How to Fix a Stuck Chainsaw Brake

[@EliminatorPerformance]

Go to 4:56 if you have a cover that won't go back on!

[@christophevinson]

Great. Thanks for your help. I 've been struggling for weeks on this brake reset...

[@robertsmyth2796]

Mr. Eliminator, you saved my day. My brake seized cutting a large tree for firewood. My saw is not a Husqua Varna, but it was identical brake system. Carb aerosol cleaner worked great on cleaning the gunk and when cleaned I used small amount of Liquid Wrench aerosol. The 9/16 wrench and screwdriver snapped the seized brake open. Thanks again. - Bob in Arkansas Woods.

[@michaelcheeto6213]

The only brake video that I've found that explains it and shows it being done. It all makes sense.

[@EliminatorPerformance]

Thanks for watching!

[@uriah-s97]

Same

[@craigcummings1348]

I agree with other people who have posted: this was an excellent demonstration and explanation of the chain brake, how to maintain it and how to fix multiple variables to why it might not work properly. Great addition if repair with caution being explained. Great video- just what we needed to hear; no extra chatter (Ha!). Thank you so much.

[@EliminatorPerformance]

Glad you enjoyed it!

[@jodygautreau4982]

Very good video. Excellent details. Followed instructions and had saw fixed and running within 30 min. Saved around $45. Thanks

[@paulhale5317]

I have a Poulan 5020V saw. A few years ago something happened, the brake spring triggered, and I couldn't put the cover back. I didn't understand how the brake worked and so I removed the brake assembly and used the saw that way. I know.... not very smart move. Anyway, since I saved the parts, I thought I'd give it a shot to fix it today. Your video, as so many have commented, was perfect! The trick to use the 9/16ths open-end/ closed-end wrench worked perfectly. Thank you for taking the time to share your experiences!

[@RobinBuchanan-j8n]

I was trying to put my cap on for an hour. I knew that the inner lock was to small to fit over the clutch but didn't know how to expand it. As soon as I seen you turn that 3 pronged dial with the 9/16 wrench and screw driver I knew that's what I needed to do. I did that and my cap fit right back on just like it should. Thanks a million..... It's great that you took the time to show others how to fix this problem. Thanks again.............

[@mjbutterfish]

Too good! Straightforward and no theatrics. Thank you!

[@raysebesian7990]

one of the best self fix it videos I have ever searched for, thanks, you saved me a repair shop bill.

[@kenellison2137]

This is hands down the best video on this issue. Outstanding! You saved me an hour of driving to the repair shop.

[@zydanny]

Thank you. I had this problem just yesterday and wasted half the day trying to guess how to get a cover over a closed brake and finally, as light faded, I found this vid. Brightened my mood considerably.

[@EliminatorPerformance]

Cheers!

[@andrewtravis8678]

Thank you for an informative and well presented video on the workings of a chain saw brake. I had a couple of problems trying to get a new saw chain on my Echo CS400. After watching your video I ran up to my garage and followed the steps you presented. Yesterday I was in tears. Today I'm all smiles looking forward to cutting more firewood. Thanks again. Well done! 👏

[@LycanPaw]

I've spent 3hrs trying to fix this thing. Bloody finger included. Took it apart and all. Figured I'd have to buy a new one. Then by luck, I stumbled across your video and in 5mins it was fixed!!! You sir, are a true Captain!

[@susyforfa]

Thank you so very much for this video. My husband was able to fis our husqvarna 455 rancher without buying parts. You are direct and very informative. Please keep up the great work.

[@facereader99]

Thank you very much! You are a natural teacher. Time to find a student/employee. I got mine in the fourth year in Mississauga, Ontario, Canada.

[@waynestefinashen239]

Yet another well organised, well edited and too the point repair video showing exactly how to fix a problem. Keep them coming!

[@EliminatorPerformance]

Thanks for watching!

[@stevem6711]

I had tripped the spring with the cover off accidently a few years ago and didn't know how to reset it. In order to use the saw I removed the spring and tossed it in my parts tray and forgot about it. After viewing this video, I dug up the spring out of the bin and reassembled. Works as it should now. Thanks!

