HOW TO FIX A WASHER THAT BOUNCES AND CANNOT FISHING SPIN CYCLE BY REPLACING SHOCKS

[@AutoRepairGuys]

Products that we use and recommend: ► Shocks 1 pair ( check part number for your washer): amzn.to/2UZBPEs ► Shocks the other pair ( check part number for your washer): amzn.to/2yDPauH ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics

[@mr.planter494]

LITERALLY LY THE GUY THAT TEACHES ME HOW TO FIX MY CAR! The washer machine just broke. crazy to end up on your channel. Thanks for all the Chevy Cruze Videos!

[@Coinfox]

Wow I went from watching a rapair for my benz to fixing my washer.. You're a beast!

[@FishyMushroomz]

Just a tip for those who find the bottom washer opening is just way too tight for them, it's a somewhat easier to access every single bolt that needs to be removed on these shocks from either the back panel or front panel of the washing machine (However, you do have to remove the front cover). There are 4 holes on the back panel, and 4 on the front specifically for the shocks. You will need a 13 mm socket as well as a 6" extension to reach them all.

[@davedeatherage4902]

Thank you sir for variation from the Automotive repair, it breaks up the monotony, and a valid need to know task. A long time sub, keep up the great work, keeping the car running, and keeping the wife happy with washing machine repair, if moma is happy, then we're all happy 👍✌️

[@harleyperez8393]

Thanks helping me to fix my porsche and now my washer, nice job

[@tonygeros3093]

Very good advice, one of the best fix it videos I've seen

[@ravin6830]

Thanks for an expertly done video

[@wirenchangoer4101]

Great DIY, safes a lot of money and is not that hard to swap out.

[@bran1214]

buddy thanks a lot for your help very clear and to the point

[@joannandablo5635]

Thank you we just got a new LG washer and I was wondering why

[@stephenkelly5642]

Brilliant video please make more

[@abh114]

Thk you for the video

[@kobacljuti6751]

I need to remove my fireplace insert. Can you make a video of it?

[@jamespassas9441]

Interesting that your machine has 4 shock absorbers, rather than 2. It seems to be the case for larger machines. Also noticed thatyour machine has separate hot & cold water inlets. Most UK machines used to have these.

[@DrColg8]

It's either the worn shocks or spider arm. These spider arms fail because of high Zinc content of spider arm (corroded via Galvanic shock). Having worn shocks will cause the weakened spider arm to fail more quickly. But... it may be too late for yours :(... and my own.

[@MonoChorMe]

Might I ask but... where do you originally come from? I might be mistaken, but in the video I saw you wearing something closely resembling a Martenica (Мартеница)??? Just curious... :)

[@OneandOnlyNeo]

Guys guys guys guys !! Favorite word of yours 😂

[@leroijr407]

You guys rock. I watch you for auto. Your very awesome and seem bery kikd humble and loving. Do yku have time to talk about our Lord and Savior Jesus Christ?

[@AboJassar2011]

Part number please

[@boatburnerice7925]

yellow shocks to the back?

[@ssn608]

Thank you for this video. However, I have an LG front loading washer, and found another KZbin video specific to the LG washers (kzbin.info/www/bejne/jpC3amuNodylj6s) which was really quite good... had additional suggestions such as checking that the leveling feet are properly adjusted, checking which side of the machine the computer/electrical boards are on, and laying the machine on the opposite side (I noted that even though you said you had turned your machine upside down, you had actually just laid it on a side, so you could access the bottom) . He also suggested just putting some bearing grease on the lower (exposed metal rod part of the shock), rather than replacing them. So far... that has worked for me.

[@vicious7569]

Bro I thought those were car shocks that he was gonna put inside it & turn it on 🤣

[@paulness8352]

The rrsistance looksd the same.

[@amalik6303]

Looks like same shakes

[@seshubabu6]

Srevice

[@terryt9153]

Nothing but a ripoff, it is nothing more than dampening grease used in the cylinders!! Get some off ebay and just re-grease when they start going bad!!!

[@qdogggp]

How so?

[@terryt9153]

@@qdogggp after some deep research, I figured out that the manufacturers use a type of grease called "dampening grease" it just has a heavier consistency to it and works like a shock absorber, very clever!!!!!

[@qdogggp]

@@terryt9153 thanks for the response. I bought new ones and they were the same as the old ones.

[@lienzednem1348]

how do you remove the top

[@lienzednem1348]

thumbs down for me

[@joeybarela363]

You just slow bro