the video. I have the same new kayak and it already has a puncture in the cauldron and also leaks air from one of the rod holders (along the perimeter of the plastic circle). how could i fix this air leak? thank you

[@JBTV]

Definitely get some of this, hit the link in the description. Just put it around the areas that are leaking, leave it over night, youll be pleased with the result.

[@vincenzovigvincenzovig1436]

@@JBTV ok i try. But for the plastic circle Is Better stormsure o marineweld?Thank you

[@alandolezalek9088]

Yes, I have the same problem, leak from the circular joint on the rod holder. They apparently replaced this with a new type of rod holder. It was a faulty design

[@vincenzovigvincenzovig1436]

@@alandolezalek9088 stormsure isn't good for circular joint on the Rod holder

[@zaidedward2251]

Do you recommend using this product around the valve itself ? as my kayak is leaking air around the valve .

[@JBTV]

It should be fine

[@offdagrid877]

Is the repair still good? Just repaired the 7th hole in my kayak in as many days using uhh pvc glue

[@JBTV]

Yep, still going strong

[@scousescouse395]

Tryed this glue it did not dry what did i do wrong

[@toolmanmakita7120]

Nice i moght need it

[@chazsharpley8400]

The full pack with patches says leave for 12 hours

[@mhoward181]

Not good stuff. Difficult to use and not enough glue. I’d look into either a professional repair v cost to replace.