[@EliminatorPerformance]

Thanks for watching!

[@usernaame1000]

Doesn't that mean you no longer had a brake working?

[@calvinbaldwin4202]

Thank you for this. Helped me out greatly.

[@nateman79]

THANK YOU! Three hours later, I finally got it fixed! New chain cuts like BUTTER. Instead of using a wrench, I was able to turn it with channel locks in case somebody doesn’t have a Vice handy

[@michaelatkins1617]

I knew something was wrong with my brake but I didn’t know what, now I do. 👍🏽👍🏽👍🏽👍🏽

[@dougmacpherson6732]

Fantastic explanation regarding the brake system. Turned out my brake was slightly out of place. Your video has just saved me $ Thank you so much

[@bryantjones8039]

Thanks for the great video. Today I did all the wrong things to my Husqvarna chainsaw. I finally have the break reset. Now I believe all I need is a new chain bar. It on but not as smooth as it should be. TY🎉

[@aidanlawson2147]

My man, you absolutely saved me! This was exactly what I needed to fix my chainsaw. Thank you so much

[@RodneyHillard-y9b]

This save me big time. So close to ordering a new one but too stubborn to do that yet. Glad to not see your face in half of the video like so many do. Thank you.

[@EliminatorPerformance]

Only at the beginning and the end, glad it helped, cheers!

[@essaytee7737]

Trapped two bars with new chains in a tree. Thought they were pinched but I removed the saw (455 Rancher) and saw the brake ring compressed… so stuck on. I’m going to clean it all up and reattach to the bar still in the tree (mid plunge cut) to see if I can get it turning and get the bar and chain out! Thanks for the vid… will let you know how it goes!

[@joedirtrulz8]

Thanks for the video. Couldn't keep the wrench from slipping so I just snugged it back again the brake and manually reset it. Got her together now

[@GavinOliver-q1h]

That's a first class demo. Best I've seen for anything on KZbin. Thanks.

[@muddywaters1934]

Great video...saved me a trip to the small engine repair shop for the exact same problem with my echo

[@jjaponick]

Thank you!! I'm newer to the chainsaw game and could not for the life of me figure out what was going on. Followed this video step for step and it works! I appreciate you!

[@EliminatorPerformance]

Thanks for watching, glad it helped!

[@coastwatch203]

What a fantastic, straight to the point explanation on how to rectify a problem ! Kudos from Australia - much appreciated bro.

[@gitdog1000]

Thanks! I follow your instructions and it worked perfectly. I didn't have a 9/16 wrench, so I used a 1/2 and it worked, too. Thanks again.

[@EliminatorPerformance]

Thanks for watching!

[@matthewmiller8965]

one of the more direct and well done fix it videos I've ever seen.

[@tedski6318]

Thanks so much. I was pulling my hair out trying to reinstall the cover.

[@eltee9547]

Thank you for saving me the cost of replacing the cover on my Craftsman chainsaw. Now I know how the system works and should have my saw back in operation. Thanks for the clear and concise instructions. Cheers!!

[@eltee9547]

I followed your instructions and the cover went right on. Thanks again.

[@timallemong5966]

This was awesome. Have never repaired a chainsaw. This was exactly my problem. Saved me from buying a new one. Much appreciated.

[@EliminatorPerformance]

Thanks for watching, glad it helped!

[@seetomYEG]

Bravo! I caught a piece of ancient barbwire in my saw and had a bear of a time putting everything together. But thanks to your awesome explanations, I'm good to go! 💪

[@jrcflaus]

best chain saw video I've seen. Going to try this in the next few days. thank you for posting.

[@rickysand1900]

This video just saved my arse! I tried everything to reset the brake, and then saw this video. Thank you!!

[@tueetake]

You are a lifesaver, this is exactly what I needed! I did some checking and cleaning on my saw but then got frustrated when the cover didn't fit anymore. This video explained it all! Thanks so much!

[@EliminatorPerformance]

Thanks for watching!

[@garyhouston3134]

Perfect

[@bleulewchi7491]

@@EliminatorPerformance nice explain,,mine is not moving either.. Tomorrow I'm gonna do this step by step..Thanks for explaining the problem!!...

[@ronaldschiavo6932]

I have an echo cs 440 18inch chainsaw can't get new chain on it's a piece of junk worst saw I ever owned

[@558vulcanxh]

Thanks for a very instructive video. I can't pull my engine over with the brake engaged so this should be very helpful 😊 thanks again Sir

[@edwardmarks1766]

Very straightforward without all the hyperbole. Well done!

[@jhlasound]

This is a great video. Right to the point. All the facts no nonsense. Thank you for doing it right.

[@tcc4551]

Concise...keep this guy in your history.

[@cienfield1952]

Terrific. Exactly the issue I was dealing with. Thanks for helping me fix my Husqvarna.

[@ginnglassblock]

Great instructions and straight to the point. Thank you!

[@LesHudson-nv8tv]

Ever so grateful for this! Spent an hour pulling out my hair and gave up resorting to KZbin University. This video was THE RIGHT ONE! thank you

[@M1Y4MUS4SH1]

exactly what happen to me today...i noticed the problem at once but im noob on chainsaws machine (my father use it)..so i couldnt understand why its stucked..parts seemed not broken or missed something...i didnt find any broken part but it was very dirty..ur video will help me reinstall and clean it...thanks man..(i have an italian chainsaw but its almost the same)

[@tsporttsman]

Refreshing to actually get useful help. This guy is great!

[@daveolliemetalhead]

Thank you for your video very helpful I bought a brand new chainsaw used it two times and the brake seized up doing what you said on the video

[@lauriedavis800]

Excellent , I like the way you edit out the screw removal and replacement, makes it neater.

[@chrisc6874]

Thanks. Good info. I didn't even use a vise though. Works right on a table

[@johneubanks5951]

Good knowledge.. thanks for the video..worked perfectly for tripping this Jonsered saw I picked up for $10 bucks at a yard sale...saw works good now ..🤘🇺🇸

[@robertmatheson9542]

AWWWW, I spent two hours trying to get the cover back on the saw and I failed. After I watched your video and it showed me about locking the spring back on the brake. it all made sense. Should have watched before starting . I expect successful reassembly. who would have known that I have to reset the spring to release tension on the brake spring. . Oh well lesson learned.

[@larryharrissr.5642]

Great demonstration, very thorough explanation

[@bobppappap4687]

Excellent video I knew it was something simple. Thanks for the video

[@wetdewlap8741]

Omgod I can’t tell you how many videos I had to watch to get this answered!!!! Thank you sooo much!!!!!! Problem solved!!!!!

[@EliminatorPerformance]

Thanks for watching!

[@BarrySullivan-v9s]

Many thanks! Video was spot on with helpful tips and clear instructions.

[@rossnaheedy3400]

Thanks so much. I have a Tanaka, but your video explained the purpose and the mechanics of the brake band which helped me fix my issue.

[@DXT61]

That happens a lot to folks who force the cover off while the brake is on and they are stuck. That spring tension is stronger than it looks too, you cant just take a flat head screwdriver and pop it over. The wrench was a great idea.

[@EliminatorPerformance]

Thanks for watching!

[@JohnBowden-z9u]

Thanks that helped I can now get the cover easier now and it works 😊

[@yamarachin3793]

I needed this, thank you for the nice and awesome explanation, now I try to fix mine.

[@CesarFlores-m4l]

Good video fully explaining the parts and system.Thanks a lot my friend.

[@lulfukuslilfidde4107]

Yeah I’m the dumbass that left the brake locked and spent waisted time getting the cover off!!! And then waisted hours trying feebly to get it back on, all the while I could have walked 50 yards back to my camp and watched your video!!!! Now I’ll try to get the spring back in place after it went shooting into the woods , waistline more time 😖😖😖 Thanx and subscribed!

[@t36285]

Great video; straight to the point with clear instructions. You deserve 100x more subscribers.

[@EliminatorPerformance]

Thanks for the kind words Tyler, and thanks for watching!

[@karimbasset9913]

very helpful thank you so much. I do have a question, when I engaged the brake, the chainsaw stalls! any idea on what that could be?

[@KTMGUNNER]

Awesome, my saw seized up and I watched your video and I fixed it!! Perfect !! Thank you 😊

[@EliminatorPerformance]

Thanks for watching, glad it helped!

[@garyhynd3620]

Excellent video. I used your technique and it worked perfectly.

[@EliminatorPerformance]

Thanks for watching!

[@lancekikumoto1172]

Excellent video 👍 well done,and we’ll explained. Mahalos 🤙🏾

[@darrenadams1555]

Well done cheers saved me from throwing me saw in the river , very well explained I have never seen a brake like this and it is too simple once shown how cheers 👍👍👍😁🇦🇺🇦🇺

[@Jerryrigger-jn6bi]

Just what I needed, thank you.

[@rideoutdoors5799]

This video is perfect for release brake !!!!!

[@juliuscorley5142]

Outstanding video show me exactly help to reset chain brake

[@pa53]

Just have to say thank you, the literal perfect video - thanks bro!

[@kimjungho1205]

Thanks. You saved me a lot of time.

[@ClassicRollPlayer]

Perfect! This was my problem... thanks so much!

[@tonyalways7174]

Fabulously clear explanation and punchy succinct video with no padding. Subscribing to see more. 👏🏻👏🏻👏🏻

[@MountaineerMapleDIY]

Great video. Helped me out a bunch!

[@johnneperez5408]

Thanks for being Awesome at what you do and sharing it.

[@charlesstokes6190]

My hero of the day! Thanks so much!?!

[@Bandits_68]

You're a legend. Thanks so much for a well explained, detailed video. You saved me $$ 😁

[@christinelathigee4340]

I should have watched this video before I started getting mad, lol. Thanks for easy to follow video.

[@EliminatorPerformance]

Thanks for watching!

[@SmallTownBigWorld]

Thank you thank you thank you for being concise and doing a great walkthrough video!

[@EliminatorPerformance]

Thanks for watching!

[@KilroyWuzhere-mv6hz]

Great video and exactly my issue and chainsaw. Thanks so much!

[@EliminatorPerformance]

Glad to help

[@mkhulusizwedlamini7608]

So much detailed information❤

[@AshleyNickerson-qf8qp]

Thank you! Exactly what I needed to know

[@shanedavison7473]

I didn't have the cleaning machine si I sprayed the break with carborator cleaner over a sheet of cardboard to clean it and then I lubricated it with liquid wrench. I removed the break handle from the chainsaw and used the turning mechanism to turn the break and it worked.

[@BuhlzI]

Your brilliant! That was my exact problem. Mucho Gracious!

[@stephenball7048]

Wish I had watched this before going to the repair shop!!!

[@MXRiderFiftyTwo]

A great easy to understand video.

[@StephMeu]

as many other people here : thanks very much for this video !

[@sh1ner128]

Thank You. You saved my week.👍

[@anthonysmith8155]

Very well done video. Very detailed and informative. Thanks a lot I now know exactly why my saw brake is not working

[@calvinbaldwin4202]

Thank you for this it helped me out greatly

[@garyhouston3134]

Great presentation!!!!

[@slimrr4]

very good tutorial, cheers from ireland!!

[@EliminatorPerformance]

Thanks for watching!

[@ashleybruton7076]

Awesome is this the same for echo

[@dennisbosworth3665]

Thank you Eliminator - you saved my bacon!

[@geof2001]

Seem to have the opposite problem on mine. By this I mean the brake does not engage in any position. I haven't taken the cover off but i'm guessing the brand may be broken? What else could it be? It's just a light duty homelite which I use around the yard only.

[@jeanchery7246]

Very good 👍 and learned something 👌 thanks

[@velox731]

Nice work! So much valuable information.

[@EliminatorPerformance]

Thanks for watching!

[@Crokuz]

Thanks, man. Really informative stuff.